Publications Repository - Helmholtz-Zentrum Dresden-Rossendorf
Institute | Leading institute | |
---|---|
FS | FK | FW | FWI | FWP | FWK | FWO | FWD | FWH | FWG | FWM | FWU | FWZ | FWF | FWC | FKT | ||
Year | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | <=2018 | |
Type of publication | Articles ref. in Journals | Conference abstracts in ref. journals | Books | Proceedings | Wissenschaftlich-Technische Berichte/ HZDR-Reports | Lectures | Posters | Patents | Research data | Software | RODARE publications | |
Open Access | Yes | No | |
Search |
"Online First" included
Approved and published publications
Only approved publications
41875 Publications
Target mass number dependence of subthreshold antiproton production in proton-, deuteron- and alpha-particle-induced reactions
Müller, H.; Komarov, V. I.
Abstract
Data from KEK on subthreshold antiproton as well as on π± and K± production in proton-, deuteron- and alpha-particle-induced reactions at energies between 2.0 and 12.0 AGeV for C, Cu and Pb targets are described within a unified approach. We use a model which considers a nuclear reaction as an incoherent sum over collisions of varying numbers of projectile and target nucleons. It samples complete events and thus allows for the simultaneous consideration of all final particles including the decay products of the nuclear residues. The enormous enhancement of the antiproton cross section, as well as the moderate increase of meson production in deuteron and alpha induced compared to proton-induced reactions, is well reproduced. In our approach, the observed enhancement near the production threshold is mainly due to the contributions from the interactions of few-nucleon groups.
- Journal of Physics G: Nuclear and Particle Physics 31 (2005) 285-293
Permalink: https://www.hzdr.de/publications/Publ-6844
Increased magnetic damping of permalloy upon Cr implantation
Fassbender, J.; McCord, J.; Weisheit, M.; Mattheis, R.
Abstract
The understanding and the modification of the magnetic damping processes in thin ferromagnetic films has gained considerable interest in recent years. In addition to applied research on ultrafast magnetization reversal [1-3] also studies concerning the basic damping phenomena [4,5] and their modification by means of adjacent non-magnetic layers [6] or alloying [7] have been reported. Also the use of ion implantation to modify magnetic properties on a local scale has been addressed [8].
Here we report on investigations of the static and dynamic magnetic properties of 20 nm thick permalloy films as prepared and after 30 keV Cr implantation with different Cr fluences. Due to the doping the Curie temperature of the permalloy film decreases with the implantation fluence. At an averaged Cr concentration of about 7% (≈ 1.4·10^16 Cr/cm^2) the Curie temperature drops below room temperature. The uniaxial anisotropy, induced by a magnetic field during deposition, decreases but persists with increasing Cr fluence as indicated by the 2-fold symmetry of the magnetic remanence as a function of in-plane angle measured by magneto-optic Kerr effect magnetometry.
In order to investigate the magnetization damping pulsed inductive microwave magnetometry (PIMM) has been performed for various applied magnetic fields. In Fig. 3 the magnetization traces for the as-deposited permalloy film as well as the Cr-implanted samples are shown for an applied field of 10 Oe. Upon Cr implantation the PIMM amplitude is decreased consistent with a decrease in the uniaxial anisotropy AND a reduction in saturation magnetization. This results in a decrease of the precession frequency which is easily observed. However, the magnetic damping, i. e. the relaxation of the precession, is also altered by the Cr implantation. A detailed analysis of the damping parameter leads to 7-fold increase of the damping for only 4% of Cr doping. In order to clarify the basic mechanism for the enhancement the chemical and structural contributions to the magnetic damping parameter are separated.
References
[1] T. Gerrits, H. A. M. van den Berg, J. Hohlfeld, O. Gielkens, L. Bär, Th. Rasing, Nature 418, 509 (2002).
[2] S. Kaka, S. Russek, Appl. Phys. Lett. 80, 1958 (2002).
[3] H. W. Schumacher, C. Chappert, P. Crozat, R. C. Sousa, P. P. Freitas, J. Miltat, J. Fassbender, B. Hillebrands, Phys. Rev. Lett. 90, 017201 (2003).
[4] D. L. Mills, S. M. Rezende, Topics in Applied Physics 87, 27 (2003).
[5] B. Heinrich, in Ultrathin Magnetic Structures III, IV, edited by B. Heinrich and J. A. C. Bland (Springer-Verlag, Berlin, 2003).
[6] S. Mizukami, Y. Ando, T. Miyazaki, Jap. J. Appl. Phys. 40, 580 (2001).
[7] S. G. Reidy, L. Cheng, W. E. Bailey, Appl. Phys. Lett. 82, 1254 (2003).
[8] L. Folks, R. E. Fontana, B. A. Gurney, J. R. Childress, S. Maat, J. A. Katine, J. E. E. Baglin, A. J. Kellock, J. Phys. D: Appl. Phys. 36, 2601 (2003).
Keywords: magnetism; ion implantation; doping; magnetic damping; Curie temperature; PIMM; magnetization dynamics
-
Lecture (Conference)
Intermag 2005, Nagoya, Japan
Permalink: https://www.hzdr.de/publications/Publ-6843
Structural phase transformation of FePt nanoparticles by ion irradiation
Rellinghaus, B.; Dmitrieva, O.; Liedke, M. O.; Fassbender, J.
Abstract
Owing to its large magneto-crystalline anisotropy energy, L10 ordered tetragonal FePt is among the most intensively discussed materials when it comes to pushing the superparamagnetic limit towards minimum particle sizes for future ultra-high density magnetic data storage media [1]. Depending on the preparation technique, however, the formation of the L10 thermodynamic equilibrium phase is often impeded by either a lack of thermodynamic driving forces or a lack of diffusivity.
Recently it has been shown [2,3] that gas phase prepared FePt nanoparticles can exhibit a very narrow size distribution with a mean diameter of roughly 6 nm. Together with a packing density of 2.8 × 10^12 particles /cm^2 a potential data storage density of 18 Tbit/inch^2 could be achieved. Unfortunately these particles are superparamagnetic at room temperature due to their multiply twinned icosahedral structure. Therefore it is of essential importance to transform these nanoparticles into the favourable L10 phase in a post-deposition treatment. Since annealing usually results in sintering of adjacent particles, a possible alternative is the use of ion irradiation techniques to create vacancies within the particles and thereby enhance the bulk diffusion of the constituents which has been successfully demonstrated to promote the L10 ordering in the case of FePd films [4].
In the present study, post-deposition 5 keV He irradiation has been performed on such gas phase prepared FePt nanoparticles. Structural characterization of the samples was carried out by means of High Resolution Transmission Electron Microscopy (HRTEM). Fig. 1 shows the HRTEM micrographs of two typical Fe42Pt58 particles with a mean diameterof dP = 6.2 nm. The power spectra as obtained by Fourier transform of the original images (see insets in Fig 1) clearly evidence that the particles are multiply twinned and of icosahedral structure. In Fig. 2, two typical HRTEM micrographs of particles are presented which had been subjected to irradiation with 5 keV He ions at a fluence of f = 3×10^17 ions/cm2. The particles are no longer multiply twinned but rather single crystal fcc, and their mean diameter is reduced to dP_irr = 5.2 nm. This size reduction is ascribed to irradiation induced sputtering of the particles. Although the defect concentration apparently increases the atomic diffusivity temporarily to an extent that allows for structural transformations in the FePt nanoparticles at RT, no L10 ordered particles have been observed. This observation is in contrast to the bulk phase diagram [5], theoretical calculations [6], and thermodynamic investigations in thin films [7], based on which the L10 phase is expected to be energetically favoured over the fcc phase by some 0.1 eV/atom.
There are two possible origins for the experimental findings. Either the particles investigated are already smaller than a critical particle size below which the L10 phase is no longer the thermodynamic equilibrium phase in FePt, or kinetic aspects may be of increasing importance at these length scales. Since the sputtering process that comes along with the ion irradiation is element specific and tends to remove more iron than platinum atoms, the He ion irradiation results in a shift of the elemental composition of the FePt nanoparticles towards a more Pt-rich concentration. As a consequence, the remaining alloy approaches the borderline of the L10
stability region in the phase diagram. Concurrently, the thermodynamic ordering temperature is reduced and the chemical driving force for the L10 ordering will be significantly reduced.
References
[1] D. Weller, A. Moser, L. Folks, M.E. Best, W. Lee, M.F. Toney, M. Schwickert, J.-U. Thiele, and M.F. Doerner, IEEE Trans. Mag. 36, 10 (2000).
[2] S. Stappert, B. Rellinghaus, M. Acet, and E.F. Wassermann, J. Cryst. Growth 252, 440 (2003).
[3] B. Rellinghaus, S. Stappert, M. Acet, and E.F. Wassermann, J. Magn. Magn. Mater. 266, 142 (2003).
[4] H. Bernas, J.-Ph. ...
Keywords: magnetism; structure; phase transformation; nanoparticles; L10-structure; HRTEM; binary alloys
-
Lecture (Conference)
Intermag 2005, Nagoya, Japan
Permalink: https://www.hzdr.de/publications/Publ-6842
Small and large angle precession in exchange biased bilayers
Weber, M.; Nembach, H.; Hillebrands, B.; Fassbender, J.
Abstract
Small and large angle excitations in exchange bias systems have been investigated in real time by means of all-optical pump-probe experiments. Time resolved magneto-optics has been employed as a probe of the transient magnetic phenomena upon laser excitation. Due to an increased spin temperature upon photoexcitation, an unpinning of the interfacial exchange coupling takes place resulting in a collapse of the unidirectional anisotropy. An effective internal anisotropy pulse field with a rise time of the order of the pump laser pulse duration (τ =8.3 ps) is launched which governs the time evolution of the effective field acting on the magnetization of the ferromagnetic layer of the bilayer system. The time evolution of the exchange bias shift field and the zero-field susceptibility reveal a fingerprint of the internal field pulse and can be understood taking ultrafast thermal activation into account [1]. The excess energy of the spin system - upon a sudden increase of the interfacial spin temperature can lead to the excitation of a high frequency precessional response of the magnetization of the ferromagnetic layer for both the easy and the hard axis geometry [2,3]. Even, the initial deflection direction of the magnetization of the ferromagnet away from the initial equilibrium orientation can be controlled on the picosecond timescale in the hard axis geometry. The magnitude of the internal pulse field, and thus the torque acting on the magnetization of the ferromagnetic layer, can be controlled by the absorbed photons [3]. Hence, the precessional motion depending on the magnitude of the anisotropy pulse field, i.e., the precession angle can
be investigated. Moreover, by comparing the measured real time precessional motion with solutions of the Landau-Lifshitz and Gilbert equation the dependence of the effective Gilbert parameter α on the precession angle can be studied. The extracted Gilbert parameter depends not or only rather weakly on the magnitude of the internal pulse field. There are no non-linear effects present for this material system. Both small and large angle precession of the ferromagnetic layer upon photoexcitation can be modeled with reasonable values of the Gilbert parameter within the Landau-Lifshitz and Gilbert framework.
Employing the known antiferromagnetic thickness dependence of the exchange bias field Heb, the exchange bias field dependence of the Gilbert parameter α was investigated. For this purpose a wedge shaped exchange bias bilayer with a fixed thickness of the ferromagnetic layer and a varying thickness of the antiferromagnetic layer along the sample was prepared and measured.
The extracted Gilbert parameter from the time-resolved Kerr traces and thus, the dissipation rate increases linearly with the exchange bias field magnitude. Local fluctuations of the interfacial exchange coupling, due to interface roughness, can increase the two-magnon relaxation probability, which in terms of an additional dissipation channel finally leads to an increased Gilbert damping parameter [4,5].
The work is supported by the Graduiertenkolleg 792 of the Deutsche Forschungsgemeinschaft and the European Communities Human Potential programs HPRN-CT-2002-00318
ULTRASWITCH and HPRN-CT-2002-00296 NEXBIAS.
References
[1] M.C. Weber, H. Nembach, and J. Fassbender, J. Appl. Phys. 95, 6613 (2004).
[2] G. Ju, A. V. Nurmikko, R.F.C. Farrow, R.F. Marks, M.J. Carey, and B.A. Gurney, Phys. Rev. Lett. 82, 3705 (1999).
[3] M.C. Weber, H. Nembach, B. Hillebrands, and J. Fassbender, Phys. Rev. B, submitted for publication.
[4] S.M. Rezende, A. Azevedo, M.A. Lucena, and F.M. de Aguiar, Phys. Rev. B 63, 214418 (2001).
[5] M.C. Weber, H. Nembach, B. Hillebrands, and J. Fassbender, J. Appl. Phys, in press.
-
Lecture (Conference)
Intermag 2005,4.-8.4.2005, Nagoya, Japan
Permalink: https://www.hzdr.de/publications/Publ-6841
Magnetic anisotropy patterning of amorphous films by He-ion irradiation
McCord, J.; Gemming, T.; Schultz, L.; Fassbender, J.; Liedke, M. O.; Frommberger, M.; Quandt, E.
Abstract
The magnetic anisotropy in amorphous soft magnetic CoFeSiB films is modified by He-ion irradiation. A rotation of uniaxial anisotropy depending on the applied field direction in the irradiated areas is observed by magnetometry and complementary domain observation by Kerr microscopy. No significant degradation in magnetic properties relative to the as-deposited state is found from the magnetization loops on non-patterned films. Using irradiation together with photolithography the films were treated locally, resulting in anisotropy patterned structures. Complicated periodic domain patterns form due to the locally varying anisotropy distribution. Overall magnetic properties and domain patterns can be adjusted.
Keywords: magnetism; ion irradiation; magnetic anisotropy; patterning; amorphous alloys; Kerr microscopy; magnetic domains
- Applied Physics Letters 86(2005), 162502
Permalink: https://www.hzdr.de/publications/Publ-6840
Spectroscopic Characterization of Pd Nanoclusters Formed by S-Layer of B. sphaericus JG-A12 and Biocers
Merroun, M.
-
Lecture (others)
BIO-CAT Project Meeting, 05.11.2004, Paris, France
Permalink: https://www.hzdr.de/publications/Publ-6838
Damping in thin ferromagnetic films
Nembach, H.; Martin-Pimentell, P.; Weber, M.; Fassbender, J.; Hillebrands, B.
Abstract
The understanding of the damping processes of the magnetization dynamics is an important issue. Several different damping channels are proposed. Here the importance of magnon-magnon processes for the damping is investigated with a magneto-optical method. This method allows to determine the length of the magnetization vector and therefore gives an indication for magnon-magnon processes. Higher order magneto-optic effects are also taken into account, which allows the determination of the quadratic magneto-optic constant.
This work was supported by the DFG-Graduiertenkolleg 792 and the EU-RTN ULTRASWITCH network (HPRN-CT-2002-00318).
Keywords: magnetism; magnetic damping; damping processes; time-resolved techniques
-
Lecture (Conference)
DPG Frühjahrstagung 2005, Berlin
Permalink: https://www.hzdr.de/publications/Publ-6835
The modelling of positron emitter production and PET imaging during carbon ion therapy
Pönisch, F.; Parodi, K.; Hasch, B. G.; Enghardt, W.
Abstract
At the carbon ion therapy facility of GSI Darmstadt in-beam positron emission tomography (PET) is used for imaging the ß+-activity distributions which are produced via nuclear fragmentation reactions between the carbon ions and the atomic nuclei of the irradiated tissue. On the basis of these PET images the quality of the irradiation, i.e. the position of the field, the particle range in vivo and even local deviations between the planned and the applied dose distribution, can be evaluated. However, for such an evaluation the measured ß+-activity distributions have to be compared with those predicted from the treatment plan. The predictions are calculated as follows: a Monte Carlo event generator produces list mode data files of the same format as the PET scanner in order to be processed like the measured ones for tomographic reconstruction. The event generator models the whole chain from the interaction of the projectiles with the target, i.e. their stopping and nuclear reactions, the production and the decay of positron emitters, the motion of the positrons as well as the propagation and the detection of the annihilation photons. The steps of the modelling, the experimental validation and clinical implementation are presented.
-
Physics in Medicine and Biology 49(2004), 5217-5232
DOI: 10.1088/0031-9155/49/23/002
Cited 112 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6834
Hydrophile 99mTc/188Re-Komplexe zur Kopplung an Biomoleküle
Schiller, E.; Pietzsch, H.-J.; Seifert, S.; Bergmann, R.; Kraus, W.; Spies, H.
-
Lecture (Conference)
11. Jahrestagung der AG Radiochemie/Radiopharmazie, Leipzig, 18.-20.09.2003 -
Poster
GDCh-Jahrestagung 2003, München 07.-10.10.2003
Permalink: https://www.hzdr.de/publications/Publ-6833
CoSi2 nanowires synthesized by FIB
Bischoff, L.; Schmidt, B.; Akhmadaliev, C.
Abstract
Nanowires and chains of nanoparticles are of emerging interest in nanoelectronics, nano-optics and plasmonics as well as for their monolithic integration into microelectronic devices. CoSi2 is a promising material due to its CMOS-compatibility microelectronics technology. Two fabrication methods of CoSi2 -nanowires by using ion beam synthesis (IBS) with Focused Ion Beams (FIB) technique are presented. In a first approach, an oxide layer, structured by sputtering with a focused Ga+ ion beam, have been used as an implantation mask for large area homogeneous Co+ implantation. Alternatively, a mass separated FIB of cobalt ions, emitted from a Co36Nd64 alloy liquid metal ion source, is applied for a direct writing IBS process. Implantation into Si with doubly charged Co+ ions emitted from the Co source allows ion energies up to 60 keV, which result in CoSi2 nanostructures buried in silicon. The processes of damaging and annealing of the substrate due to extremely high current density of the FIB were investigated. The fabrication of nanowires down to 30 nm diameter has been demonstrated.
Keywords: nano-wire; Focused Ion Beam; cobaltdisilicide
-
Poster
Tagung der Deutschen Physikalischen Gesellschaft 03. - 09. 03. 2005 Berlin
Permalink: https://www.hzdr.de/publications/Publ-6832
Modifikation der strukturellen und magnetischen Eigenschaften von Permalloy-Schichten bei Cr-Implantation
Fassbender, J.; von Borany, J.; Potzger, K.; Grötzschel, R.; Mücklich, A.
Abstract
Die magnetischen und strukturellen Eigenschaften von Permalloy-Schichten lassen sich gezielt durch Cr-Implantation modifizieren. Dazu
wurde ein 20 nm Permalloy/5 nm Tantal/SiOx/Si Schichtsystem mit 30 keV Cr-Ionen im Dosisbereich zwischen 2×10^15 und 2×10^16 Ionen/cm^2
implantiert. Daraus resultiert ein Implantationsprofil mit einer mittleren Konzentration an Cr innerhalb der Permalloy-Schicht von 1 bis 10
%. Die Änderungen in der Schichtstruktur wurden mit Röntgenbeugung, Auger-Tiefenprofilanalyse, Rutherford-Backscattering und Querschnitts-
Transmissions-Elektronenmikroskopie untersucht. Neben der eigentlichen Implantation wird schon bei relativ kleinen Ionendosen eine Durchmischung
der Grenzfläche zwischen Permalloy und Tantal beobachtet. Mit steigender Ionendosis diffundiert Tantal zunehmend an die Oberfläche des Schichtstapels. Diese experimentellen Ergebnisse werden gut durch TRIDYN-Simulationen beschrieben [1].
[1] Transport and Range of Ions (Dynamic): W. Möller, W. Eckstein, Nucl. Instr. and Meth. B 2, 814 (1984).
Keywords: magnetism; permalloy; ion implantation; TRIDYN; XRD; RBS; TEM
-
Poster
DPG-Frühjahrstagung 2005, Berlin, 4.-9.3.2005
Permalink: https://www.hzdr.de/publications/Publ-6831
Magnetic domain structure of micro-patterned PtMn/NiFe exchange bias bilayers
Potzger, K.; Bischoff, L.; Liedke, M. O.; Hillebrands, B.; Rickart, M.; Freitas, P.; McCord, J.; Fassbender, J.
Abstract
A bottom pinned exchange bias bilayer system consisting of 20 nm PtMn and 6 nm NiFe (produced using ion beam deposition (IBD) and physical vapour deposition (PVD, magnetron sputtering)) was laterally magnetic patterned by means of focused ion beam irradiation (FIB) on a micrometer scale. 25 keV ion irradiation with a fluence of
2×1014Ga+·cm−2 leads to a disordering of the as prepared chemically ordered PtMn-phase with only minor changes in sample topography. Thus the exchange bias field as well as the coercive field was reduced to a large extent on a local scale. The magnetic properties of FIB written 1µm wide stripes and their interaction with the non-irradiated spacing were analyzed by means of magneto-optic Kerr effect, magnetic force microscopy, and Kerr microscopy. The application of a magnetic field between -12
Oe and -80 Oe with respect to the exchange bias field direction leads to an antiparallel alignment of irradiated and non-irradiated stripes forming pronounced domain walls. A parallel alignment was found below -100 Oe and in the positive field region.
Keywords: magnetism; exchange bias; chemically ordered alloys; MFM; patterning
-
Poster
DPG-Frühjahrstagung 2005, Berlin, 4.-9.3.2005
Permalink: https://www.hzdr.de/publications/Publ-6830
Modifikation der magnetischen Dämpfung in Permalloy-Schichten durch Cr-Implantation
Fassbender, J.; McCord, J.; Weisheit, M.; Mattheis, R.
Abstract
Das magnetische Dämpfungsverhalten, die Curie-Temperatur und die uniaxiale magnetische Anisotropie von 20 nm dicken Permalloy-Schichten wurde mittels Cr-Implantation modifiziert. Die Implantation wurde bei 30 keV Beschleunigungsspannung im Dosisbereich zwischen 2×10^15 und 2 × 10^16 Ionen/cm2 durchgeführt. Daraus resultiert ein Implantationsprofil mit einer mittleren Konzentration an Cr innerhalb der Permalloy-Schicht von 1 bis 10 %. Bei einer mittleren Konzentration von ca. 7% wird die Curie- Temperatur der Permalloy-Schicht auf Raumtemperatur abgesenkt. Damit einher geht eine leichte Verringerung der uniaxialen magnetischen Anisotropie. PIMM-Messungen (pulsed inductive microwave magnetometry) zeigen jedoch eine starke Vergrösserung des magnetischen Dämpfungsverhaltens durch die Cr-Implantation. Die möglichen Ursachen dieser Erhöhung werden diskutiert.
Keywords: magnetism; magnetization dynamics; ion implantation; magnetic damping; magnetic anisotropy; permalloy
-
Lecture (Conference)
DPG Frühjahrstagung 2005, 4.-9.3.2005, Berlin, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-6829
Anisotropy patterning of amorphous CoFeSiB films by Heion irradiation
McCord, J.; Fassbender, J.; Frommberger, M.; Liedke, M. O.; Quandt, E.; Schultz, L.
Abstract
The alteration of magnetic properties in magnetic thin films by ion radiation has gained increasing attention in recent years. Here, we present data on the local alteration of the magnetic anisotropy axis in amorphous soft magnetic FeCoBSi films by He-ion irradiation in an applied magnetic in-plane field. Sputtered CoFeSiB (thickness 30 nm) were irradiated with 5 keV He-ions. A magnetic field of 600 Oe was applied during irradiation aligned orthogonal to the initial easy axis of anisotropy. Above a critical fluence an alignment of anisotropy in the applied field direction is observed by MOKE magnetometry and complementary domain observation by Kerr microscopy. Using irradiation together with photolithography the films were irradiated locally, thus resulting in anisotropypatterned structures. Domain patterns in different elements with varying angles of anisotropy and edge orientation, separating regions of different anisotropy alignment, are shown. The influence of the patterning on the (still) full film reversal is discussed in detail.
Keywords: magnetism; amorphous films; magnetic anisotropy; He ion irradiation; patterning
-
Lecture (Conference)
DPG Frühjahrstagung 2005, 4.-9.3.2005, Berlin, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-6828
Real-time evolution of the ITO film properties and structure during annealing in vacuum
Rogozin, A.; Shevchenko, N.; Vinnichenko, M.; Prokert, F.; Cantelli, V.; Kolitsch, A.; Möller, W.
Keywords: Indium Tin Oxide; annealing; structure; in-situ studies
-
Other report
ESRF Highlights 2004
Permalink: https://www.hzdr.de/publications/Publ-6827
X-ray and Neutron Scattering studies of NiMn-CoFe exchange bias systems
Solina, D.; Lott, D.; Kaltofen, R.; Schumann, J.; Fassbender, J.; Tietze, U.; Schreyer, A.
Abstract
Preliminary results are presented on the structural and magnetic properties of epitaxial antiferromganetic NiMn and their correlation to the Exchange Bias Effect. Included are x-ray diffraction, reflection and rocking curves of pertinent diffraction peaks. The rocking curves have a FWHM of less than 3 indicating good epitaxial growth of the film. Polarized neutron reflectivity and high angle scattering measurements have been made in order to assess the magnetic properties of the system.
Keywords: magnetism; exchange bias; XRD; neutron diffraction
-
Poster
DPG Frühjahrstagung 2005, Berlin, 4.-9.3.2005
Permalink: https://www.hzdr.de/publications/Publ-6826
Magnetic domain structure of micro-patterned PtMn/CoFe exchange bias bilayers
Liedke, M. O.; Potzger, K.; Hillebrands, B.; Rickart, M.; Freitas, P.; Fassbender, J.
Abstract
Using magnetron sputtering deposition a number of high exchange bias field samples were prepared for magnetic pattering investigations. The system prepared is as follow: glass/Ta 70 °A/PtMn 200 °A/ tCoFe = 20 - 60 °A/Ta 40 °A. One of such bottom pinned samples with 40 °A of CoFe was used for optical lithography. Several patterns have been etched physically with decreasing lateral sizes of either the edges or the spacing between the elements. The largest square is 50 × 50 µm and the smallest only 1 µm2. The separating lines are ranging from 10 µm to 2 µm width. The magnetic characterization of the samples have been done by VSM and MOKE. All samples exhibit well defined exchange bias field. A series of MFM images were taken from the structures. All images show a monodomain magnetization state in zero magnetic field. The shape
of the structure itself dose not influence stray field direction. The shape anisotropy contribution is thus smaller than the unidirectional anisotropy
given by the exchange bias. MFM investigation in an applied magnetic field have been done to get a deeper understanding of the domain pattern.
Keywords: magnetism; magnetic patterning; exchange bias; MFM
-
Poster
DPG-Frühjahrstagung 2005, Berlin, 4.-9.3.2005
Permalink: https://www.hzdr.de/publications/Publ-6825
Ionenstrahlinduzierte StrukturÄanderungen in FePt Nanopartikeln
Rellinghaus, B.; Dmitrieva, O.; Liedke, M. O.; Schultz, L.; Fassbender, J.
Abstract
Monodisperse, vielfach verzwillingte FePt Nanopartikel mit ikosaedrischer Struktur und Konzentrationen im Bereich der stÄochiometrischen Zusammensetzung wurden durch DC-Sputtern in der Gasphase hergestellt. Die ikosaedrische Struktur der Partikel hat sich dabei als Äau¼erst stabil erwiesen, und weder thermisches Anlassen im Fluge noch nach der Deposition fÄuhrt zur Einstellung der magnetisch hochanisotropen, chemisch geordneten tetragonalen L10-Gleichgewichtsstruktur [1]. Eine Bestrahlung dieser Teilchen durch 5 keV He-Ionen bei Fluenzen von f > 10^17 Ionen/cm2 hingegen fÄuhrt zur Umwandlung in die kfz Struktur. Obwohl die Ionenbestrahlung die Versinterung benachbart liegender Partikel initiiert und somit eine erhÄohte Di®usion aufgrund einer temporär erhöhten Defektkonzentration belegt, wird die Einstellung der L10-Phase nicht beobachtet. Die Ergebnisse werden durch kinetisch bedingte Modifikationen der thermodynamischen Gleichgewichtsphasen erklärt.
[1] S. Stappert, B. Rellinghaus, M. Acet, and E.F. Wassermann, Proc. Mat. Res. Soc. Vol. 704, 73 (2002); S. Stappert, B. Rellinghaus, M. Acet, and E.F. Wassermann, J. Cryst. Growth 252, 440 (2003).
Gefördert durch die DFG im Rahmen des SFB 445.
Keywords: magnetism; magnetic particles; clusters; FePt; L10-phase; hard magnetic; ion irradiation; phase transformation
-
Lecture (Conference)
DPG-Frühjahrstagung 2005, 4.-9.3.2005, Berlin, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-6824
All-optical probe of magnetization dynamics in exchange bias systems
Weber, M.; Nembach, H.; Schultheiss, H.; Bayer, C.; Blomeier, S.; Kaltofen, R.; Schumann, J.; Carey, M.; Hillebrands, B.; Fassbender, J.
Abstract
The picosecond optical control of the exchange bias anisotropy was investigated in real time for different exchange bias bilayers (NiFe/FeMn, CoFe/NiMn, CoFe/IrMn) using time-resolved magneto-optics. Upon photoexcitation the spin temperature is increased leading to a collapse of the interfacial exchange coupling. Both the shift fields and the easy axis coercivities are reduced within the first 10 ps. The unpinning is followed by a slower spin-lattice relaxation process. The deduced relaxation times turn out to be quite comparable (< 205 ps) for all bilayers. The thermal decoupling of the bilayers can lead to a high frequency precession of the magnetization of the ferromagnetic layers. The precessional response of the CoFe/IrMn system reveals a Kittel type field dependence of the precession frequency. Brillouin light scattering measurements of the field dependence of the FMR frequency are in good agreement with the real time measurements, further supporting the homogeneous mode character of the optically excited precession.
Keywords: magnetism; magnetization dynamics; pump-probe techniques; time-resolved; damping; exchange-bias
-
Poster
DPG-Frühjahrstagung 2005, Berlin, 4.-9.3.2005
Permalink: https://www.hzdr.de/publications/Publ-6823
Small and large angle precession in exchange biased bilayers
Weber, M.; Nembach, H.; Hillebrands, B.; Fassbender, J.
Abstract
Small and large angle excitations in exchange bias systems have beeninvestigated in real time by means of all-optical pump-probe experiments. Due to an increased spin temperature upon photoexcitation, an unpinning of the interfacial exchange coupling takes place resulting in a collapse of the unidirectional anisotropy. In terms of an internal pulse field the excess energy of the spin system leads to the excitation of a high frequency precessional response. The magnitude of the internal pulse field can be controlled by the absorbed photons [1]. Hence, the precessional motion depending on the precession angle can be investigated. The extracted Gilbert parameter does not depend on the magnitude of the internal pulse field. Both small and large angle precession can be modeled within the Landau-Lifshitz-Gilbert framework. Employing the antiferromagnetic thickness dependence of the exchange bias field, the exchange bias field dependence of the Gilbert parameter was investigated. The dissipation
rate increases linearly with the exchange bias field magnitude which can be understood taking local fluctuations of the interfacial exchange coupling as an additional dissipation mechanism into account [2].
[1] M. C. Weber et al., Phys. Rev. B, submitted. [2] M.C. Weber et al., J. Appl. Phys., in press.
Keywords: magnetism; magnetization dynamics; pump-probe techniques; time-resolved damping
-
Lecture (Conference)
DPG-Frühjahrstagung 2005, 4.-9.3.2005, Berlin, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-6822
Boundary-integral method for calculating poloidal axisymmetric AC magnetic fields
Priede, J.; Gerbeth, G.
Abstract
This paper presents a novel boundary-integral equation (BIE) method for the calculation of poloidal axisymmetric magnetic fields applicable in a wide range of AC frequencies. The method is based on the vector potential formulation and it uses the Green's functions of Laplace and Helmholtz equations for the exterior and interior of conductors, respectively. In such a way, a coupled system of two complex surface-boundary equations is obtained that reduces the problem of finding the field distribution in the whole space to the determination of the vector potential and its normal derivative on the surface only. This reduction comes at the price of an increased complexity of the Green's function for the axisymmetric Helmholtz equation whose calculation is discussed in detail. The method is verified by comparing with the analytical solution for a sphere in a uniform external AC field. Application of the method is demonstrated for a simple model inductor.
- IEEE Transactions on Magnetics 42(2006)2,Part 2, 301-308
Permalink: https://www.hzdr.de/publications/Publ-6821
Post mortem investigations of Greifswald VVER 440 reactor pressure vessel: Recent progress in dosimetry and material investigations
Konheiser, J.; Rindelhardt, U.; Viehrig, H.-W.
Abstract
Pressure vessel integrity assessment after long-term service irradiation is commonly based on surveillance program results. Radiation loading, metallurgical and environmental histories, however, can differ between surveillance and RPV materials. Therefore, the investigation of RPV material from decommissioned NPPs offers the unique opportunity to evaluate the real toughness response. A chance is given now through the investigation of material from the decommissioned Greifswald NPP (VVER-440/230) to evaluate the state of a standard RPV design and to assess the quality of prediction rules and assessment tools.
Some years ago first fluence calculations were done for the four Greifswald units in the frame of a TACIS project [1]. Neutron fluence integrals E>0.5MeV, E>1MeV and dpa-values at the inner and outer pressure vessel walls were obtained with the help of a Greens functions method. New improved results will be presented based on new calculations of pin-wise time dependent neutron sources and an updated nuclear data base. The Monte Carlo calculations of neutron and gamma fluence spectra for different time intervals were done at all positions throughout the RPV wall, where the material specimens will be taken. The statistical error was estimated to be smaller than 1%. A comparison between the calculated fluences and experimental values (12th cycle of unit 1) shows a good agreement, the differences were smaller than 5 %.
The fluence at the inner wall of the RPV for E > 0.5 MeV for the critical weld was 4.64* 10^18 n/cm2. The maximum fluence at the RPV is larger by a factor 1.5. In addition, it could be shown that the fluence at the designated reference positions can be neglected (3 orders of magnitude smaller).
Because of changes in the dismantling procedure a new technology was developed to extract trepans from the interesting RPV positions. A special drilling machine is under development, which will be positioned at the ring water tank near the main coolant loops. The RPV will be moved by crane in the wanted positions (height and azimuth). The remotely controlled trepanning will start in 2005 at unit 1.
The testing and investigation program is focussed on the characterization of the material state as received. It comprises chemical analysis, microstructure investigations (by means of metallography, electron microscopy and SANS), and mechanical testing (hardness measurements, tensile, Charpy-V and fracture mechanics testing). The key part of the testing will be focussed on the determination of the reference temperature T0 following the ASTM test standard E1921-03. Trepans from 4 height positions (welds 3 and 4, base material from the maximum load position and from reference position) will be investigated..
[1] TACIS-Project NUCRUS 96601, Final Report, Brussels 2000
Keywords: reactor pressure vessel; neutron dosimetry; neutron embrittlement; VVER-440
-
Lecture (Conference)
4th International Conference on: Safety assurance of nuclear power plants with WWER, 23.-25.05.2005, Podolsk, Russia -
Contribution to proceedings
4th International Conference on Safety Assurance of Nuclear Power Plants with WWER, 23.-25.05.2005, Podolsk, Russia
CD-ROM, Podolsk
Permalink: https://www.hzdr.de/publications/Publ-6820
Experimental investigation on bubble turbulent diffusion in a vertical large-diameter pipe by wire-mesh sensors and correlation techniques
Manera, A.; Lucas, D.; Prasser, H.-M.
Abstract
Experiments with air-water flows have been carried out in a vertical pipe of ~194-mm diameter and 9-m length, and a wide range of superficial liquid and gas velocities has been covered. At a distance of 7.6 m from the air injection, two wire-mesh sensors are installed, located at a distance of 63.3 mm from each other. The wire-mesh sensors measure sequences of instantaneous two-dimensional gas-fraction distributions in the cross section in which they are mounted, with a spatial resolution of 3 mm and a frequency of 2500 Hz. The spatial cross-correlations of the gas-fraction signals have been evaluated, and on their basis turbulent diffusion coefficients have been estimated.
It is found that for a given liquid superficial velocity, a sudden increase of the diffusion coefficient takes place when the superficial gas velocity is increased above a certain value. The abrupt increase of the diffusion coefficient occurs in correspondence of the transition from mono- to bimodal bubble size distributions.
The experimental diffusion coefficients are compared with the prediction of the Sato model (experimental gas-fraction profiles and bubble size distributions are given as input). Even though this model has been developed for bubbly flow, the general trends are well captured also in the churn-turbulent regime.
Keywords: Two-phase flow; eddy diffusivity; cross-correlation; bubble-induced turbulence
- Nuclear Technology 158 (2007) 275-290
Permalink: https://www.hzdr.de/publications/Publ-6819
Three-dimensional flow pattern visualization and bubble size distributions in stationary and transient upward flashing flow
Manera, A.; Prasser, H.-M.; Lucas, D.; van der Hagen, T. H. J. J.
Abstract
An experimental three-dimensional reconstruction and visualization of stationary and transient flashing flow in a vertical pipe (47 mm diameter) is presented. The measurements have been performed by means of wire-mesh sensors. This type of sensor delivers two-dimensional void fraction distributions in the pipe cross-section where it is mounted with a maximum sampling rate of 10,000 frames per second. A sampling rate of 1200 frames per second has been used in this work. Steam bubbles have been identified from the wire-mesh data and their complete three-dimensional reconstruction has been performed by taking into account the steam bubble velocity. For the estimation of the bubble velocity, two wire-mesh sensors positioned at a small axial distance from each other have been used. The velocity has been determined by cross-correlation of the two wire-mesh signals, by direct identification of the traveling time of the steam bubbles between the two sensors and by means of a drift-flux model. A comparison between the three methods of bubbles velocity measurement is reported. Stationary and time-dependent bubble size distributions have been derived. The stationary radial void-fraction profiles have been decomposed according to bubble size classes and compared with the results obtained with an equilibrium model.
Keywords: Flashing; two-phase flow; three-dimensional visualization; bubble size
- International Journal of Multiphase Flow 32(2006), 996-1016
Permalink: https://www.hzdr.de/publications/Publ-6818
Bubble size distributions and three dimensional flow pattern visualization in stationary and transient upward flashing flow
Manera, A.; Prasser, H.-M.; Lucas, D.; van der Hagen, T. H. J. J.
Abstract
An experimental three-dimensional reconstruction and visualization of stationary and transient flashing flow in a vertical pipe (47 mm diameter) is presented. The measurements have been performed by means of wire-mesh sensors. This type of sensor delivers two-dimensional void fraction distributions in the pipe cross-section where it is mounted with a maximum sampling rate of 10,000 frames per second. A sampling rate of 1200 frames per second has been used in this work. Steam bubbles have been identified from the wire-mesh data and their complete three-dimensional reconstruction has been performed by taking into account the steam bubble velocity. For the estimation of the bubble velocity, two wire-mesh sensors positioned at a small axial distance from each other have been used. The velocity has been determined by cross-correlation of the two wire-mesh signals and by direct identification of the travelling time of the steam bubbles between the two sensors. A comparison between the two methods of bubbles velocity measurement is reported. Stationary and time-dependent bubble size distributions have been derived. The stationary radial void-fraction profiles have been decomposed according to bubble size classes and compared with the results obtained with an equilibrium model.
-
Contribution to proceedings
3rd International Symposium on Two-phase Flow Modelling and Experimentation, 22.-24.09.2004, Pisa, Italy, Proceedings on CD-ROM, paper CVG10.
Permalink: https://www.hzdr.de/publications/Publ-6817
Modeling of flashing-induced instabilities in the start-up phase of natural-circulation BWRs using the code FLOCAL
Manera, A.; Rohde, U.; Prasser, H.-M.; van der Hagen, T. H. J. J.
Abstract
This paper reports on the modeling and simulation of flashing-induced instabilities in natural circulation systems, with special emphasis on natural circulation Boiling Water Reactors (BWRs). For the modeling the 4-equation two-phase model FLOCAL (Rohde, 1986), developed at the Forschungszentrum Rossendorf (FZR, Germany), has been used. The model allows for the liquid and vapor to be in thermal non-equilibrium and, via drift-flux models, to have different velocities.
The phenomenology of the instability has been studied and the dominating physical effects have been determined. The results of the simulations have been compared qualitatively and quantitatively with experiments (Manera and van der Hagen, 2002) that have been carried out within the framework of a European project (NACUSP) on the CIRCUS facility. The facility, built at the Delft University of Technology in The Netherlands, is a water/steam 1:1 height-scaled loop of a typical natural-circulation-cooled BWR.
Keywords: Flashing; instabilities; experimental; numerical
- Nuclear Engineering and Design 235(2005)14, 1517-1535
Permalink: https://www.hzdr.de/publications/Publ-6816
Evidence for a structurally-driven insulator-to-metal transition in VO2: A view from the ultrafast timescale
Cavalleri, A.; Dekorsy, T.; Chon, H. H. W.; Kiefer, J. C.; Schoenlein, R. W.
Abstract
We apply ultrafast spectroscopy to establish a time-domain hierarchy between structural and electronic effects in a strongly correlated electron system. We discuss the case of the model system VO2, a prototypical nonmagnetic compound that exhibits cell doubling, charge localization, and a metal-insulator transition below 340 K. We initiate the formation of the metallic phase by prompt hole photo-doping into the valence band of the low-T insulator. The insulator-to-metal transition is, however, delayed with respect to hole injection, exhibiting a bottleneck time scale, associated with the phonon connecting the two crystallographic phases. This structural bottleneck is observed despite faster depletion of the d bands and is indicative of important bandlike character for this controversial insulator.
Keywords: femtosecond; ultrafast; phase transition; Mott-insulator transition; vanadiumdioxide; coherent phonons; bottleneck
-
Physical Review B 70(2004), 161102(R)
DOI: 10.1103/PhysRevB.70.161102
Cited 628 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6814
Well-width dependence of coupled Bloch-phonon oscillations in biased InGaAs/InAlAs superlattices
Först, M.; Kurz, H.; Dekorsy, T.; Leavitt, R.
Abstract
The coupling between Bloch oscillations and longitudinal optical (LO) phonons is investigated in ternary In0.53Ga0.47As / In0.52Al0.48As superlattices of different well widths. In femtosecond time-resolved studies, a strong increase of the coherent LO phonon amplitudes is observed when the Bloch oscillations are subsequently tuned into resonance with the different optical phonon modes of the ternary semiconductor materials. In a narrow-well superlattice where electronic minibands are energetically shifted close to the confining barrier potential, the phonon amplitudes are asymmetrically enhanced on the high-frequen cy edge
of the resonance. Here, at high electric fields, field induced tunneling into above-barrier continuum states leads to a rapid dephasing of Bloch oscillations. The associated polarization change provides an additional excitation process for coherent LO phonons.
Keywords: Bloch oscillations; quantum coherence; ultrafast; femtosecond; superlattice; coherent phonons; minibands; field dynamics; optoelectronic
-
Physica Status Solidi D 1(2004), 2702-2705
DOI: 10.1002/pssc.200405315
Cited 2 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6813
Grazing-Incidence Diffraction Strain Analysis of a Laterally patterned Si wafer treated by Focused Ge and Au Ion Beam Implantation
Grenzer, J.; Bischoff, L.; Pietsch, U.
Abstract
Strain analysis of a laterally patterned Si-wafer was carried out utilizing X-ray grazing-incidence diffraction performed at the ID10B at the ESRF. The lateral patterning was done by focused ion beam implantation using a AuGeSi alloy liquid metal ion source. Samples were prepared by either a 35 keV Au+ ion beam (dose: 0.3, 2 ·10E14cm−2) or by a 70 keV Ge++ ion beam (dose: 8 · 10E14cm−2). It was shown that a periodical defect structure consisting of both implanted and not implanted stripes is created due to ion beam implantation. The induced strain distribution induced, however, shows no periodicity. This can be only explained by an overlap of the strain fields created in each implanted stripe. We found a maximum strain for the Au implanted samples in a depth of about 20 nm (da/a = −1,−3 · 10E−4 for the Au samples); for the Ge sample in a depth of 100nm (da/a = −1.2 · 10E−4). At depths 500nm below the sample surface the strain of the Ge sample becomes smaller than the detection limit (da/a < 2 · 10E−5). Using this technique we were able to create a buried Ge layer with a thickness of about 200 nm and an averaged Ge content of about 1%.
Keywords: Ion beam implantation; Grazing incidence diffraction
-
Lecture (Conference)
DPG Frühjahrstagung 2005, 04.03. bis 09.03.2005, Berlin, Deutschland -
Physica Status Solidi (A) 202(2005)6, 1009-1016
DOI: 10.1002/pssa.200420005
Cited 2 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6812
Actinide, lanthanide, fission product speciation and electrochemistry
Bhatt, A.; Kinoshita, H.; Koster, A. L.; May, I.; Sharrad, C. A.; Volkovich, V. A.; Vox, O. D.; Jones, C. J.; Lewin, B. G.; Charnock, J. M.; Hennig, C.
Abstract
There is currently a great deal of research interest in the development of molten salt technology, both classical high temperature melts and low temperature ionic liquids, for the electrochemical separation of the actinides from spent nuclear fuel. We are interested in gaining a better understanding of actinide and key fission product speciation and electrochemical properties in a range of melts. Our studies in high temperature alkali metal melts (including LiCl and LiCl-KCl and CsCl-NaCl eutectics) have focussed on in-situ species of U, Th, Tc & Ru using X-ray absorption spectroscopy (XAS, both EXAFS and XANES) electronic absorption spectroscopy (EAS) and Raman spectroscopy. We report unusual actinide speciation in high temperature melts and an evaluation of the likelihood of Ru or Tc volatilisation during plant operation. Our studies in lower temperature melts (ionic liquids) have focussed on salts containing tertiary alkyl group 15 cations and the bis(trifluormethyl)sulfonyl)limide anion, melts which we have shown to have exceptionally wide electrochemical windows. We report Ln, Th, U, Np and Pu speciation (XAS, EAS and vibrational spectroscopy) and electrochemistry in these melts and relate the solution studies to crystallographic characterised benchmark species.
-
Invited lecture (Conferences)
227th ACS National Meeting, 31.03.2004, Anaheim, CA, United States
Permalink: https://www.hzdr.de/publications/Publ-6811
Speciation of U4+ in high concentrated [Cl-] solutions with a spectro-electrochemical cell
Hennig, C.
Abstract
The coordination of the U(IV) and U(VI) ions as a function of the chloride concentration in aqueous solution has been studied by U LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The oxidation state of uranium was changed in situ using a gas-tight spectro-electrochemical cell, specifically designed for the safe use with radioactive solutions. For U(IV) the complexes U(H2O)8Cl3+, U(H2O)6-7Cl2
2+ and U(H2O)5Cl+.
-
Invited lecture (Conferences)
ACTINET Coordination Meeting "Electrochemistry of Ionic Liquids" 8.11.2004, Strasbourg, France
Permalink: https://www.hzdr.de/publications/Publ-6810
Comparative EXAFS investigation of Uranium(VI) and -(IV) aquo chloro complexes in solution using a newly developed spectroelectrochemical cell
Hennig, C.; Tutschku, J.; Rossberg, A.; Bernhard, G.; Scheinost, A.
Abstract
The coordination of the U(IV) and U(VI) ions as a function of the chloride concentration in aqueous solution has been studied by U LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The oxidation state of uranium was changed in situ using a gas-tight spectro-electrochemical cell, specifically designed for the safe use with radioactive solutions. For U(VI) we observed the complexes UO2(H2O)4Cl+, UO2(H2O)3Cl20 and UO2(H2O)2Cl3 with [Cl] increasing from 3 to 9 M, and for U(IV) the complexes U(H2O)8Cl3+, U(H2O)6-7Cl22+ and U(H2O)5Cl3+. In the uranium coordination sphere U-O distances are 2.41-0.02 Å and U-Cl distances are 2.71-0.02 Å, independent of oxidation state and chloride concentration.
- Inorganic Chemistry 44(2005), 6655-6661
Permalink: https://www.hzdr.de/publications/Publ-6809
Beitrag zur Modellierung der Schmelzerückhaltung im RDB nach Verlagerung von Corium in das untere Plenum: Berechnung des Temperaturfeldes und der viskoplastischen Verformung der Behälterwand
Altstadt, E.; Willschütz, H.-G.
Abstract
Bezüglich eines hypothetischen Kernschmelzeszenarios in einem Leichtwasserreak-tor (LWR) ist es notwendig, mögliche Versagensformen des Reaktordruckbehälters sowie Versagenszeiträume zu untersuchen, um die Belastung für das Containment bestimmen zu können. Es wurden bereits eine Reihe von Experimenten durchge-führt, welche Erkenntnisse hierüber liefern sollen.
Vom Institut für Sicherheitsforschung des FZR wurde ein Finite-Elemente-Modell er-stellt, das sowohl die Temperaturfeldberechnung für die Wand als auch die elasto-plastische Mechanik der Behälterwand beschreibt. Dabei wurde ein fortgeschrittenes Modell für das Kriechen und für die Materialschädigung entwickelt und an Hand von experimentellen Daten validiert. Die thermischen und mechanischen Berechnungen sind rekursiv und sequentiell gekoppelt. Das Modell ist in der Lage, Versagenszeit und Versagensposition eines Behälters mit beheiztem Schmelzepool zu berechnen.
Das Modell wurde für Voraus- und Nachrechnungen der FOREVER-Experimente, die den RDB eines LWR im Maßstab 1:10 nachbilden, angewendet. Diese Experimente wurden an der KTH Stockholm durchgeführt. Die Ergebnisse der Berechnungen sind qualitativ und quantitativ sehr zufriedenstellend.
Erste Rechnungen für eine LWR-Geometrie wurden durchgeführt, um Unterschiede und Gemeinsamkeiten zwischen prototypischen Szenarien und skalierten Experi-menten herauszuarbeiten.
Keywords: Schmelzerückhaltung; Finite-Elemente-Modell; Kriechen; Schädigung; Schmelzepool; Leichtwasserreaktor
-
Wissenschaftlich-Technische Berichte / Helmholtz-Zentrum Dresden-Rossendorf; FZR-412 2005
ISSN: 1437-322X
Downloads
Permalink: https://www.hzdr.de/publications/Publ-6808
Suppression of Random Coincidences during In-Beam PET Measurements at Ion Beam Radiotherapy Facilities
Crespo, P.; Barthel, T.; Frais-Koelbl, H.; Griesmayer, E.; Heidel, K.; Parodi, K.; Pawelke, J.; Enghardt, W.
Abstract
In-beam positron emission tomography (PET) is currently the only method for an in-situ monitoring of charged hadron therapy.
However, in-beam PET data, measured at beams with a sub-microsecond-microstructure due to the accelerator radiofrequency (RF), are highly corrupted by random coincidences arising from prompt gamma-rays following nuclear reactions as the projectiles penetrate the tissue. Since random-correction techniques from conventional PET cannot be applied, the clinical in-beam PET at the therapy facility at the Gesellschaft fuer Schwerionenforschung (GSI) Darmstadt merely reconstructs events registered in the
pauses (~ 2 - 4 s) between the beam macropulses (< 2 s). We have successfully tested at GSI two methods for suppressing
the micropulse-induced random coincidences during beam extraction. Image statistics increased by about 90 %. Both methods rely on the synchronization of the gamma-gamma-coincidences measured by the positron camera with the time microstructure of the beam, either by using the RF-signal from the accelerator or the signal of a thin diamond detector placed in the beam path in front of the target. Energy and triple-coincidence time correlated spectra first-measured during beam extraction, combined with the corresponding tomographic images of the beta+ activity induced by the beam in a plastic phantom, clearly confirm the feasibility of the proposed random suppression methods. These methods provide the solution for applying in-beam PET at synchrotron and cyclotron radiotherapy facilities with optimal utilization of the annihilation photon flux.
Keywords: PET; charged hadron therapy; LSO; APD
- IEEE Transactions on Nuclear Science, 52(2005)4, 980-987
Downloads
Permalink: https://www.hzdr.de/publications/Publ-6806
Electron Beam Diagnostic at the ELBE Free Electron Laser
Evtushenko, P.
-
Wissenschaftlich-Technische Berichte / Forschungszentrum Rossendorf; FZR-413 2004
ISSN: 1437-322X
Downloads
Permalink: https://www.hzdr.de/publications/Publ-6805
High brightness electron guns for next-generation light sources and accelerators
Bluem, H. P.; Todd, A. M. M.; Cole, M. D.; Rathke, J.; Schultheiss, T.; Lewellen, J.; Phillips, L.; Preble, J.; Ben-Zvi, I.; Srinivasan-Rao, T.; Neil, G. R.; Colestock, P.; Nguyen, D. C.; Wood, R. L.; Young, L.; Janssen, D.
Abstract
Next-generation light sources and accelerators are being proposed that set unique requirements for the electron source parameters. No single source is suitable for the diverse applications, which have operating characteristics ranging from high-average-current, quasi-CW, to high-peak-current, single-pulse electron beams. Advanced Energy Systems, in collaboration with our various partners, is developing a variety of electron gun concepts for these important applications.
Involved research facilities
- SRF Gun
-
Contribution to proceedings
9th European Particle Accelerator Conference EPAC 2004, 05.-09.07.2004, Lucerne, Switzerland
Contributions to the Proceedings, 9th European Particle Accelerator Conference EPAC 2004, 92-9083-232-0, 899-901 -
Contribution to WWW
EPAC 2004 Contributions to the Proceedings, 9th European Particle Accelerator Conference EPAC 2004, 899-901, MOPLT156, 05.07. 09.07.2004, Lucerne, Switzerland ISBN 92-9083-231-2 (Web version), ISBN 92-9083-232-0 (CD-ROM): http://epaper.kek.jp/e04/PAPERS/MOPLT156.PDF
Permalink: https://www.hzdr.de/publications/Publ-6804
The influence of the main coupler field on the traverse emittance of a superconducting RF gun
Janssen, D.; Dohlus, M.
Abstract
The field disturbance in the RF coupler plane increases the transverse emittance of RF electron guns. This effect has been calculated for the Rossendorf superconducting RF gun. For 10 kW beam power the increasing is smaller than 5 %.
Involved research facilities
- SRF Gun
-
Contribution to proceedings
9th European Particle Accelerator Conference EPAC 2004, 05.-09.07.2004, Lucerne, Switzerland
EPAC 2004 Contributions to the Proceedings, 9th European Particle Accelerator Conference EPAC 2004, 92-9083-232-0, 327-329 -
Contribution to WWW
EPAC 2004 Contributions to the Proceedings, 9th European Particle Accelerator Conference EPAC 2004, 327-329, MOPKF013, 05.07. 09.07.2004, Lucerne, Switzerland, ISBN 92-9083-231-2 (Web version): http://epaper.kek.jp/e04/PAPERS/MOPKF013.PDF -
Poster
9th European Particle Accelerator Conference EPAC 2004, 05.-09.07.2004, Lucerne, Switzerland
Permalink: https://www.hzdr.de/publications/Publ-6802
Tc and Re labelling of biomolecules according to the "4+1" mixed-ligand approach: Switching from Diagnostic to Therapeutic Radiopharmaceuticals
Pietzsch, H.-J.; Schiller, E.; Seifert, S.; Künstler, J.-U.; Spies, H.
-
Invited lecture (Conferences)
2nd Research Co-ordination Meeting of the International Atomic Energy Agency's Co-ordinated Research Project on "Development of 99mTc based Small Bio Molecules Using Novel 99mTc Cores", 5.-13.02.2004, Wien, Austria
Permalink: https://www.hzdr.de/publications/Publ-6801
Spectator detection for the measurement of proton-neutron interactions at ANKE
Lehmann, I.; Barsov, S.; Schleichert, R.; Wilkin, C.; Drochner, M.; Hartmann, M.; Hejny, V.; Merzliakov, S.; Mikirtychiante, S.; Mussgiller, M.; Protic, D.; Stroher, H.; Trusov, S.; Wustner, P.
Abstract
A telescope of three silicon detectors has been installed close to the internal target position of the ANKE spectrometer, which is situated inside the ultra-high vacuum of the COSYJulich light-ion storage ring. The detection and identification of slow protons and deuterons emerging from a deuterium cluster-jet target thus becomes feasible. A good measurement of the energy and angle of such a spectator proton (p(sp)) allows one to identify a reaction as having taken place on the neutron in the target and then to determine the kinematical variables of the ion-neutron system on an event-by-event basis over a range of c.m. energies.The system has been successfully tested under laboratory conditions. By measuring the spectator proton in the pd-->p(sp)dpi(0) reaction in coincidence with a fast deuteron in the ANKE Forward Detector, values of the pn-->dpi(0) total cross-section have been deduced. Further applications of the telescope include the determination of the luminosity and ! beam polarisation which are required for several experiments.
- Nuclear Instruments and Methods in Physics Research A 530(2004)3, 275-285
Permalink: https://www.hzdr.de/publications/Publ-6798
ρ-ω splitting and mixing in nuclear matter
Zschocke, S.; Kämpfer, B.
Abstract
We investigate the splitting and mixing of ρ and ω mesons in nuclear matter. The calculations were performed on the basis of QCD sum rules and include all operators up to mass dimension-6 twist-4 and up to first order in the coupling constants. Special attention is devoted to the impact of the scalar four-quark condensates on both effects. In nuclear matter the Landau damping governs the ρ-ω mass splitting while the scalar four-quark condensates govern the strength of individual mass shifts. A strong in-medium mass splitting causes the disappearance of the ρ-ω mixing.
- Physical Review C 70(2004), 035207
Permalink: https://www.hzdr.de/publications/Publ-6797
Quadrupole moments and g factors for high-spin neutron isomers in Pb-193
Ionescu-Bujor, M.; Iordachescu, A.; Balabanski, D. L.; Chmel, S.; Neyens, G.; Baldsiefen, G.; Bazzacco, D.; Brandolini, F.; Bucurescu, D.; Danchev, M.; de Poli, M.; Georgiev, G.; Grogen, A.; Haas, H.; Hubel, H.; Ilie, G.; Marginean, N.; Menegazzo, R.; Pavan, P.; Rainovski, G.; Ribas, R. V.; Alvarez, C. R.; Ur, C. A.; Vyvey, K.; Frauendorf, S.
Abstract
The g factors and quadrupole moments of the 21/2(-) and 33/2(+) isomers in Pb-193 have been measured by the time-differential perturbed gamma-ray angular distribution method as g(21/2(-))=-0.059(11), \Q(21/2(-))\=0.22(2) eb and g(33/2(+))=-0.171(9), parallel toQ(33/2(+))\=0.45(4) eb. The results support the three-neutron configurations (1i(13/2))(12)(+2)x3p(3/2) and (1i(13/2))(3) for the 21/2(-) and 33/2(+) states, respectively. The quadrupole moment of the 12(+) isomer in Pb-194 described by the two-neutron (1i(13/2))(2) configuration has been remeasured as \Q(12(+))\=0.48(3) eb in perfect agreement with the previous data. The experimental results are discussed within a microscopic Bardeen-Cooper-Schrieffer approach in a number-projected one- and three-quasiparticle neutron space, and in the frame of the pairing plus quadrupole tilted-axis cranking model.
- Physical Review C 7003(2004), 4305
Permalink: https://www.hzdr.de/publications/Publ-6796
Simulationsrechnungen zur Validierung des Monte Carlo Codes FLUKA für de Vorhersage der bei Tumorbestrahlungen mit Ionen erzeugten β+-Aktivität
Sommerer, F.; Enghardt, W.; Parodi, K.; Poljanc, K.; Aiginger, H.
Abstract
Contribution to 54. Jahrestagung der Österreichischen Physikalischen Gesellschaft
-
Contribution to proceedings
Contribution to 54. Jahrestagung der Österreichischen Physikalischen Gesellschaft, Linz, Austria, 28-30
Permalink: https://www.hzdr.de/publications/Publ-6795
Positronenemissionstomographie in der Therapie mit Kohlenstoffionen und Validierung des FLUKA Monte Carlo Codes für die Vorhersage der bei Tumorbestrahlungen mit Ionen erzeugten β+-Aktivität
Poljanc, K.; Sommerer, F.; Parodi, K.; Aiginger, H.; Enghardt, W.
-
Contribution to proceedings
ÖGMP Annual Meeting, Wiener Neustadt, 04.-05.06.2004, Wiener Neustadt, Austria
Abstract of the ÖGMP Annual Meeting
Permalink: https://www.hzdr.de/publications/Publ-6794
The FLUKA code: new developments and application to 1 GeV/n Iron beams
Aiginger, H.; Andersen, V.; Ballarini, F.; Battistoni, G.; Campanella, M.; Carboni, M.; Cerutti, F.; Empl, A.; Enghardt, W.; Fassò, A.; Ferrari, A. C.; Gadioli, E.; Garzelli, M. V.; Lee, K. S.; Ottolenghi, A.; Parodi, K.; Pelliccioni, M.; Pinsky, L.; Ranft, J.; Roesler, S.; Sala, P. R.; Sacannicchio, D.; Smirnov, G.; Sommerer, F.; Wilson, T.; Zapp, N.
Abstract
The modelling of ion transport and interactions in matter is a subject of growing interest, driven by the multiplication of applicaton fields. These include hadron therapy, dosimetry, and space missions, but there are also several fundamental research, accelerator physics, and cosmic ray physics issues where a reliable description of heavy ion induced cascades is important. In the present work, the capabilities of the FLUKA code for ion beams will be briefly recalled and some recent developments presented. Applications of the code to the simulation of therapeutic carbon, nitrogen and oxygen ion beams, and of iron beams, which are of direct interest for space mission related experiments, will be also presented, together with interesting consideration about the evaluation of dosimetric quantities. Both applications involve ion beams in the AGeV range.
- Advances in Space Research 35(2005)2, 214-222
Permalink: https://www.hzdr.de/publications/Publ-6793
Investigation of acoustic waves generated in an elastic solid by a pulsed ion beam and their application in a FIB based scanning ion acoustic microscope
Akhmadaliev, C.
Abstract
The rapid growth of the microelectronics industry in the last decades made it possible to produce structures in the sub-micrometer scale on silicon chips and to reach an integration scale under 100 nm. Decreasing the size and increasing the complexity of these structures make a control of quality and defects investigation more difficult. During a long time ultrasound devices are being used for nondestructive investigation of materials, like ultrasound microscopes, scanning photo-acoustic microscopes or scanning electron-acoustic microscopes, where acoustic waves are generated by acoustic transducers, focused laser or electron beams, respectively.
The aim of this work is to investigate more precisely the acoustic wave generation by pulsed and periodically modulated ion beams in different solid materials depending on the beam parameters and to demonstrate the possibility to apply an intensity modulated focused ion beam (FIB) for acoustic emission and for nondestructive investigation of the internal structure of materials on a microscopic scale. The combination of a FIB and an ultrasound microscope in one device can provide the opportunity of nondestructive investigation, production and modification of micro- and nanostructures simultaneously. The FIB spot size in modern systems is comparable with that of a focused electron beam and the penetration depth of ions with energy of 20-60 keV is lower than 100 nm. This makes it possible to reach a sub-micrometer resolution of a scanning ion acoustic microscope. On the other hand side a FIB with energy of 20-60 keV is a good tool which can be used for the fabrication of nanostructures using ion milling, implantation or ion beam assisted deposition techniques.
The bulk ultrasound emission in a solid was investigated using a pulsed high energy ion beam focused on aluminum, copper, iron and silicon samples. Oxygen, silicon and gold ion beams were applied in charge states from 1+ to 4+ with the pulse duration of 0.5 - 4 µs and an energy of 1.5 - 10 MeV. Intensity of the detected acoustic waves shows a linear dependence on the energy of the incident ions, on the ion flux as well as on the pulse duration. No influence of the ion charge and ion mass to the emission of acoustic waves was observed.
The ion acoustic effect was applied for a nondestructive material inspection using intensity modulated FIB providing by the IMSA-100 FIB system with an accelerating potential of 30-35 kV. The achieved lateral resolution of this scanning ion acoustic microscope is in the micrometer range depending on the sample material and the beam modulation frequency. The resolution can be improved by increasing the frequency. The maximal modulation frequency which was obtained at IMSA-100 is about 2 MHz corresponding to lateral resolution of 4-5 µm on silicon. Using this microscope, some images of integrated microstructures on a silicon chip were obtained using the lock-in technique for filtering of the signal from the noise and increasing of the total imaging time. The possibility to visualize near sub-surface structure was demonstrated. Due to the strong sputtering effect and the long time of irradiation the imaged structures were significantly damaged. Si2+, Ge2+, Ga+ and Au+ ions were used. All these ions are quite heavy and have high sputtering coefficients. Long-time imaging improves the quality of acoustic images, i. e. the signal-to-noise ratio is reduced with the square root from the pixel time, but leads to significant erosion of the imaged structure.
Keywords: acoustic microscopy; nondestructive investigation; scanning ion acoustic microscope; focused ion beam; ion acoustic effect in solids
-
Wissenschaftlich-Technische Berichte / Forschungszentrum Rossendorf; FZR-416 2004
ISSN: 1437-322X
Downloads
Permalink: https://www.hzdr.de/publications/Publ-6791
Gold and Palladium Nanoclusters Formed by Cells and S-Layer of Bacillus Spaericus JG-A12 Spectroscopic Studies
Merroun, M.
-
Lecture (others)
SMWK Projekttreffen an der Technischen Universität Dresden, 21.10.2004, Dresden, Germany
Permalink: https://www.hzdr.de/publications/Publ-6788
Abtrennung von Uran aus wässriger Lösung durch Calix[6]arene mittels Flüssig-Flüssig-Extraktion sowie Festphasen-Extraktion
Schmeide, K.; Geipel, G.; Bernhard, G.
Abstract
Die Uranspeziation in ausgewählten Sicker- und Grubenwässern des ehemaligen Uranbergbaus wurde mittels spektroskopischer Methoden (TRLFS, LIPAS) untersucht. Deren Kenntnis in Abhängigkeit vom pH-Wert ermöglicht die Optimierung der Uranabtrennung mittels uranophiler Calixarene. Mittels Flüssig-Flüssig-Extraktion wurde gezeigt, dass COOH-derivatisierte Calix[6]arene als effektive Extraktionsmittel für die selektive Uranylabtrennung aus umweltrelevanten Wässern bei pH-Werten größer 4 geeignet sind und für Praxisanwendungen eingesetzt werden können. Extraktionskonstanten wurden bestimmt. Die durch Fixierung dieser Calixarenderivate auf Polyester dargestellten calixarenmodifizierten Vliese sind in der Lage Uranylionen aus synthetischen Grubenwässern in Anwesenheit von Konkurrenzionen abzutrennen. Die Untersuchungen zur Reversibilität der Uranbindung an calixarenausgerüsteten Polyestervliesen haben gezeigt, dass eine fast vollständige Regenerierung der calixarenmodifizierten Vliese mittels verdünnter Mineralsäuren möglich ist. Die regenerierten textilen Filtermaterialien können für weitere Uranabtrennungszyklen eingesetzt werden. Nach Auswahl geeigneter Calixarenderivate ist eine Übertragung des entwickelten Abtrennungsprinzipes auf weitere Actinide (z. B. Np, Pu) bzw. Schwermetall-Kontaminanten (z. B. As, Cd, Pb) möglich.
Keywords: Uran; Calixarene; Extraktion; Textile Filter; Komplexierung; Sanierung; Abwasser
-
Wissenschaftlich-Technische Berichte, Forschungszentrum Rossendorf, FZR-414 2004
ISSN: 1437-322X
Downloads
Permalink: https://www.hzdr.de/publications/Publ-6786
Level scheme of Mo-94 at high angular momentum
Zhang, Y. H.; Liu, M. L.; de Angelis, G.; Podolyàk, Z.; Guo, W. T.; Gadea, A.; Ur, C.; Marginean, N.; Rusu, C.; Schwengner, R.; Napoli, D. R.; Menegazzo, R.; Lunardi, S.; Bazzacco, D.; Martinez, T.; Axiotis, M.; Gargano, A.; Lenzi, S.; Brandolini, F.; von Oertzen, W.
Abstract
High-spin level structure of Mo-94 has been re-investigated using the modem multidetector array of GASP via the O-16(Se-82, 4ngamma)Mo-94 reaction at E(Se-82) = 459 MeV. The previously reported level scheme has been largely modified up to similar to 10 MeV in excitation energy due to identifications of some important linking transitions. The level structure of Mo-94 has been compared with the shell model calculations. It is suggested that the valence neutron excitation within d(5/2), g(7/2), and h(11/2) orbitals should be taken into account in order to adequately describe the high-spin level structure of Mo-94 above I-pi = 14(+).
- High Energy Physics and Nuclear Physics - Chinese Edition 28(2004)9, 941-946
Permalink: https://www.hzdr.de/publications/Publ-6784
Experimental Study on the Feasibility of In-Beam PET for Accurate Monitoring of Proton Therapy
Parodi, K.; Pönisch, F.; Enghardt, W.
Abstract
Positron emission tomography is currently the only feasible method for in-situ and non-invasive 3D monitoring of the precision of the treatment in highly conformal ion therapy. Its positive clinical impact has been proven for fractionated carbon ion therapy of head and neck tumours at the experimental facility at the Gesellschaft f"ur Schwerionenforschung Darmstadt, Germany. Following previous promising experiments, the possible extension of the method to the monitoring of proton therapy has been investigated further in extensive in-beam measurements at GSI. Millimetre accuracy for verification of the lateral field position and for the most challenging issue of range monitoring has been demonstrated in mono-energetic and spread-out Bragg-peak proton irradiation of PMMA targets. The irradiation of an inhomogeneous phantom with tissue equivalent inserts in combination with further dynamic analysis has supported the extension of such millimetre precision to real clinical cases, at least in regions of interest for low perfused tissues. All the experimental investigations have been reproduced by the developed modeling rather well. This indicates the possible extraction of valuable clinical information as particle range in-vivo, irradiation field position and even local deviations from the dose prescription on the basis of the comparison between measured and predicted activity distributions. Hence, the clinical feasibility of in-beam PET for proton therapy monitoring is strongly supported.
- IEEE Transactions on Nuclear Science 52(2005)3, 778-786
Permalink: https://www.hzdr.de/publications/Publ-6783
The QCD equation of state near T_0 within a quasi-particle model
Bluhm, M.; Kampfer, B.; Soff, G.
Abstract
We present a description of the equation of state of strongly interacting matter within a quasi-particle model.
The model is adjusted to lattice QCD data near T0 at non-vanishing baryon density. We compare in detail the excess pressure and its expansion coefficients available from two-flavor lattice QCD calculations and outline prospects of the extrapolation to large baryon density.
Keywords: Equation of state; Strongly interacting matter; Lattice QCD
- Physics Letters B 620(2005),131-136
Permalink: https://www.hzdr.de/publications/Publ-6782
Berührungslose Messung von Phasen- und Konzentrationsverteilungen in Blasensäulen mit positronenemittierenden Radionukliden
Zippe, C.; Hoppe, D.; Fietz, J.; Hampel, U.; Hensel, F.; Mäding, P.; Prasser, H.-M.; Zippe, W.
Abstract
Die Positronen-Emissions-Tomographie (PET) ist eine etablierte Untersuchungsmethode in der Medizin. Das vorgestellte Projekt beschäftigt sich mit einer nichtmedizinischen Anwendung dieses bildgebenden Verfahrens dem Aufbau und der Anwendung eines PET-Tomographen zur Untersuchung des Verhaltens von Schaum in Blasensäulen. Am Beispiel von Natriumcapronat als schwaches Tensid, das einen feuchten, instabiler Schaum erzeugt, wird gezeigt, dass sich die Anreicherung eines Tensids in einer Schaumschicht mit der Positronen-Emissions-Tomographie nachweisen lässt.
Keywords: PET; Positronen-Emissions-Tomographie; Blasensäule; Schaum; Chemiereaktor; Tensid; Anreicherung
-
Poster
2. DECHEMA/GVC VDI-Symposium "Schäume - Grundlagen und Anwendungen", 16.-17.11.2004, Baden-Baden
Permalink: https://www.hzdr.de/publications/Publ-6781
High-fluence Si-implanted diamond: optimum implantation temperature for SiC formation
Weishart, H.; Eichhorn, F.; Heera, V.; Pécz, B.; Barna, Á.; Skorupa, W.
Abstract
In this paper we investigate the effect of implantation temperature on the structural properties of diamond implanted with high fluences of Si between 5.3 ´ 1017 Si cm-2 and 1 ´ 1018 Si cm-2. In order to reduce radiation-induced damage and to enhance SiC formation the implantations were performed at elevated temperatures in the range from 900 °C to 1200 °C. Subsequently, all samples were annealed for 10 minutes at 1500 °C in an rf-heated furnace. X-ray diffraction revealed the formation of cubic SiC nanocrystallites in a buried layer inside the implanted diamond. The implantation-induced damage was assessed by analyzing graphitization of the surface-near layer using Raman spectroscopy. With increasing Si fluence the implantation-induced damage rises and the nearly perfect alignment of the formed SiC crystallites within the host diamond lattice deteriorates. However, rising the implantation temperature from 900 °C to 1000 °C reduces the damage in the diamond and increases amount, size and epitaxial alignment of the crystalline SiC precipitates. Further increase of the implantation temperature gives no improvement in the quality of the SiC rich layer. Instead, the damaged diamond converts into graphite and the formation of SiC crystallites is obstructed.
Keywords: Ion implantation; thin films; Heterostructures; structure and nonelectronic properties; Ion radiation effects
- Journal of Applied Physics 98(2005), 043503.
Permalink: https://www.hzdr.de/publications/Publ-6780
Positronen Emissions Tomographie zur in vivo Charakterisierung neuer Substanzen
Bergmann, R.
-
Lecture (others)
Institutskolloquium, Max-Bergmann- Zentrum, 22.10.2004, Dresden, Germany
Permalink: https://www.hzdr.de/publications/Publ-6779
In vivo Biochemie mit PET
Bergmann, R.
-
Lecture (others)
Institutsseminar, Technische Universität Dresden, 26.10.2004, Dresden, Germany
Permalink: https://www.hzdr.de/publications/Publ-6778
Angular distribution and azimuthal asymmetry for pentaquark production in proton-proton collisions
Barz, H.-W.; Zetenyi, M.
Abstract
Angular distributions for production of the Theta+ pentaquark are calculated for the collisions of polarized protons with polarized target protons. We compare calculations based on different assumptions concerning spin and parity (J=1/2+/-,3/2+/-) of the Theta+ state.
For a wide class of interactions the spin correlation parameters describing the asymmetric angular distributions are calculated up to 250 MeV above production threshold. The deviations from the near threshold behavior are investigated.
- Physical Review C 71(2005), 065207
Permalink: https://www.hzdr.de/publications/Publ-6777
High-spin states and band terminations in 69As
Stefanescu, I.; Eberth, J.; Gersch, G.; Steinhardt, T.; Thelen, O.; Warr, N.; Weisshaar, D.; Carlsson, B. G.; Ragnarsson, I.; de Angelis, G.; Martinez, T.; Jungclaus, A.; Schwengner, R.; Lieb, K. P.; Stefanova, E.; Curien, D.
Abstract
Excited levels in 69As were studied using the 40Ca(32S, 3p)69 As reaction at 95 and 105 MeV beam energy. Gamma rays were detected with the EUROBALL spectrometer operated in conjunction with the Neutron Wall and the charged-particle detector array EUCLIDES. New level sequences with positive and negative paity were identified from 3p-γγ and γγγ coincidences. Spins were assigned to many of the levels on the basis of directional correlations of oriented states measurements. The previously observed positive-parity band was extended to spin 45/2+ and it was found to exhibit a crossing with another configuration identified up to spin 53/2+. Three negative-parity bands were observed for the first time up to spins (43/2-), 39/2-, and (41/2-). The previously known band was extended to spin (49/2-). No evidence for superdeformation was found, despite very high counting statistics. Configurations were assigned to each of the observed bands through comparisons to the cranked Nilsson-Strutunsky calculations.
-
Physical Review C 70(2004), 044304
DOI: 10.1103/PhysRevC.70.044304
Cited 14 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6775
Phase composition and properties of iron nanocrystals and clusters embedded in MgO matrix
Schneeweiss, O.; Pizurova, N.; Jiraskova, Y.; Zak, T.; Bezdicka, P.; Reuther, H.
Abstract
Phase composition of the Mg-Fe powder prepared by spark erosion is investigated using Mossbauer spectroscopy and X-ray diffraction. The results are compared with the phase analysis of MgO single crystal wafer implanted by Fe-57.
- Hyperfine Interactions 156(2004), 81-87
Permalink: https://www.hzdr.de/publications/Publ-6774
Mixed-Ligand Rhenium-188 Complexes with Tetradentate/Monodentate NS3/P (4+1) Coordination: Relation of structure with antioxidation stability
Schiller, E.; Seifert, S.; Tisato, F.; Refosco, F.; Bolzati, C.; Kraus, W.; Spies, H.; Pietzsch, H.-J.
Abstract
Development of new radiopharmaceuticals based on rhenium-188 depends on finding appropriate ligands able to give complexes with high in vivo stability. Rhenium(III) mixed-ligand complexes with tetradentate/monodentate (4 + 1) coordination of the general formula [Re(NS3)(PRRR)] (NS3 = tris-(2-mercaptoethyl)amine and derivatives thereof, PRRR = phosphorus(III) ligands) appear to be among the promising tools to achieve this goal. According to this approach, we synthesized and characterized series of rhenium model complexes. In vitro stabilities of the corresponding rhenium-188 complexes were determined by incubating 2-3 MBq or alternatively 37 MBq of the complexes in phosphate buffer, human plasma and rat plasma, respectively, at 22 °C or 37 °C, followed by checking the amount of 188ReO4
- formed after 1 h , 24 h and 48 h by thin-layer chromatography. The rate of perrhenate formation varied over a wide range, depending primarily on the nature of the phosphorus(III) ligand. Physicochemical parameters of the corresponding nonradioactive rhenium complexes were analyzed in detail to find out the factors influencing their different stability and furthermore to design new substitution-inert 4 + 1 complexes. Tolmans cone angle of phosphorus(III) ligands and the lipophilic character of the inner coordination sphere were found to be crucial factors to build up stable rhenium 4 + 1 complexes. Additional information useful to describe electronic and steric properties of these compounds were selected from electronic spectra (wavelength of the Re→S charge-transfer band), cyclovoltammetric measurements (E° of the ReIII/ReIV couple), and NMR investigations (31P chemical shift of coordinated P(III) ligands).
- Bioconjugate Chemistry 16(2005), 634-643
Permalink: https://www.hzdr.de/publications/Publ-6773
Design and performance of a high-resolution gamma tomography device
Bieberle, A.; Hampel, U.; Schleicher, E.; Hoppe, D.; Prasser, H.-M.; Sühnel, T.; Zippe, C.
Abstract
We introduce and discuss the design and performance of a new high-resolution gamma ray tomography device that has been built for the measurement and visualisation of quasi-stationary flow structures in hydrodynamic machines and of gas fraction distributions in thermohydraulic facilities. The gamma tomography system can be operated either with a Cs-137 or a Co-60 source, which allows measurements in radiologically dense enclosures, such as pressure vessels, chemical reactors, or hydrodynamic machines. The detector arc is made of 320 small scintillation detector elements comprising LYSO scintillation crystals with an active area of 2 mm x 8 mm and large area avalanche photodiodes coupled to the crystals. For the photodiode read-out we developed a special charge sensitive pre-amplifier electronics based on a monolithic IC amplifier. This preamplifier stage is followed by pulse shaping and energy discrimination electronics. Data is acquired by fully parallel pulse counting with energy discrimination. For tomographic image reconstruction we implemented a set of analytic and iterative image reconstruction algorithms including filtered backprojection, ART, MART, and SIRT. In the presentation we will especially discuss the performance of the system with regard to density resolution and spatial resolution.
Keywords: high-resolution gamma ray tomography device; measurement; scintillator; avalanche photodiode; visualisation of quasi-stationary flow structures; tomographic sensor design
-
Contribution to proceedings
4th World Congress on Industrial Process Tomography, 05.09.-08.09.2005, Aizu, Japan
Permalink: https://www.hzdr.de/publications/Publ-6772
Structural studies on ion implanted semiconductors using x-ray synchrotron radiation: strain evolution and growth of nanocrystals
Eichhorn, F.; Gaca, J.; Heera, V.; Schell, N.; Turos, A.; Weishart, H.; Wojcik, M.
Abstract
X-ray synchrotron radiation is a very powerful tool in structural analysis of solids. Due to its extremely high intensity and low angular divergence synchrotron radiation allows the study of structures that otherwise are impossible. Here the typical studies on different semiconductor materials using various methods of synchrotron x-ray scattering are presented.
Ion implantation in compound semiconductors is a quite complicated process leading to some usually detrimental effects like buildup of damage and strain. In the case of InP produced strain is rather low and is hardly accessible by the conventional x-ray analysis. InP single crystals implanted with different doses of 1.2 MeV As+ ions were studied. It was found that implanted layers are under tensile stress, which relaxes upon prolonged storage at RT.
Another important issue is the analysis of nanocrystals. Diamond-SiC heterostructures produced by ion beam synthesis are considered as a promising technique for production of novel devices for high power applications. Synthesized by ion bombardment nanocrystals that grow in the single crystalline matrix are highly oriented. As revealed by x-ray scattering size and shape of nanocrystals, as well as incorporated strain depend on the ion implantation parameters.
Keywords: ion bombardment; compound semiconductors; diamond; HRXRD; RBS; ion beam synthesis
- Proceedings of the Vth International Conference "Ion Implantation and Other Applications of Ions and Electrons" - ION2004, June 14 - 17, 2004, Kazimierz Dolny, Poland, Vacuum 78(2005), 303-309
Permalink: https://www.hzdr.de/publications/Publ-6771
Two-phase flow simulations in the FZ Rossendorf using CFX-5
Krepper, E.; Lucas, D.; Prasser, H.-M.; Shi, J.-M.; Rohde, U.
Abstract
To qualify CFD codes for gas-liquid two-phase flows, they have to be equipped with constitutive models standing for the interaction between the gaseous and the liquid phases. In case of bubbly flow this particularly concerns the forces acting on the bubbles as well as bubble coalescence and break-up. Besides the drag forces describing the momentum exchange in flow direction, the non drag forces acting perpendicular to the flow direction play an important role for the development of the flow structure. The presentation describes the two phase flow test facilities in the Forschungszentrum Rossendorf, the applied measurement technique and the modelling efforts simulating the momentum exchange between the phases by means of a two-fluid model. The simulation of a rectangular bubble column and a hot channel in a nuclear reactor fuel assembly are presented as application examples.
Keywords: two-phase flow measurements; two-phase flow CFD calculations; Euler/Euler two fluid approach; momentum exchange non drag forces; wall boiling
-
Contribution to proceedings
22nd CAD-FEM User's Meeting 2004 and ANSYS CFX & ICEM CFD Conference, 10.-12.11.2004, Dresden, Germany -
Lecture (Conference)
22nd CAD-FEM User's Meeting 2004 and ANSYS CFX & ICEM CFD Conference, 10.-12.11.2004, Dresden, Germany
Permalink: https://www.hzdr.de/publications/Publ-6766
Two-Phase Boundary Layer Prediction In Upward Boiling Flow
Končar, B.; Mavko, B.; Krepper, E.; Hassan, Y. A.
Abstract
In the present work, the numerical modelling of the two-phase turbulent boundary layer in upward boiling flow was investigated. First, non-dimensional liquid velocity and temperature profiles in the two-phase boundary layer were validated on the one-dimensional section of a pipe with prescribed radial void fraction profiles. Simulations were performed on a fine grid with a commercial code CFX-5 using the k-w turbulence model. A significant deviation of results from the analytical single-phase and two-phase wall functions from the literature was observed. Second, a wall boiling model in a vertical heated pipe was simulated (CFX-5) on the coarse grid. Here the prediction of the two-phase thermal boudary layer was compared to the experimental data, k-w calculation on the fine grid and against the single-phase analytical wall function. Again a major deviation against single-phase temperature wall function was obtained. Presented analyses suggest that the existing analytical velocity and temperature wall functions cannot be valid for the boiling boundary layer with the high void fraction on the wall.
Keywords: Computatioal fluid dynamics; two-phase flow; subcooled boiling; boundary layer
-
Contribution to proceedings
International Conference "Nuclear Energy for New Europe 2004", 06.-09.09.2004, Portoro, Slovenia
Permalink: https://www.hzdr.de/publications/Publ-6763
A limited-angle CT approach for a fast scanned electron-beam X-ray tomography with application to multi-phase flow measurements
Speck, M.; Hampel, U.; Koch, D.; Mayer, H.-G.; Menz, H.-J.; Prasser, H.-M.; Schleicher, E.
Abstract
We devised and tested a computed tomography approach that utilises a scanned electron beam X-ray source to produce multiple projections of an object at scan rates of 1000 frames per second and at an in-plane resolution of 1 mm. The measurement setup consists of an electron beam unit, a cylindrical tungsten target, and a detector line array which are operated inside a vacuum enclosure. By means of fast periodic electron beam deflection we produce a linearly moving focal X-ray spot on the tungsten target. The X-ray detector is read out in synchronisation with the beam deflection signal such that a set of consecutive tomographic projections from an object that is placed between target and detector can be obtained. This approach has some attractive features: it gives the highest achievable axial resolution, which is necessary to image fast moving flow structures and it is comparatively moderate in effort and costs. However, these advantages are compromised by the fact, that the projection data is incomplete with regard to the projection angle. The arising limited-angle problem may be solved by iterative image reconstruction algorithms. We will show, that this approach is suitable for a certain class of flow problems which are characterised by less complex object distributions and a high degree of available a-priori information, such as two-phase flows and particle tracking problems. In the presentation we will give an overview on the method, present first experimental results and discuss the image reconstruction process in some more detail.
Keywords: limited-angle tomography; high-speed tomography; algebraic reconstruction
-
Contribution to proceedings
Proceedings of the 4th World Congress on Industrial Process Tomography, 05.-08.09.2005, Aizu, Japan -
Lecture (Conference)
4th World Congress on Industrial Process Tomography, 05.-08.09.2005, Aizu, Japan
Permalink: https://www.hzdr.de/publications/Publ-6762
Gamma tomography with application to two-phase flow imaging in hydrodynamic machines
Hampel, U.; Baldauf, D.; Christen, M.; Diele, K.-H.; Fietz, J.; Höller, H.; Hoppe, D.; Kernchen, R.; Prasser, H.-M.; Will, G.; Zippe, C.; Zschau, J.; (Editors)
Abstract
We discuss the application of gamma tomography to the fully three-dimensional measurement of gas and fluid distributions inside rotating hydrodynamic machines. For such investigations we use a gamma tomography setup that currently employs a Cs-137 source of 180 GBq activity and approximately 5 mm focal spot together with a detector arc made of 64 scintillation crystals (BGO) with photomultiplier read-out. The detector is operated in pulse counting mode with energy discrimination. In the presentation we will introduce the principle of phase-correlated projection acquisition. Thus, projection data of a rotating object is acquired by a fast detector read-out and subsequent integration of the data for a set of equal angular intervals which are recorded by an angle sensor at the rotating object. As a first example we demonstrate the measurement of gas fractions in an axial pump that is in two-phase flow operation. In this study we were able to visualise the gas profiles at 10% gas fraction within the impeller of the pump at different axial measurement planes. The results directly provided an understanding of the interrelation between the hydraulic conveyance characteristics of the pump in two-phase flow operation and the flow structure in the impeller. In a second example we introduce the measurement of fluid distributions in a hydrodynamic coupling. In this study we successfully applied gamma tomography to visualise flow patterns inside the coupling for varying filling levels and slips. These results now find application in the optimisation of coupling designs and in the validation of computational fluid dynamics simulations for such devices.
Keywords: gamma tomography; two-Phase flow imaging
-
Contribution to proceedings
Proceedings of the 4th World Congress on Process Tomography, 05.-08.09.2005, Aizu, Japan
Permalink: https://www.hzdr.de/publications/Publ-6761
Characterization of Er : LiNbO3 and APE : Er : LiNbO3 by RBS-channeling and XRD techniques
Mackova, A.; Groetzschel, R.; Eichhorn, F.; Nekvindova, P.; Spirkova, J.
Abstract
The samples of erbium-doped lithium niobate (Er:LiNbO3) were prepared by the standard Czochralski method and treated by the annealed proton exchange (APE) procedure to create a planar waveguide for further optical application. The positions of Er atoms in the crystal lattice of pristine and APE treated Er:LiNbO3 samples were studied by the Rutherford backscattering spectrometry (RBS)-channeling method. The Er3+ ion positions in the pristine and the APE treated Er:LiNbO3 samples are compared. X-ray diffraction (XRD) was used to determine the damage to the crystal structure caused by the APE treatment. It was found that the APE treatment leads to significant crystal structure damage and to shifts of the Er3+ ions from their positions in the pristine crystal.
Keywords: Er:LiNbO3; RBS-channeling; APE treatment; optical waveguides
- Surface and Interface Analysis 36(2004)8, 949-951
Permalink: https://www.hzdr.de/publications/Publ-6759
Optical and electronic properties of CrOxNy films, deposited by reactive DC magnetron sputtering in Ar/N2/O2(N2O) atmospheres
Mientus, R.; Grötzschel, R.; Ellmer, K.
Abstract
Chromium oxynitride films CrOxNy were prepared by reactive magnetron sputtering from a chromium target in Ar/O-2(N2O)/N-2 gas mixtures. The argon-to-nitrogen partial pressure ratio and the DC discharge power were kept constant in the experiments. By changing the gas composition the film stoichiometry can be continuously varied from CrN to Cr2O3. The film composition has been determined by Rutherford backscattering (RBS) and by elastic recoil detection analysis (ERDA). From an XRD analysis it was concluded that the films consist of CrN nanocrystals in an amorphous oxide matrix. Depending on the oxygen content [O], the electronic behaviour of the films changes, accompanied by the evolution of an optical band gap, which was determined by spectral transmission and reflection measurements. The (negative) temperature coefficient at approximate to 300 K of the resistivity of the films is in the range of 0.5 (CrN) to 2% K-1 (CrO0.5N0.7). This film property can be used for temperature-dependent resistors, for instance in thermal radiation detectors.
Keywords: chromium oxid; chromium nitride; reactive magnetron sputtering; ion beam analysis electronic properties
-
Surface & Coatings Technology 200(2005)(1-4), 341-345
ISSN: 0257-8972
Permalink: https://www.hzdr.de/publications/Publ-6758
A study of the dechanneling of protons in SiC polytype crystals in the energy range E-p=400-650 keV
Kokkoris, M.; Perdikakis, G.; Kossionides, S.; Petrovic, S.; Vlastou, R.; Grötzschel, R.
Abstract
In the present work, the energy spectra of protons channeled along the (0 0 0 1) axis of SiC polytype crystals (namely 4H and 6H) in the energy range E-P = 400-650 keV, in the backscattering geometry, were taken and analyzed. Computer simulations are in very good agreement with the measured spectra. The accurate reproduction of the experimental channeling spectra in the backscattering geometry is strongly based on the investigation of the correct dechanneling function and a, the ratio of the stopping powers in the aligned and random mode. In the present work, the applicability of a Gompertz type sigmoidal dechanneling function, with two parameters, k and x(c), which represent characteristic dechanneling rate and range, respectively, is examined, and the results are compared to the ones obtained in the past, concerning the same polytype structures, based on the assumption that the dechanneling of protons follows an exponential law, for the energy range E-P = 1.7-2.4 MeV.
-
Nuclear Instruments and Methods in Physics Research B 219-20(2004), 226-231
DOI: 10.1016/j.nimb.2004.01.058
Cited 2 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6757
The Influx of Neutral Amino Acids into the Porcine Brain During Development: A Positron Emission Tomography Study
Brust, P.; Vorwieger, G.; Walter, B.; Füchtner, F.; Stark, H.; Kuwabara, H.; Steinbach, J.; Bauer, R.
Abstract
Pigs of three different age groups (newborns, 1 week old, 6 weeks old) were used to study the transport of the large neutral amino acids 6-[F-18]fluoro-L-DOPA ([F-18]FDOPA) and 3-O-methyl-6-[F-18]fluoro-L-DOPA ([F-18]OMFD) across the blood-brain barrier (BBB) with positron emission tomography (PET). Compartmental modeling of PET data was used to calculate the blood-brain clearance (K-1) and the rate constant for the brain-blood transfer (k(2)) of [F-18]FDOPA and [F-18]OMFD after i.v. injection. A 40-70% decrease of K-1(OMFD), K-1(FDOPA) and k(2)(OMFD) from newborns to juvenile pigs was found whereas k(2)(FDOPA) did not change. Generally, K-1(OMFD) and k(2)(OMFD) are lower than K-1(FDOPA) and k(2)(FDOPA) in all regions and age groups. The changes cannot be explained by differences in brain perfusion because the measured regional cerebral blood flow did not show major changes during the first 6 weeks after birth. In addition, alterations in plasma amino acids cannot account for the described transport changes. In newborn and juvenile pigs, HPLC measurements were performed. Despite significant changes of single amino acids (decrease: Met, Val, Leu; increase: Tyr), the sum of large neutral amino acids transported by LAT1 remained unchanged. Furthermore, treatment with a selective inhibitor of the LAT1 transporter (BCH) reduced the blood-brain transport of [F-18]FDOPA and [F-18]OMFD by 35% and 32%, respectively. Additional in-vitro studies using human LAT1 reveal a much lower affinity of FDOPA compared to OMFD or L-DOPA. The data indicate that the transport system(s) for neutral amino acids underlie(s) developmental changes after birth causing a decrease of the blood-brain barrier permeability for those amino acids during brain development. It is suggested that there is no tight coupling between brain amino acid supply and the demands of protein synthesis in the brain tissue. (C) 2004 Elsevier B.V. All rights reserved.
- Developmental Brain Research 152(2004), 241-253
Permalink: https://www.hzdr.de/publications/Publ-6756
Hydromagnetic dynamo experiments
Stefani, F.
Abstract
Planetary, stellar, and galactic magnetic fields are caused by the hydromagnetic dynamo action in moving electrically conducting fluids. While theory and numerics of hydromagnetic dynamos have flourished during the last decades, an experimental validation of the effect was missing until recently. Therefore, it was a nice coincidence that, after years of preparations, the large-scale liquid sodium dynamo facilities in Riga and Karlsruhe became operative nearly simultaneously at the end of 1999. Since those pioneering times, a number of runs have been carried out in either place, yielding reproducible data on the kinematic as well as on the saturation regime. With the main focus on the Riga experiment, I give a summary of what has been achieved so far and what is left for future dynamo experiments.
-
Lecture (others)
Seminarvortrag, Technische Universiteit Delft, 20.10.2004, Delft, Netherlands
Permalink: https://www.hzdr.de/publications/Publ-6755
Depth profiling of light elements in PAMBE-grown GaN and helium-implanted titanium with heavy ion time-of-flight elastic recoil detection
Markwitz, A.; Kennedy, V. J.; Durbin, S. M.; Johnson, P. B.; Mücklich, A.; Dytlewski, N.
Abstract
The heavy ion time-of-flight elastic recoil detection analysis (HI-ERDA) technique was used to investigate the possibility of measuring near-surface elemental depth profiles of light and mid-Z elements in thin films of plasma-assisted molecular beam epitaxy (PAMBE)-grown GaN and helium-implanted titanium. The great advantage of HI-ERDA is the ability to measure mass-separated elemental depth profiles simultaneously. However for some materials it is not certain whether HI-ERDA can be used successfully because significant sputtering or other beam-induced damage may occur. The damage to the surfaces by a 77 MeV iodine beam was assessed using RBS, AFM and profilometry. The results show that for thin PAMBE-grown polycrystalline GaN films and for titanium that has been heavely implanted with helium a significant modification of the near-surface region is caused by the probing heavy ion beam. For the PAMBE-grown GaN films the most significant loss trend is observed for nitrogen. Surprisingly this was not accompanied by a change in surface topology. In contrast, an almost complete removal of the heavily helium-implanted surface layer was measured for the titanium specimens. The investigation shows that reference measurements with additional techniques such as RBS, AFM and profilometry have to be performed to ascertain sample integrity before HI-ERDA data can be used.
Keywords: HI-ERDA; GaN; He-implanted Ti; nanoporous surfaces; sputtering; depth profiling
-
Surface and Interface Analysis 36 (2004) 317-322
DOI: 10.1002/sia.1691
Cited 4 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6754
Investigation of the Formation and Phase Transition of Ge and Co Nanoparticles in a SiO2 matrix
Cantelli, V.; von Borany, J.; Mücklich, A.; Schell, N.
Abstract
The evolution of ion beam synthesized Co and Ge nanoclusters in a SiO2 matrix during annealing processes has been investigated by in-situ X-ray diffraction and ex-situ transmission electron microscopy. Remarkable differences has been found for Ge and Co clusters. For Ge implanted SiO2 films a clear influence of near-surface Ge oxidation and nanocluster melting has been established. Annealing at temperatures at around 1000°C leads to the formation of an ensemble of small (d~5 nm) nanocrystals. The cluster growth is mainly thermodynamically driven by classical diffusion limited Ostwald ripening. Contrary, for Co-implanted SiO2 films a drastic transition in nanoclusters evolution has been established. Within a relatively small temperature range at around 800°C an ensemble of small (d~4nm) amorphous Co clusters is transformed into a bimodal cluster distribution with large Co nanocrystals of 20-40 nm diameter near the surface. The influence of oxidation or nanocluster melting can be neglected.
Keywords: Nanoclusters; Cobalt; Germanium; Microstructure; XRD; TEM
-
Poster
4th Int. Conference on Synchrotron Radiation in Materials Science (SRMS-4), August 23-25, 2004, Grenoble, France
Permalink: https://www.hzdr.de/publications/Publ-6753
Recent developments in the field of nuclear safety research
Rindelhardt, U.; Weiss, F.-P.
Abstract
Some recent developments in the field of nuclear safety research will be presented. The contribution starts from the general aim of safety research to contribute to the sustainability of nuclear energy compared with other energy resources.
The first two examples refers to the safety of operating NPPs. Possible boron dilution transients can lead to reactivity accidents at certain conditions. Comprehensive experimental and numerical studies were carried out to identify the critical conditions of such transients. Another topic which belongs to the severe accident research - is the investigation of the reactor pressure vessel behaviour during core melt and corium in the lower plenum. Pre- and post-test calculations of the Swedish FOREVER-experiments will be presented.
The third topic deals with the transmutation of long-lived radionuclides. Up to now the radioactive waste has safely to be isolated for millions of years. Implementing new concepts a drastic reduction of waste and isolation time can be expected. As example accelerator driven systems (ADS) are discussed.
Keywords: Nuclear safety research; Boron dilution; severe accidents; partitioning and transmutation; ADS
-
Invited lecture (Conferences)
CO-MAT-TECH 2004, 12th International Scientific Conference, 14.-15.10.2004, Trnava, Slovakia
Permalink: https://www.hzdr.de/publications/Publ-6752
In-situ x-ray diffraction during sputter deposition of Ti1-xAlxN thin films
Beckers, M.; Schell, N.; Martins, R. M. S.; Möller, W.; (Editors)
Abstract
Due to improved hardness and oxidation resistance, Ti1-xAlxN coatings are constantly displacing TiN in tooling and microelectronic industry. Since the coating’s performance can be further increased by tailoring preferred orientation, an understanding of how deposition parameters influence thin film texture is crucial. The approach used here is in situ x-ray diffraction both in-plane and off-plane during film growth. For this purpose a growth chamber has been installed into the goniometer of the Rossendorf synchrotron BeamLine (ROBL) at the ESRF. Ti1-xAlxN films were deposited by reactive co-sputtering from metallic Ti and Al targets, varying substrate temperature, bias voltage and aluminum concentration. In-situ experiments with x~0.1 revealed competitive growth between low surface free energy (002) grains and low strain energy (111) grains parallel to the surface with (002) orientation dominating at higher substrate temperature in accordance with models found in literature. Contrary to pure TiN, here no sub-surface recrystallisation as a driving factor for texture crossover has been observed. Halving the deposition rate led to almost pure (002) fiber texture independent of film thickness pointing towards kinetic restrictions during film growth. Data of current experiments on nano-composite structured Ti1-xAlxN with x~0.5 will also be presented at the conference.
-
Poster
Plasma surface Engineering (PSE) 2004, Garmisch-Partenkirchen -
Lecture (Conference)
9th Int. Conf. on Plasma Surface Enginneering, 13.-17.09.2004, Garmisch-Partenkirchen, Germany
Permalink: https://www.hzdr.de/publications/Publ-6751
The crucial role of the diphosphine heteroatom X in the stereochemistry and stabilization of the substitution-inert [M(N)(PXP)]2+ metal fragments (M = Tc, Re; PXP = diphosphine ligand)
Tisato, F.; Refosco, F.; Porchia, M.; Bolzati, C.; Bandoli, G.; Dolmella, A.; Duatti, A.; Boschi, A.; Jung, C. M.; Pietzsch, H.-J.; Kraus, W.
Abstract
The nature of the heteroatom X incorporated in the five-member PXP-diphosphine spacer was found to play a primary unit role both in the stereochemical arrangement and overall stability of nitrido containing [M(N)(PXP)]2+ metal fragments (M = Tc, Re). Thus, by mixing PXP ligands with labile [Re(N)Cl4]- and [Tc(N)Cl2(PPh3)2] nitrido precursors in CH2Cl2/MeOH mixtures, a series of neutral [M(N)Cl2(PXP)] complexes (M = Tc, 1-5; M = Re, 8-9) was collected. In the resulting distorted octahedrons PXP adopted facial or meridional coordination, and combination with halide co-ligands produced three different stereochemical arrangements, i.e. fac,cis mer,cis and mer,trans, depending primarily on the nature of the diphosphine heteroatom X. When X = NH, mer,cis-[Tc(N)Cl2(PNP1)] 1 was the only isomer formed. Alternatively, when a tertiary amine nitrogen (X = NR; R = CH3, CH2CH2OCH3) was introduced in the spacer, fac,cis-[M(N)Cl2(PN(R)P)] complexes (M = Tc, 2, 3; M = Re, 8f) were obtained. Isomerization into the the mer,cis-[Re(N)Cl2(PN(R)P)], 8m, species was observed only in the case of rhenium when the tertiary amine group carried the less encumbering methyl substituent. Fac,cis-[Tc(N)Cl2(PSP)], 4f, was isolated in the solid state when X = S, but mixture of fac,cis-[Tc(N)Cl2(PSP)] and mer,trans-[Tc(N)Cl2(PSP)], 4m, isomers was found in equilibrium in the solution state. A similar equilibrium between fac,cis-[M(N)Cl2(POP)] (M = Tc, 5f; M = Re, 9f) and mer,trans-[M(N)Cl2(POP)] (M = Tc, 5m; M = Re, 9m) species was detected in POP containing complexes. The molecular structure of all of these complexes were assessed by means of conventional physico-chemical techniques including multinuclear NMR spectroscopy and X-ray diffraction analysis of representative mer,cis-[Tc(N)Cl2(PN(H)P)] 1, fac,cis-[Tc(N)Cl2(PSP)] 4f, and mer,cis-[Re(N)Cl2(PN(Me)P)] 8m compounds.
- Inorganic Chemistry 43(2004), 8617-8625
Permalink: https://www.hzdr.de/publications/Publ-6750
In-situ Charakterisierung während der Hochenergie - Sauerstoffionen - Implantation in Übergangsmetalle
Bohne, Y.; Shevchenko, N.; Prokert, F.; von Borany, J.; Rauschenbach, B.; Möller, W.
Keywords: In-situ; Implantation; Übergangsmetalle; Oxid
-
Poster
DPG - spring meeting, Regensburg, March 8-12, 2004
Permalink: https://www.hzdr.de/publications/Publ-6749
Surface processes and properties of ion implanted NiTi alloy
Shevchenko, N.; Pham, M.-T.; Richter, E.; Maitz, M. F.
Keywords: NiTi; ion implantation; surface; biocompatibility
-
Poster
9th International conference on plasma surface engineering, Garmisch-Partenkirchen, Germany, September 13 - 17, 2004
Permalink: https://www.hzdr.de/publications/Publ-6748
3-O-Methyl-6-18F-Fluoro-L-Dopa, a New Tumor Imaging Agent: Investigation of Transport Mechanism In Vitro
Bergmann, R.; Pietzsch, J.; Füchtner, F.; Pawelke, B.; Beuthien-Baumann, B.; Johannsen, B.; Kotzerke, J.
Abstract
18F-Labeled amino acids represent a promising class of imaging agents in tumors, particularly brain tumors. However, the determination of their potential to image peripheral tumors, possibly depending on individual transport characteristics, still remains an area of investigation. The present study investigated the transport mechanism for 3-O-methyl-618F-fluoro-L-dopa (OMFD), a novel 18F-labeled phenylalanine derivative, into tumor cells. Methods: OMFD has routinely and reliably been prepared for clinical use in 20 % - 25 % radiochemical yield (decay corrected, related to 18F-F2) using 6-18F-fluoro-L-3,4-dihydroxyphenylalanine preparation devices with minor modifications. In vitro uptake assays with HT-29 (human colon adenocarcinoma) cells, FaDu (squamous cell carcinoma) cells, and RBE4 (immortalized rat brain endothelial) cells were performed with OMFD under physiologic amino acid concentrations without and with the competitive transport inhibitors 2-aminobicyclo[2,2,1]-heptane-2-carboxylic acid and α-(methylamino)isobutyric acid plus serine and without or with Na+. Results: Transport inhibition experiments using specific competitive inhibitors demonstrated that uptake of OMFD in all cell lines tested was mediated mainly by the sodium-independent high-capacity amino acid transport systems. The highest OMFD uptake was in FaDu cells. Conclusion: OMFD seems to be a promising PET tracer for imaging of amino acid transport in tumors.
Keywords: amino acid transport; 18F; PET; radiotracer
- Journal of Nuclear Medicine 45(2004), 2116-2122
Permalink: https://www.hzdr.de/publications/Publ-6747
Fluid-dynamic instabilities during mass transfer across the interface between to immiscible liquids
Grahn, A.; Prasser, H.-M.
Abstract
Experiments and simulations were conducted in a vertically oriented Hele-Shaw cell. Buoyancy driven convection, in particular plumes and double diffusive fingering as well as surface tension driven convection in the form of roll cells have been found in the experiments and reproduced numerically. The calculations reveal the mechanism of the enhancement of mass transfer rates in the presence of the instabilities. The model can be used to predict the mass transfer for the simple geometry of a flat surface.
Keywords: double diffusive instability; Marangoni effect; mass transfer; chemical reaction
-
Contribution to proceedings
6th world conference on experimental heat transfer, fluid mechanics and thermodynamics, 17.-21.04.2005, Miyagi, Japan
Permalink: https://www.hzdr.de/publications/Publ-6746
Improvements of tribological properties of CrNiMo and CrCoMo alloys by nitrogen plasma immersion ion implantation
Ueda, M.; Berni, L. A.; Castro, R. M.; Reuther, H.; Lepienski, C. M.; Soares Jr., P. C.
Abstract
Improvements of tribological properties of CrNiMo and CrCoMo alloys by nitrogen plasma immersion ion implantation
-
Lecture (Conference)
9th International Conference on Plasma Surface Engineering, September 13 - 17, 2004, Garmisch-Partenkirchen
Permalink: https://www.hzdr.de/publications/Publ-6744
Chromium enrichment of AISI 304 stainless steel surface after nitrogen ion recoil bombardment of chromium film
Gomes, G. F.; Ueda, M.; Beloto, A. F.; Reuther, H.; Richter, E.
Abstract
Chromium enrichment of AISI 304 stainless steel surface after nitrogen ion recoil bombardment of chromium film
-
Lecture (Conference)
8th European Conference on Accelerators in Applied Research and Technology September 20-24, 2004 Paris
Permalink: https://www.hzdr.de/publications/Publ-6743
Comparison of nitrogen ion beam and plasma immersion implantation in Al5052 alloy
Ueda, M.; Reuther, H.; Lepienski, C. M.
Abstract
Comparison of nitrogen ion beam and plasma immersion implantation in Al5052 alloy
-
Lecture (Conference)
8th European Conference on Accelerators in Applied Research and Technology September 20-24, 2004, Paris, France
Permalink: https://www.hzdr.de/publications/Publ-6742
Plasma immersion ion implantation of nitrogen into H13 steel under moderate temperatures
Ueda, M.; Leandro, C.; Reuther, H.; Lepienski, C. M.
Abstract
Plasma immersion ion implantation of nitrogen into H13 steel under moderate temperatures
-
Lecture (Conference)
8th European Conference on Accelerators in Applied Research and Technology September 20-24, 2004, Paris, France
Permalink: https://www.hzdr.de/publications/Publ-6741
Sn4+ charge density variation in In2O3
Reuther, H.; Menzel, M.; Vinnichenko, M.; Kolitsch, A.
Abstract
Thin tin-doped indium oxide films have a low resistivity (10-3-10-4 W·cm) and a high luminous transmittance (>80%) [1]. Therefore they find an application as electrodes in flat panel displays, solar cells, etc.
The lowest resistivities (in the order of 1·10-4 W·cm) are reported for ITO films prepared by sputtering of ceramic targets which are expensive and mechanically fragile. The stable process with metallic targets can be much more favorable for industrial application, because of low cost and high deposition rates. The production of ITO films with low resistivity by reactive sputtering usually requires postdeposition annealing step or deposition on heated substrates [1].
A number of publications were devoted to investigate ITO powders with different Sn content [2] and ITO films subjected to oxidizing and reducing annealing [3]. These films were prepared from ceramic targets. Mössbauer spectroscopy in combination with X-ray diffraction and Hall measurements have been applied in these studies on ITO to investigate the chemical state of Sn atoms.
Similar investigations on the ITO films prepared by reactive magnetron sputtering at elevated substrate temperatures are missing up to now. Therefore indium-tin oxides (ITO) films were deposited by reactive middle frequency dual magnetron sputtering at heated substrates.
The doping of Sn in In2O3 was investigated using the surface sensitive 119mSn Conversion-Electron Mössbauer Spectroscopy (CEMS) to investigate the chemical state of tin.
-
Poster
International Symposium on the Industrial Applications of the Mössbauer Effect, 4-9 October, 2004. Madrid
Permalink: https://www.hzdr.de/publications/Publ-6740
Einfluss unvermeidbarer Patientenbewegungen auf PET-Hirnuntersuchungen
Bühler, P.; Langner, J.; Kotzerke, J.; van den Hoff, J.
-
Abstract in refereed journal
Nuklearmedizin 43(2004), V196 -
Lecture (Conference)
42. Jahrestagung der Deutschen Gesellschaft für Nuklearmedizin, 21.-24.04.2004, Rostock, Germany
Permalink: https://www.hzdr.de/publications/Publ-6739
Scanning capacitance microscopy and spectroscopy on SiO2 films with embedded Ge and Si nanoclusters
Beyer, R.; Beyreuther, E.; von Borany, J.; Weber, J.
Abstract
Scanning capacitance microscopy (SCM) and -spectroscopy (SCS) were applied to study the charge trapping and the charge retention in silicondioxide layers with embedded Ge- or Si-nanoclusters. The nanoclusters were formed by ion beam synthesis. Applying a dc bias to the conductive nano-tip charge injection into the dielectric was achieved. While SCM images visualize the localized trapped charge in the oxide, the locally recorded dC/dV versus V curves allow to quantify the trap density. The evaluation of dCldV shifts was used to compare the electronic properties of different oxide layers in dependence on the implantation parameters. In addition it is demonstrated, that combined SCM/SCS measurements are a suitable tool for the examination of the charge decay as well as of the reliability and degradation of oxide layers on a nanoscale.
Keywords: Interface states; Charge; Junctions; Dynamics; Layer
- Microelectronic Engineering 72(2004), 207-212
Permalink: https://www.hzdr.de/publications/Publ-6738
Luminescence center transformation in wet and dry SiO2
Fitting, H.-J.; Ziems, T.; von Czarnowski, A.; Schmidt, B.
Abstract
The main luminescent centers in SiO2 films are the red luminescence R (1.85 eV) of the nonbridging oxygen hole center (NBOHC) and the oxygen deficient center (ODC) with a blue B (2.7 eV) and a UV (4.4 eV). By means of a new "track-stop" technique we have investigated especially the initial luminescence behaviour at the beginning of irradiation. Thus the blue-emitting center is produced under irradiation , but from existing precursers. Contrary to that, the dose behaviour of the red (R) luminescence in wet and dry oxide is quite different, decreasing in wet oxide from a high initial level and increasing in dry oxide from almost zero. We propose a model of luminescence center transformation based on radiolytic dissociation and the reactions of mobile oxygen and hydrogen.
Keywords: Cathodoluminescence; irradiation dose; center transformation; precursers
- Radiation Measurements 38(2004), 649-753
Permalink: https://www.hzdr.de/publications/Publ-6737
Ion-beam Synthesis of Nanocrystals for Multidot Memory Structures
Beyer, V.; von Borany, J.
Abstract
not available
-
Contribution to external collection
E.Zschech, C.Whelan, T.Mikolajick: Materials for Information Technology - Devices, Interconnects and Packaging; Series: Engineering Materials and Processes, Berlin: Springer-Verlag, 2005, 1-85233-941-1
Permalink: https://www.hzdr.de/publications/Publ-6736
Dendrimers for Separation Processes
Gloe, K.; Antonioli, B.; Gloe, K.; Stephan, H.
-
Contribution to external collection
C. A. M. Afonso, J. G. Crespo: Green Separation Processes, Weinheim: Wiley-VCH, 2005, 3-527-30985-3, 304-322
Permalink: https://www.hzdr.de/publications/Publ-6728
Untersuchungen zur Kühlmittelvermischung: Ergebnisse numerischer Simulationen mit CFX-5 im Vergleich mit experimentellen Ergebnissen an der Vermischungsanlage ROCOM
Höhne, T.
Abstract
The coolant mixing in the downcomer and the lower plenum of pressurized water reactors (PWR) is significant for safety assessment of boron dilution and cold water transients.
The research project FLOMIX-R within the 5th Framework Programme of EC had the objective to obtain experimental data on the relevant coolant mixing phenomena using improved measurement techniques with enhanced resolution in space and time for CFD validation.
Recent experiments at the Rossendorf test facility ROCOM were integrated into this research project. ROCOM is a 1:5 scaled Plexiglas model of a German PWR allowing conductivity measurements by wire mesh sensors for analyzing the mixing pattern at selected positions in the reactor pressure vessel and velocity measurements by LDA technique.
A few benchmark problems based on selected experiments were used to study the effect of different turbulent mixing models under various flow conditions, to investigate the influence of the geometry, the boundary conditions, the grid and the time step in the CFD analyses. In doing the calculations the Best Practice Guidelines for nuclear reactor safety calculations have been followed. Results of this numerical mixing studies will be discussed.
Keywords: Boron Dilution; CFD; Kühlmittelvermischung; Borverdünnung
-
Invited lecture (Conferences)
Forschungzentrum Karlsruhe, Insitut für Reaktorsicherheit, Seminarreihe 2004/2005, 13.01.2005, Karlsruhe, Germany
Permalink: https://www.hzdr.de/publications/Publ-6727
Transient effects in fission from new experimental signatures
Jurado, B.; Schmitt, C.; Schmidt, K.-H.; Benlliure, J.; Enqvist, T.; Junghans, A. R.; Kelic, A.; Rejmund, F.
Abstract
A new experimental approach is introduced to investigate the relaxation of the nuclear deformation degrees of freedom. Highly excited fissioning systems with compact shapes and low angular momenta are produced in peripheral relativistic heavy-ion collisions. Both fission fragments are identified in atomic number. Fission cross sections and fission-fragment element distributions are determined as a function of the fissioning element. From the comparison of these new observables with a nuclear-reaction code a value for the transient time is deduced.
-
Physical Review Letters 93(2004), 072501
DOI: 10.1103/PhysRevLett.93.072501
Cited 80 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-6726
Electroproduction of Strangeness on 3,4λH bound states on Helium
Dohrmann, F.; Ahmidouch, A.; Armstrong, C. S.; Arrington, J.; Asaturyan, R.; Avery, S.; Bailey, K.; Baker, O. K.; Bitao, H.; Breuer, H.; Brown, D. S.; Carlini, R.; Cha, J.; Chant, N.; Christy, E.; Cochran, A.; Cole, L.; Crowder, J.; Danagoulian, S.; Elaasar, M.; Ent, R.; Fenker, H.; Fujii, Y.; Gan, L.; Garrow, K.; Geesaman, D. F.; Gueye, P.; Hafidi, K.; Hinton, W.; Juengst, H.; Keppel, C.; Liang, Y.; Liu, J. H.; Lung, A.; Mack, D.; Markowitz, P.; Mitchell, J.; Miyoshi, T.; Mkrtchyan, H.; Mtingwa, S. K.; Mueller, B.; Niculescu, G.; Niculescu, I.; Potterveld, D. H.; Raue, B. A.; Reimer, P. E.; Reinhold, J.; Roche, J.; Sarsour, M.; Sato, Y.; Segel, R. E.; Semenov, A. Y.; Stepanyan, S.; Tadevosian, V.; Tajima, S.; Tang, L.; Uzzle, A.; Wood, S.; Yamaguchi, H.; Yan, C.; Yuan, L.; Zeier, M.; Zeidman, B.; Zihlmann, B.
Abstract
The A(e,e'K+)X reaction has been investigated at Jefferson Laboratory. Data were taken for Q2 approx 0.35\,\rm GeV2 at a beam energy of 3.245 GeV for 1H,3He and 4He targets.
Evidence for Lambda-hypernuclear bound states is seen for 3,4He targets. This is the first time that the electroproduction of these hypernuclei has been observed.
Keywords: Electroproduction of Strangeness; Hyperons; Hypernuclear Physics
-
Contribution to proceedings
AIP Conference Proceedings 768(2005), 294, Proceedings of the 19th European Conference on Few-Body Problems in Physics
Permalink: https://www.hzdr.de/publications/Publ-6725
Application of ultra-high energy boron implantation for superjunction power (CoolMOS) devices
von Borany, J.; Friedrich, M.; Rüb, M.; Deboy, G.; Butschke, J.; Letzkus, F.
Abstract
Superjunction devices (SJDs) are a novel class of power devices which break the physical limit of silicon with respect to the area specific turn-on-resistance. SJDs consist of a modified vertical MOSFET structure which is characterized by additional deep pillar-like p-type regions formed inside the n(-) epi-layer below the transistor gate. In the present investigation ultra-high energy boron ion implantation of 2-25 MeV were applied for forming the deep p-type regions laterally structured using Si stencilmasks. For energies above 12 MeV the incident ions exceed the Coulomb barrier for Si which leads (i) to a significant gamma and neutron emission during implantation and, (ii) an activation of the wafer and the mask material. Fortunately, the most relevant reaction (11B+28Si >n,alpha>34mCl> 34S+beta) has a half-life time of only 32 min so that the radiation level of the wafers drops below the critical radiation protection limit within the processing time. Based on the described technology Infineon Technologies successfully prepared a set of prototype wafers with fully functional high-voltage transistors. Typical blocking capability was in the range of 560 V with an on-state resistance of about 185 mOhm.
Keywords: Power devices; Si doping; Ultra-high energy ion implantation; nuclear reactions
-
Lecture (Conference)
15th Intern. Conference on Ion Implantation Technology 2004, 24.-29.10.2004, Taipeh, PR China (Taiwan) - Nuclear Instruments and Methods in Physics Research B 237(2005), 62-67
Permalink: https://www.hzdr.de/publications/Publ-6724
In-situ X-ray diffraction investigations during high-energy oxygen ion iplantation in transition metals
Bohne, Y.; Shevchenko, N.; Prokert, F.; von Borany, J.; Rauschenbach, B.; Moeller, W.
Abstract
An in-situ X-ray diffraction study was performed to characterize aspects of the kinetics of struc-tural phase formations in transition metals during oxygen implantation. A special designed high-temperature vacuum chamber for X-ray measurements was installed at the high-energy implantation beamline of the 3 MV-Tandetron accelerator. Titanium and molybdenum sheets were implanted with oxygen ions with an energy of 1.5 MeV up to a fluence of 1.6 × 1018 O+-ions/cm2 without sample cooling. During implantation, the phase formation was continually investigated by in-situ and real-time X-ray diffraction (XRD) with a position sensitive proportional counter system. The phase formation was studied during annealing treatments by in-situ XRD. The obtained results were com-pared with ex-situ XRD measurements performed by different techniques at a standard diffractometer. The analysis of XRD patterns indicates the formation of a buried MoO2 layer in molybdenum. In the Ti-samples no buried oxide is formed due to significant oxygen diffusion.
Keywords: In-situ XRD; Ion implantation; Transition metals; Phase formation
-
Contribution to proceedings
13th International School on Vacuum, Electron and Ion Technologies, 15 19 September, 2003, Varna, Bulgaria - Vacuum 76(2004)2-3, 281-285
Permalink: https://www.hzdr.de/publications/Publ-6723
86Y-Markierung von Neurotensin(8-13)-Derivaten
Schlesinger, J.; Bergmann, R.; Seifert, S.; Wüst, F.
-
Lecture (others)
12. Jahrestagung der AG Radiochemie/Radiopharmazie, 23.-25.09.2004, Walberberg, Germany
Permalink: https://www.hzdr.de/publications/Publ-6722
Rhenium-188-Gemischtligandkomplexe mit Phoshinliganden: Stabilitätsbetrachtungen
Schiller, E.
-
Lecture (others)
12. Jahrestagung der AG Radiochemie/Radiopharmazie, 23.-25.09.2004, Walberberg, Germany
Permalink: https://www.hzdr.de/publications/Publ-6721
Untersuchungen zur Bioverteilung und Elimination des Isopeptides N-ε-(γ-Glutamyl)-lysin mittels Positronen-Emissions-Tomographie
Hultsch, C.; Bergmann, R.; Pawelke, B.; Pietzsch, J.; Wüst, F.; Johannsen, B.; Henle, T.
-
Lecture (Conference)
14. Arbeitstagung der Lebensmittelchemischen Gesellschaft Fachgruppe in der Gesellschaft Deutsche Chemiker Regionalverband Süd-Ost, 01.-02.04.2004, Halle, Germany -
Lecture (Conference)
11. Jahrestagung der AG Radiochemie/Radiopharmazie, Leipzig-Brehna, 18.09.2003
Permalink: https://www.hzdr.de/publications/Publ-6720
Neuartige Re-188-Komplexe abgeleitet von Dimercaptobernsteinsäure
Heinrich, T.
-
Lecture (others)
12. Jahrestagung der AG Radiochemie/Radiopharmazie, 23.-25.09.2004, Walberberg, Germany
Permalink: https://www.hzdr.de/publications/Publ-6719
Ultrafast carrier dynamics in nitrogen containing GaAs
Dekorsy, T.; Sinning, S.; Helm, M.; Mussler, G.; Daweritz, L.; Ploog, K. H.
Abstract
Poster of experimental results of time resolved carrier relaxation of nitrogen containing GaAs
Keywords: GaNAs; MBE; Implantation; carrier relaxation; nitrogen; III-V; ultrafast
-
Poster
presented at the 27th International Conference on the Physics of Semiconductors (ICPS) ,July 25-30, 2004 in Flagstaff, Arizona, USA. -
Contribution to proceedings
27th Int. Conf. on the Physics of Semiconductors, 26.-30.07.2004, Flagstaff, AZ, USA
American Institute of Physics Conference Proceedings 772(2005), 235-236
Permalink: https://www.hzdr.de/publications/Publ-6718
Rhenium-188: Chemie eines therapeutischen interessanten Radionuklides
Heinrich, T.
-
Invited lecture (Conferences)
Bundesanstalt für Materialforschung und prüfung, 19.03.2004, Berlin, Germany
Permalink: https://www.hzdr.de/publications/Publ-6717
Synthese und radiopharmakologische Untersuchung eines 18F-markierten Resveratrolderivates
Gester, S.; Pietzsch, J.; Wüst, F.
-
Lecture (others)
12. Jahrestagung der AG Radiochemie/Radiopharmazie, 23.-25.09.2004, Walberberg, Germany
Permalink: https://www.hzdr.de/publications/Publ-6716
Years: 2023 2022 2021 2020 2019 2018 2017 2016 2015
Pages: [1.] [2.] [3.] [4.] [5.] [6.] [7.] [8.] [9.] [10.] [11.] [12.] [13.] [14.] [15.] [16.] [17.] [18.] [19.] [20.] [21.] [22.] [23.] [24.] [25.] [26.] [27.] [28.] [29.] [30.] [31.] [32.] [33.] [34.] [35.] [36.] [37.] [38.] [39.] [40.] [41.] [42.] [43.] [44.] [45.] [46.] [47.] [48.] [49.] [50.] [51.] [52.] [53.] [54.] [55.] [56.] [57.] [58.] [59.] [60.] [61.] [62.] [63.] [64.] [65.] [66.] [67.] [68.] [69.] [70.] [71.] [72.] [73.] [74.] [75.] [76.] [77.] [78.] [79.] [80.] [81.] [82.] [83.] [84.] [85.] [86.] [87.] [88.] [89.] [90.] [91.] [92.] [93.] [94.] [95.] [96.] [97.] [98.] [99.] [100.] [101.] [102.] [103.] [104.] [105.] [106.] [107.] [108.] [109.] [110.] [111.] [112.] [113.] [114.] [115.] [116.] [117.] [118.] [119.] [120.] [121.] [122.] [123.] [124.] [125.] [126.] [127.] [128.] [129.] [130.] [131.] [132.] [133.] [134.] [135.] [136.] [137.] [138.] [139.] [140.] [141.] [142.] [143.] [144.] [145.] [146.] [147.] [148.] [149.] [150.] [151.] [152.] [153.] [154.] [155.] [156.] [157.] [158.] [159.] [160.] [161.] [162.] [163.] [164.] [165.] [166.] [167.] [168.] [169.] [170.] [171.] [172.] [173.] [174.] [175.] [176.] [177.] [178.] [179.] [180.] [181.] [182.] [183.] [184.] [185.] [186.] [187.] [188.] [189.] [190.] [191.] [192.] [193.] [194.] [195.] [196.] [197.] [198.] [199.] [200.] [201.] [202.] [203.] [204.] [205.] [206.] [207.] [208.] [209.] [210.] [211.] [212.] [213.] [214.] [215.] [216.] [217.] [218.] [219.] [220.] [221.] [222.] [223.] [224.] [225.] [226.] [227.] [228.] [229.] [230.] [231.] [232.] [233.] [234.] [235.] [236.] [237.] [238.] [239.] [240.] [241.] [242.] [243.] [244.] [245.] [246.] [247.] [248.] [249.] [250.] [251.] [252.] [253.] [254.] [255.] [256.] [257.] [258.] [259.] [260.] [261.] [262.] [263.] [264.] [265.] [266.] [267.] [268.] [269.] [270.] [271.] [272.] [273.] [274.] [275.] [276.] [277.] [278.] [279.] [280.] [281.] [282.] [283.] [284.] [285.] [286.] [287.] [288.] [289.] [290.] [291.] [292.] [293.] [294.] [295.] [296.] [297.] [298.] [299.] [300.] [301.] [302.] [303.] [304.] [305.] [306.] [307.] [308.] [309.] [310.] [311.] [312.] [313.] [314.] [315.] [316.] [317.] [318.] [319.] [320.] [321.] [322.] [323.] [324.] [325.] [326.] [327.] [328.] [329.] [330.] [331.] [332.] [333.] [334.] [335.] [336.] [337.] [338.] [339.] [340.] [341.] [342.] [343.] [344.] [345.] [346.] [347.] [348.] [349.] [350.] [351.] [352.] [353.]