Details Sample Characterization
Mineral: |
Gibbsite |
Reference: |
PKZZ11 |
Supplier: |
Ward´s Natural Science Establishment (Rochester, NY) |
Preparation: |
cleaned by adding 10 g of each phase to a 180 mL centrifuge bottle with approximately 180 mL 0.01 M NaOH. The suspension was mixed for one hour then
centrifuged 60 minutes at 4500 rpm in a swing-bucket rotor (centrifuge: Allegra-22R, rotor:
S4180). This left particles less than 150 nm in suspension. The NaOH supernatant was decanted
and the solution was replaced with 0.01 M HNO3, mixed for 1 hour, then centrifuged as described above. The HNO3 phase was decanted and replaced with ultrapure MQ H2O. This suspension was mixed by hand for approximately 3 minutes then centrifuged, the aqueous phase decanted, and the procedure repeated 5 times. The final wet solids were transferred to a glass petri dish and dried in an oven at 105 °C. After drying, the solids were lightly ground with a mortar and pestle to break up aggregates then stored in glass vials |
Sample characterized via: |
☑ X-ray Diffraction (XRD)
|
|
1 data sets were retrieved
|