Publications Repository - Helmholtz-Zentrum Dresden-Rossendorf
Institute | Leading institute | |
---|---|
FS | FK | FW | FWI | FWP | FWK | FWO | FWD | FWH | FWG | FWM | FWU | FWZ | FWF | FWC | FKT | ||
Year | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | <=2018 | |
Type of publication | Articles ref. in Journals | Conference abstracts in ref. journals | Books | Proceedings | Wissenschaftlich-Technische Berichte/ HZDR-Reports | Lectures | Posters | Patents | Research data | Software | RODARE publications | |
Open Access | Yes | No | |
Search |
"Online First" included
Approved and published publications
Only approved publications
41875 Publications
A simple route to synchronized nucleation of self-catalyzed GaAs nanowires on silicon for sub-Poissonian length distributions
Tauchnitz, T.; Berdnikov, Y.; Dubrovskii, V. G.; Schneider, H.; Helm, M.; Dimakis, E.
Abstract
We demonstrate a simple route to grow ensembles of self-catalyzed GaAs nanowires with a remarkably narrow statistical distribution of lengths on natively oxidized Si(111) substrates. The fitting of the nanowire length distribution with a theoretical model reveals that the key requirements for narrow length distributions are the synchronized nucleation of all nanowires on the substrate and the absence of beam shadowing from adjacent nanowires. Both requirements are fulfilled by controlling the size and number density of the openings in SiOx, where the nanowires nucleate. This is achieved by using a pre-growth treatment of the substrate with Ga droplets and two annealing cycles. The narrowest nanowire length distributions are markedly sub-Poissonian, which validates the theoretical predictions about temporally anti-correlated nucleation events in individual nanowires, the so-called nucleation antibunching. Finally, the reproducibility of sub-Poissonian length distributions attests the reliability of our growth method.
Keywords: substrate for nanowires; nucleation antibunching; nucleation delay; nanowire nucleation
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28118) publication
-
Nanotechnology 29(2018)50, 504004
DOI: 10.1088/1361-6528/aae361
Cited 16 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28118
Excitation of whispering gallery magnons in a magnetic vortex
Schultheiss, K.; Verba, R.; Wehrmann, F.; Wagner, K.; Körber, L.; Hula, T.; Hache, T.; Kákay, A.; Awad, A. A.; Tiberkevich, V.; Slavin, A. N.; Fassbender, J.; Schultheiss, H.
Abstract
We present the generation of whispering gallery magnons with unprecedented high wave vectors via nonlinear 3-magnon scattering in a μm-sized magnetic vortex state disc. These modes exhibit a strong localisation at the perimeter of the disc and practically zero amplitude in an extended area around the vortex core. They originate from the splitting of the fundamental radial magnon modes, which can be resonantly excited in a vortex texture by an out-of-plane microwave field. We shed light on the basics of this non-linear scattering mechanism from experimental and theoretical point of view. Using Brillouin light scattering (BLS) microscopy, we investigated the frequency and power dependence of the 3-magnon splitting. The spatially resolved mode
profiles give evidence for the localisation at the boundaries of the disc and allow for a direct determination of the modes wavenumber.
Keywords: magnons; spin wave; nonlinear magnetization dynamics; magnetic vortex; Brillouin light scattering
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28116) publication
-
Physical Review Letters 122(2019), 097202
DOI: 10.1103/PhysRevLett.122.097202
Cited 61 times in Scopus -
Invited lecture (Conferences)
International Conference on Magnetism, 19.07.2018, San Francisco, USA -
Invited lecture (Conferences)
APS March Meeting, 04.03.2019, Boston, USA -
Poster
Wilhelm und Else Heraeus-Seminar “Spin Based Information Processing”, 08.01.2019, Bad Honnef, Deutschland -
Lecture (Conference)
Joint European Magnetic Symposia (JEMS), 04.09.2018, Mainz, Deutschland -
Poster
Magnonics 2019, 28.07.2019, Carovigno, Italien -
Invited lecture (Conferences)
Magnetics and Optics Research International Symposium, 24.06.2019, Prague, Czech Republic -
Invited lecture (Conferences)
Conference on Magnetism and Magnetic Materials (MMM), 06.11.2019, Las Vegas, USA
Downloads
- Final Draft PDF 6,9 MB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28116
Steering magnons by noncollinear spin textures
Schultheiss, K.; Wagner, K.; Kákay, A.; Schultheiss, H.
Abstract
One of the grand challenges in cutting edge quantum and condensed matter physics is to harness the spin degree of electrons for information technologies. While spintronics, based on charge transport by spin polarized electrons, made its leap in data storage by providing extremely sensitive detectors in magnetic hard-drives [1], it turned out to be challenging to transport spin information without great losses [2]. With magnonics, a visionary concept inspired researchers worldwide: Utilize spin waves-the collective excitation quanta of the spin system in magnetically ordered materials-as carriers for information [3-8]. Spin waves, which are also called magnons, are waves of the electrons’ spin precessional motion. They propagate without charge transport and its associated Ohmic losses, paving the way for a substantial reduction of energy consumption in computers. While macroscopic prototypes of magnonic logic gates have been demonstrated [9, 10], the full potential of magnonics lies in the combination of magnons with nano-size spin textures. Both magnons and spin textures share a common ground set by the interplay of dipolar, spin-orbit, and exchange energies, rendering them perfect interaction partners. Magnons are fast, sensitive to the spins’ directions, and easily driven far from equilibrium. Spin textures are robust, nonvolatile, and still reprogrammable on ultrashort timescales. The vast possibilities offered by combining these magnetic phenomena add value to both magnonics and the fundamental understanding of complex spin textures. The scope of this chapter is about experimental studies on magnon transport in metallic ferromagnetic microstructures with focus on actively controlling the magnon propagation. Two inherent characteristics of magnons enable for lateral steering: the anisotropy of the magnon dispersion and its sensitivity to changes in the internal magnetic field distribution. We intend to give an idea of how these magnon features can be utilized toward realizing functionalized magnonic networks. © 2017 Pan Stanford Publishing Pte. Ltd.
Keywords: magnons; spin waves; spin textures; propagation; Brillouin light scattering
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28115) publication
-
Book chapter
Sergej O. Demokritov: Spin Wave Confinement: Propagating Waves, Second Edition, Singapore: Pan Stanford Publishing Pte. Ltd., 2017, 978-135161721-5;978-981477435-2, 261-294
DOI: 10.1201/9781315110820
Cited 5 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28115
Why are hot-rolled ODS steels more prone to secondary cracking than hot-extruded ODS steels?
Das, A.; Viehrig, H.-W.; Altstadt, E.; Bergner, F.; Hoffmann, J.
Abstract
Secondary cracks are known to absorb energy, retard primary crack propagation and initiate at lower loads than primary cracks. They are observed more often in hot-rolled than in hot-extruded ODS steels. In this work, the microstructural factors responsible for the same are investigated. A better understanding of these factors can lead to tailoring of improved ODS steels. Fracture toughness testing of 13Cr ODS steel in hot-rolled and in hot-extruded form were carried out. The fracture behaviour of secondary cracks was investigated using scanning electron and electron backscatter microscope. Crystallographic texture and grain morphology plays a predominant role in preventing secondary cracks in hot-extruded ODS steels. At lower temperatures, secondary cracks occur predominantly via transgranular cleavage. The fracture mode changes to ductile and intergranular at higher temperatures.
Keywords: ODS steel; nanostructured ferritic alloys; fracture behaviour; anisotropy; secondary cracking; delamination
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28114) publication
-
Poster
NuMat2018: The Nuclear Materials Conference, 15.10.2018, Seattle, USA
Permalink: https://www.hzdr.de/publications/Publ-28114
Diverse Effects of Phospholipase A2 Receptor Expression on LNCaP and PC-3 Prostate Cancer Cell Growth in vitro and in vivo
Friedemann, M.; Nacke, B.; Hagelgans, A.; Jandeck, C.; Bechmann, N.; Ullrich, M.; Belter, B.; Neuber, C.; Sukocheva, O.; Pietzsch, J.; Menschikowski, M.
Abstract
Physiological and pathophysiological functions of the phospholipase A2 receptor 1 (PLA2R1) are still not completely understood. To elucidate PLA2R1’s function in prostate carcinoma, the receptor was ectopically overexpressed in LNCaP with silenced PLA2R1, and diminished in PC-3 cells with constitutively increased PLA2R1 expression relative to normal prostate epithelial cells. LNCaP cells were transfected to overexpress PLA2R1 (LNCaP-PLA2R1) and compared to control vector transfected cells (LNCaP-Ctrl). Alternatively, a CRISPR/Cas9-knockdown of PLA2R1 was achieved in PC-3 cells (PC-3 KD) and compared to the corresponding control-transfected cells (PC-3 Ctrl). The impact of PLA2R1 expression on proliferative and metastatic parameters was analysed in vitro. A pilot in vivo study addressed the effects of PLA2R1 in mice xenografted with transfected LNCaP and PC-3 cells. Cell viability/proliferation and motility were significantly increased in LNCaP-PLA2R1 and PC-3 Ctrl compared to LNCaP-Ctrl and PC-3 KD cells, respectively. However, levels of apoptosis, clonogenicity and cell invasion were reduced in LNCaP-PLA2R1 and PC-3 Ctrl cells. Gene expression analysis revealed an up-regulation of fibronectin 1 (FN1), TWIST homolog 1 (TWIST1), and cyclin-dependent kinase 6 (CDK6) in LNCaP-PLA2R1. In LNCaP xenografts, PLA2R1-dependent regulation of clonogenicity appeared to outweigh the receptor’s pro-oncogenic properties, resulting in decreased tumour growth, supporting the tumour-suppressive role of PLA2R1. Alternatively, PC-3 Ctrl xenografts exhibited faster tumour growth compared to PC-3 KD cells, suggesting a pro-oncogenic effect of endogenous PLA2R1 expression. The differential growth-regulatory effects of PLA2R1 may be mediated by FN1, TWIST1, and CDK6 expression, although further investigation is required.
-
Oncotarget 9(2018), 35983-35996
DOI: 10.18632/oncotarget.26316
Permalink: https://www.hzdr.de/publications/Publ-28113
Electrochemical studies on zinc in boric acid containing electrolytes
Harm, U.; Kryk, H.; Hampel, U.
Abstract
During the sump recirculation phase after a leak in the primary cooling circuit of a pressurized water reactor (PWR), corrosion of hot-dip galvanized containment internals (e.g. grating treads, supporting grids of sump strainers) in the boric acid containing coolant may occur, which could later cause problems due to the possible precipitation of formed zinc borates (fouling) at hot regions of the reactor core [1, 2].
Beside other safety related investigations, generic zinc corrosion studies in boric acid electrolytes were conducted to investigate the dependency of the zinc corrosion rates in PWR coolants on different boundary conditions (fluid temperatures, pH, boric acid concentration, flow conditions nearby the zinc surface).
Corrosion experiments with dipped zinc sheets in stirred boric acid solutions already had shown that moderate variations of the fluid temperatures or the boric acid content only caused small changes in resulting zinc corrosion rates, but an increase of flow rates or turbulences often led to significantly increased corrosion rates [2].
For a better understanding of these results, additionally, some series of electrochemical measurements were carried out using a rotating disc electrode (zinc) as working electrode, a platinum counter electrode and tempered aqueous boric acid solutions (plus 0.1 M Na2SO4 as conducting salt) as electrolyte. Linear anodic and cathodic polarization was realized (up to potentials of 200 mV different from the free corrosion potential) under variation of fluid temperature (20 to 60 °C), boric acid content (1000 to 3000 ppm boron), pH (4.7 to 7) and the rotation speed.
First results of these experiments (e.g. comparing tafel plots) showed similar dependencies of the zinc corrosion rates than described above for the zinc dissolution experiments. The cathodic polarization curves mostly showed a plateau of the current densities with increasing cathodic polarization (overvoltage) indicating a strong control of the cathodic reaction (and thus the corrosion process as a whole) by the transport limitation of the dissolved oxygen to the zinc surface. Comparison of the tafel plots resulting from measurements at different rotation speeds (similar otherwise conditions) also demonstrated a strong increase of the zinc corrosion rates with increasing flow rates. For example, calculated zinc corrosion rates for infinite high rotation speeds (Levich extrapolation) usually are more than ten times higher compared to those of similar experiments without rotation. Therefore, also these results of the electrochemical investigations confirm the earlier results of a transport controlled corrosion process (see above) and may help to quantify the possible ranges of resulting corrosion rates at different boundary conditions.
This work is funded by the German Federal Ministry of Economic Affairs and Energy (BMWi) with the grant number 1501496 on the basis of a decision by the German Bundestag.
[1] Seeliger, A.; Alt, S.; Kästner, W.; Renger, S.; Kryk, H.; Harm, U.: Zinc corro¬sion after loss-of-coolant accidents in pressurized water reactors - thermo- and fluid-dynamic effects. Nuclear Engine-ering and Design, 2016, 305, 489-502
[2] Harm, U.; Kryk, H.; Hampel, U.: Generic Zinc Corrosion Studies at PWR LOCA Conditions. Annual Meeting on Nuclear Technology (AMNT 2017), 2017
Keywords: Nuclear energy; corrosion; zinc release; electrochemistry; experiments
-
Poster
Electrochemistry 2018, 24.-26.09.2018, Ulm (Universität Ulm), Deutschland
Permalink: https://www.hzdr.de/publications/Publ-28112
Impact of membrane biofouling in the sequential development of performance indicators: feed channel pressure drop, permeability, and salt rejection
Siebdrath, N.; Farhat, N.; Ding, W.; Kruithof, J.; Vrouwenvelder, J. S.
Abstract
Biofouling development is affected by a variety of factors that change over the length of membrane modules in pressure vessels. Spatially resolved biofouling formation was studied under conditions representative to practice using a validated one-meter Long Channel Membrane Test Cells (LCMTCs), enabling the monitoring of permeability and salt rejection for five segments over the test cell length. Biofouling was induced by dosing an easily assimilable substrate to the feed water. The impact of biofouling on membrane performance was investigated spatially resolved as indicated in feed channel pressure drop over four LCMTCs and as indicated in permeability and salt rejection over five segments of each LCMTC. Results showed that all membrane performance indicators: feed channel pressure drop, permeability and salt rejection were impacted by biofouling formation. The feed channel pressure (FCP) drop increase was impacted earliest and strongest followed by permeability and salt rejection decline, underlining that FCP drop is a sensitive biofouling monitoring indicator. Spatially resolved biofouling investigations revealed that most biofouling was formed in the lead sections of membrane installations with a decreasing gradient over length, linked to substrate availability in the system. In this study, FCP drop played a crucial role: the severe FCP drop increase at the lead parts of the membrane installation caused performance losses in flux and salt rejection at the tail parts of the membrane installation. Minimizing the effect of biofouling on membrane performance should be pursued by a combination of strategies involving (i) early detection and preventive cleaning, (ii) substrate limitation for delaying biofouling built-up and (iii) optimized (early) cleaning procedures for more effective biofilm removal.
Keywords: Biofouling; Reverse Osmosis; Feed channel pressure drop; Permeability; Salt rejection; Long channel membrane test cell
-
Journal of Membrane Science 585(2019), 199-207
DOI: 10.1016/j.memsci.2019.05.043
Cited 23 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28111
Bubble growth during subcooled nucleate boiling on a vertical heater: A mechanistic attempt to evaluate the role of surface characteristics on microlayer evaporation
Sarker, D.; Ding, W.; Hampel, U.
Abstract
For the modeling of nucleate boiling heat transfer, the bubble growth dynamics is of key importance. The study reported in this paper focuses on a qualitative assessment of the role of heater surface parameters on the bubble growth and the effective microlayer thickness constant, Ceff . The latter is part of a recently derived improved bubble growth model, which we utilize in our analysis along with high-resolution experimental data of the steam
bubble growth. The bubble growth model is formulated considering the evaporation of microlayer beneath the bubble, heat diffusion at the bubble surface and condensation at the bubble cap. We found that the values of Ceff are lower and the growth rates of bubble prior to departure are greater at the root mean square roughness of around Sq=0.12 μm for low-wetting surfaces. For well-wetting surfaces Ceff and the bubble growth rates are also found lower and greater, respectively at Sq=0.15 μm. Finally, a generalized equation for Ceff is proposed which comprises the effects of surface roughness and wettability on the bubble growth. The findings are useful for improving the bubble growth models and in designing the heater surface in the future.
Keywords: bubble growth model; surface wettability; optimal roughness height; microlayer evaporation
Involved research facilities
- TOPFLOW Facility
-
Applied Thermal Engineering 153(2019), 565-574
DOI: 10.1016/j.applthermaleng.2019.03.040
Cited 15 times in Scopus
Downloads
- Final Draft PDF 737 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28110
Investigations on the effects of heater surface characteristics on the bubble waiting period during nucleate boiling at low subcooling
Sarker, D.; Ding, W.; Franz, R.; Varlamova, O.; Kovats, P.; Zähringer, K.; Hampel, U.
Abstract
In nucleate boiling the ‘bubble waiting period’, that is, the time duration between the departure of a grown bubble and the start of the formation of a new bubble from a cavity, plays a crucial role for the total heat transfer. Experiments were performed to study the influence of the heater surface characteristics on this parameter. A femtosecond pulsed laser was used to produce nano- and micro-patterned surfaces with roughness in the range of micrometers on stainless steel heater surfaces. Boiling experiments were conducted on a vertically oriented heater at atmospheric pressure and with degassed deionized water. Bubble generation, departure, sliding, detachment and inception of the next bubble have been recorded by high-resolution optical shadowgraphy. Bubble waiting periods were found to be longer for low-wettability smooth and rough surfaces. High-wettability rough surfaces showed a shorter bubble waiting period. The shortest (approximately 3 ms) and the longest (approximately 30 ms) bubble waiting periods were found for well-wetting surfaces with Sq = 0.18 µm and for low-wetting surfaces with 0.12 µm, respectively. These corresponding roughness heights are denoted as ‘optimal roughness heights’.
Keywords: Bubble waiting periodSurface wettabilityRoughnessVertical heaterNucleate boiling
Involved research facilities
- TOPFLOW Facility
-
Experimental Thermal and Fluid Science 101(2019), 76-86
Online First (2018) DOI: 10.1016/j.expthermflusci.2018.09.021
Cited 12 times in Scopus
Downloads
- Final Draft PDF 3,9 MB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28109
Microbial and vegetal life in the near- and far-field of a nuclear waste repository
Raff, J.; Krawczyk-Bärsch, E.
Abstract
One of the so far unanswered question related to a nuclear waste repositiory is how big is the influence of biosystems on the safety of such a repository. Although this question can not be answered at this time, ongoing researches adress the questions of who lives in the possible host rocks, how do these organisms interact with radionuclides and what is their impact on the geochemical conditions there during the operation of a repository. This includes also researches on the microbial diversity in backfill materials such as bentonite and the microbial influence on their properties, e.g. swelling capacity and hydraulic conductivity. In addition, various procaryotic and eucaryotic organisms in the far-field of a repository, namely bacteria, fungi and plants, are currently being investigated for their interaction with radionuclides and their influence on radionuclide migration. The latter includes also a possible radionuclide entry into the food chain. The goal is to identify dominant processes and to understand them on a molecular level. Ultimately, this will allow to derive biological parameters which are suitable to be included in the radionuclide transport modeling. Identified processes will also be considered for the development of remediation concepts for the purification of contaminated water and soil.
In the second part of the talk, the interaction of uranium and neptunium with bacteriogenic iron oxides precipitates, formed by the ferrous oxidizing and stalk-forming bacterium Gallionella ferruginea from a granitic host rock, is presented in more detail. This work shows that bacteriogenic iron oxides have a high potential to immobilize radionuclides in nuclear waste repositories.
Keywords: nuclear waste repositiory; biogeochemistry; migration
Involved research facilities
- Rossendorf Beamline at ESRF DOI: 10.1107/S1600577520014265
Related publications
- DOI: 10.1107/S1600577520014265 is cited by this (Id 28108) publication
-
Lecture (others)
Scientific Seminar, 11.10.2018, Cadarache, Frankreich
Permalink: https://www.hzdr.de/publications/Publ-28108
Molekulare Geochemie für das nukleare Endlager
Abstract
In diesem Überblicksvortrag werden wissenschaftliche Fragestellungen zur Endlagerung hochradioaktiver Abfälle diskutiert. Die Komplexität des geotechnischen und -chemischen Systems inbesondere im Bezug zur Rückhaltung der minoren Actiniden und Plutonium wird dargestellt, um die Notwendigkeit für ein molekulares Prozessverständnis darzulegen. Letztlich wird an Beispielen diskutiert wie dieses Prozessverständnis erhalten werden kann und wie es zur Langzeitsicherheitsanalyse beiträgt.
Keywords: Endlager; Geochemie; Actiniden; molekulares Prozessverständnis
-
Invited lecture (Conferences)
50. Kraftwerkstechnisches Kolloquium, 23.-24.10.2018, Dresden, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-28107
Experimental assessment of inter-centre variation and accuracy in SPR prediction within the EPTN
Peters, N.; Wohlfahrt, P.; Bolsi, A.; de Marzi, L.; Ellerbrock, M.; Fracchiolla, F.; Free, J.; Gomà, C.; Góra, J.; Kajdrowicz, T.; Mackay, R.; Molinelli, S.; Nørrevang, O.; Rinaldi, I.; Rompokos, V.; Dahlgren, C. V.; van der Tol, P.; Vermeren, X.; Richter, C.
Abstract
Purpose/Objective:
The standard approach for CT-number to stopping-power-ratio (SPR) conversion in particle therapy is the use of a heuristic stepwise translation, a so-called Hounsfield look-up table (HLUT). It is defined by each treatment facility individually and depends on both the calibration method and CT scan protocol. A recent survey has shown broad variability in these parameters [1], making a simple comparison on HLUT level unfeasible. Hence, we present a comprehensive experimental evaluation of inter-centre variation and absolute accuracy in SPR prediction within the European Particle Therapy Network.
Material/Methods:
A head and a body phantom with 17 tissue surrogate inserts were scanned consecutively at the participating centres using their individual clinical scan protocol. The inserts were tissue-equivalent concerning particles; their composition and SPR were blinded for the participants. The SPR calculation was performed using each centre’s CT scan and HLUT (Fig.1).The inter- centre variation and absolute accuracy in SPR prediction were quantified for each tissue surrogate individually and then summarised into the relevant tissue groups: lung, soft tissues and bones. Finally, to evaluate the integral effect on range prediction for typical clinical beams traversing different tissues, for three simplified beam paths the determined SPR deviations were accumulated according to their respective tissue distribution. So far, data from 9 out of 17 participating centres was available.
Results:
A 2σ inter-centre variation in SPR prediction of 5.7% and 5.5% relative to water was determined for the bone inserts in the head and body setup, respectively. Comparable results were achieved for the lung tissue surrogates (6.4% and 2.2%). In the soft tissue region an overall higher accuracy was achieved with a variation below 0.9% in both setups and a mean SPR prediction accuracy below 0.5%. In the head setup, both lung tissues and bones were overestimated in most centres, while in the body setup the bones were underestimated (Fig. 2A). For the three exemplary beam paths, inter-centre variations in relative range were 1.5% on average. In specific centres, range deviations from reference exceeded 1.5% (Fig 2B).
Conclusion:
Large inter-centre variations in SPR prediction were observed in low- and high density tissue surrogates. The differences in deviation for bone between the two setups indicate a strong influence of scanning parameters such as the level of beam hardening correction, potentially resulting in range shifts of clinical relevance. As the study allows for a direct attribution of the measured deviations to the calibration methods and scan protocols used by the individual centres, it stresses the need for inter-centre standardisation. While this work addresses the accuracy in SPR prediction under idealised study conditions, a direct conclusion on overall range accuracy in patients is not possible. The study is currently still ongoing.
[1] Taasti et al. 2018, phiRO 6 25-30
-
Lecture (Conference)
European Society for Radiation & Oncology Congress 2019 ESTRO 38, 26.-30.04.2019, Milano, Italia -
Abstract in refereed journal
Radiotherapy and Oncology 133(2019), 348-349
DOI: 10.1016/S0167-8140(19)31087-4
ISSN: 0167-8140
Permalink: https://www.hzdr.de/publications/Publ-28106
Industrial flowsheeting and thermo-economic assessment
Reuter, M. A.; Llamasa, A. A.
Abstract
Session 2 was organised by the SOCRATES project. SOCRATES studies the development of near-zero waste processes for the recycling of low-grade metal containing industrial waste streams, such as bottom ashes, copper tailings and slags and sludges from the non-ferrous industry, commonly deposited in industrial landfills and tailing ponds. Markus Reuter and Alejandro Abadias (Helmholtz-Zentrum Dresden-Rossendorf, Germany) illustrated how novel near-zero waste flowsheets for the treatment of these residues are assessed within the SOCRATES project. Focus of the session was on the primary copper production flowsheet (from rock to metal), in which two scenarios were compared, being production of copper without treatment of wastes and with additional metal recovery from wastes (slags and drosses). The analysis was performed through composing a mass and energy balance of the flowsheet and performing an exergy analysis and life cycle assessment.
Keywords: near-zero waste; recycling; SOCRATES
-
Lecture (others)
Summer school 2018: “To mine or not to mine”, 10.-12.09.2018, Leuven, Belgien
Permalink: https://www.hzdr.de/publications/Publ-28105
The limits of the Circular Economy
Reuter, M. A.
Abstract
-> Circular Economy (CE) - The origins
-> Circular Economy Engineering (CEE)
-> Metallurgical Internet-of-Things (m-IoT) - Comprehensive flowsheets that integrate product design with physical separation and process metallurgy
-> informing Resource Efficiency (iRE)
Fairphone / Plasma furnace for battery smelting
Keywords: Circular Economy; Circular Economy Engineering; Metallurgical Internet-of-Things; Resource Efficiency; Fairphone
-
Lecture (others)
Circular Economy of EV Batteries - Workshop, 24.-25.05.2018, Espoo, Finnland
Permalink: https://www.hzdr.de/publications/Publ-28104
Process Model Based LCA Using HSC Chemnistry Software
Reuter, M. A.; Roine, A.
Abstract
The process industry defines the initial LCA values that are used for raw materials in the manufacturing industry. Plant vs Factory!
If we are talking about the circular economy and the whole value chain, then we must also take into account the effect of the process industry and recycling. This is the only way to minimize total environmental footprints.
Keywords: circular economy; recycling; environmental footprints
-
Lecture (others)
LCA Course SusCriMat - Winterschool, 15.-19.01.2018, Les Diablerets, Schweiz
Permalink: https://www.hzdr.de/publications/Publ-28103
Urban Mining: Dream or Reality – The Limits and opportunities of the Circular Economy
Reuter, M. A.
Abstract
The circular economy will play an important role in shaping a resource-efficient society. Enabling this transformation from a linear to a circular economy requires precise quantification of resource efficiency and thus the economic viability of the system.
Based on the development of simulation tools of classical minerals processing and process metallurgy, the HSC Sim (www.outotec.com) simulation platform could be further developed, gleaning from many academically published works of the authors. This permits the simulation of the circular economy system and to subsequently calculate its resource efficiency. It for example also enables the estimation of a simulation-based recycling index of a product from the "Bill of Material" and "Full Material Declaration". It is a unique methodology for "Design for Recycling".
Figure 1 shows that a key to this simulation is a detailed understanding of the mineralogy as well as the limits of the circular economy system and its many products, materials and systems. In addition, a detailed understanding and quantification of the thermodynamic properties of the system is key to understanding its economics. With this approach, we will show the actual losses of the "circular economy" system and thus illuminate the limits and hence explore in detail if Urban Mining is a dream or economic reality.
Keywords: Fairphone; recycling; circular economy
-
Invited lecture (Conferences)
EuroScience Open Forum, 09.-14.07.2018, Toulouse, Frankreich
Permalink: https://www.hzdr.de/publications/Publ-28102
Cost benefit and environmental life cycle assessment
Rodriguez-Garcia, G.; Molinos-Senante, M.; Gabarron, S.; Alfonsín, C.; Hospido, A.; Corominas, L.; Hernandez-Sancho, F.; Omil, F.; Feijoo, G.; Sala-Garrido, R.; Rodriguez-Roda, I.; Moreira, M. T.
Abstract
This chapter evaluates the economic and environmental implications of MBR using Cost Benefit Analysis (CBA) and Life Cycle Assessment (LCA). A brief introduction to these methodologies and the main developments and achievements when applied to MBR is given before the presentation of two case studies. In the first case study, CBA and LCA were applied for the assessment of seven wastewater treatment plants using MBR and other membrane technologies. The results highlighted the benefits of removal of substances responsible for eutrophication and the relevance of the scale factor regarding electricity use, one of the main environmental and economic costs. In the second case study, LCA alone was applied for the environmental assessment of four novel MBR configurations at pilot-plant scale focusing on the removal of pharmaceutical and personal care products (PPCPs), of which only hormones were found to be relevant in terms of toxicity terms due to their higher concentrations in the influent.
-
Book chapter
Faisal I. Hai, Kazuo Yamamoto, Chung-Hak Lee: Membrane Biological Reactors: Theory, Modeling, Design, Management and Applications to Wastewater Reuse - Second Edition, London (UK): IWA Publishing, 2019, 9781780409160
DOI: 10.2166/9781780409177_0227
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28101
Bubble Generation by Micro-Orifices with Application on Activated Sludge Wastewater Treatment
Mohseni, E.; Herrmann-Heber, R.; Reinecke, S. F.; Hampel, U.
Abstract
We studied the initial gas dispersion performance of diffuser concepts based on micro-orifices and needles with very fine orifice diameters in the range from 30 µm to 200 µm, as such diffusers are currently in discussion for energy-efficient wastewater treatment plants. To evaluate the performance of these micro-orifices, we compared them with industrial rubber membrane diffusers with respect to Sauter mean bubble diameter, pressure drop, frequency of bubble formation, oxygen transfer rate, and power demand for air compression. Our study revealed that, in comparison with rubber membrane diffusers bubbles generated from the micro-orifices transfer up to 82% more oxygen content into the continuous phase at up to 75% less power demand. Moreover, these micro-orifices are able to produce bubble sizes in the same range as the needle diffusers at 60% less pressure drop and 60% higher bubble generation frequency. Therefore, we also expect an improvement in the oxygen transfer coefficient KLa and standard oxygen transfer efficiency SOTE compared to commercial rubber membrane diffusers.
Keywords: Bubble Generation; Micro-orifices; Aeration; Biological Wastewater Treatment; Rubber Membrane Diffusers; Oxygen Transfer
Involved research facilities
- TOPFLOW Facility
Related publications
-
Bubble Generation by Micro-Orifices with Application on Activated Sludge …
ROBIS: 28585 is documented by this (Id 28100) publication
-
Reseach data in the HZDR data repository RODARE
Publication date: 2018-10-23 Closed access
DOI: 10.14278/rodare.63
Versions: 10.14278/rodare.64
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28100
ASTEC model of the THS-15 test facility and first simulation results
Jobst, M.
Abstract
In the framework of the NuWaMa project (Expansion of a German-Czech Collaboration in the Field of Nuclear Waste Management), a research stay at ÚJV Řež (Czech Republic) took place during May 2018 (from 1st of May till 31st of May). The objective of the research stay was the development of a numerical model of the thermal-hydraulic test facility THS-15, which had been put in operation at the ÚJV site in Řež recently in order to investigate phenomena related to ex-vessel cooling for in-vessel retention of molten corium. Assessing the performed experiments with the help of the numerical model is an important contribution to a comprehensive under-standing of the observed phenomena. The current state of the ASTEC model and the first calculation results are presented.
Keywords: VVER; in-vessel melt retention; THS-15 test facility; ASTEC; numerical simulation; critical heat flux
-
Lecture (Conference)
ASTEC Users' Club Meeting, 09.-11.10.2018, Aix-en-Provence, République française
Permalink: https://www.hzdr.de/publications/Publ-28099
Ideal flow regimes of gas spargers: Towards optimal gas bubble generation for biological wastewater treatment
Mohseni, E.; Reinecke, S.; Hampel, U.
Abstract
Gas bubble dispersion is involved within a large number of chemical, biochemical, and other processes. Of particular importance is the dispersion of air bubbles in the activated sludge process in biological wastewater treatment plants. This is an expensive procedure, which is responsible for the largest share of energy bill in the whole WWTP in the range 45% to 75%. The rubber membrane diffusers, which are currently used for aeration in the treatment facilities, offer relatively low standard oxygen transfer efficiency in range of 40-60 %, which is mainly due to generation of large bubble sizes. Among the parameters which influence the system efficiency, bubble size is of great importance, since it directly influences the gas holdup and the bubble residence time. Moreover, bubble size determines the surface area to volume ratio, which affects the volumetric oxygen transfer coefficient and oxygen transfer rate. Bubble formation is mainly studied at openings bigger than 1 mm. Hence, the leverage of sub-millimeter orifices on volume of the final bubble is still not understood. Current endeavor focuses on bubble formation from submerged orifices under constant flow condition. Subsequently a set of experiments is design to capture the bubble generation from small orifices in the range of 20-800 μm diameter. The initial bubble size was measured by means of a high-resolution optical measurement technique. Changes in the mechanism of bubble formation and detachment within the dynamic bubbling regime were monitored and reported over a progressive trend of the volumetric gas flow rate.
Keywords: Bubble Generation; Bubbling Regime; Activated Sludge; Aeration; Biological Wastewater Treatment
Involved research facilities
- TOPFLOW Facility
-
Contribution to proceedings
10th IWA Eastern European Young Water Professionals Conference, 10.-11.05.2018, Zagreb, Croatia
Permalink: https://www.hzdr.de/publications/Publ-28098
Optimization of the Aeration System in Municipal Wastewater Treatment Plant
Mohseni, E.; Reinecke, S.; Hampel, U.
Abstract
Optimal bubble generation for biological aeration process is currently under discussion. We studied bubble formation from a range of solid orifices, from 20 µm to 800 µm, submerged in water under constant flow condition. Scant experimental data is available within this range. We studied the change in the mechanism of bubble formation and detachment at different bubbling regimes. Moreover, the existing theoretical and empirical models for prediction of initial bubble size were evaluated according to the corresponding experimental data. A modified model for prediction of initial bubble size is proposed from the best fit of experimental results. Finally, we introduced another empirical model for prediction of optimal operation condition according to consumption of 95% oxygen uptake from air bubbles in water. In the later model, parameters such as pressure drop of the system, capacity of aeration basin, and available specific aeration area for oxygen transfer are adopted.
Keywords: Bubble Generation; Activated Sludge; Aeration; Biological Wastewater Treatment; Multiphase Flow
Involved research facilities
- TOPFLOW Facility
-
Poster
12th HZDR PhD Seminar, 16.-18.10.2017, Seiffen, Germany
Permalink: https://www.hzdr.de/publications/Publ-28097
Formation and characterization of shallow junctions in GaAs made by ion implantation and ms-range flash lamp annealing
Duan, J.; Wang, M.; Vines, L.; Böttger, R.; Helm, M.; Zeng, Y. J.; Zhou, S.; Prucnal, S.
Abstract
With the demand of aggressive scaling in nanoelectronics, further progress can be realized by integration of high mobility semiconductors, such as III-V compound semiconductors, with complementary metal-oxide-semiconductor (CMOS) technology. In this study we present the formation of shallow n-p and p-n junctions in GaAs utilizing ion implantation of S and Zn, respectively, followed by millisecond-range flash lamp annealing (FLA). The distribution of implanted elements obtained by Secondary Ion Mass Spectrometry (SIMS) shows that the FLA process can effectively suppress the diffusion of dopants. Simultaneously, the ms-range annealing is sufficient to recrystallize implanted layer and to activate the dopants. Formation of p-n and n-p junctions is confirmed by current-voltage characteristics. The on/off-current ratio can reach up to 1.7×107 in the n-GaAs:Zn case.
Keywords: GaAs; shallow junction; ion implantation; flash lamp annealing
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28096) publication
-
Physica Status Solidi (A) 216(2019)8, 1800618
Online First (2018) DOI: 10.1002/pssa.201800618
Cited 3 times in Scopus
Downloads
- Final Draft PDF 902 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28096
Jump Rope Vortex in Liquid Metal Convection
Vogt, T.; Horn, S.; Grannan, A. M.; Aurnou, J. M.
Abstract
The large-scale circulation (LSC) is the key dynamical feature of turbulent thermal convection. It is the underlying structure that shapes the appearance of geo- and astrophysical systems, such as the solar granulation or cloud streets, and the cornerstone of theoretical models. Our laboratory-numerical experiments reveal for the first time that the LSC can perform a fully three-dimensional motion resembling a twirling jump rope.
The discovery of this novel LSC mode implies that the currently accepted paradigm of a quasi-planar oscillating LSC needs to be augmented. Moreover, it provides an important link between studies in confined geometries used in experiments and simulations and the virtually unconfined fluid layers in natural settings where an agglomeration of LSCs forms larger patterns.
Keywords: thermal convection; turbulence; coherent structures; liquid metals
-
Proceedings of the National Academy of Sciences of the United States of America 115(2018)50, 12674-12679
DOI: 10.1073/pnas.1812260115
Cited 56 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28095
Magneto-structural correlations in a systematically disordered B2 lattice
Ehrler, J.; Sanyal, B.; Grenzer, J.; Zhou, S.; Böttger, R.; Wende, H.; Lindner, J.; Faßbender, J.; Leyens, C.; Potzger, K.; Bali, R.
Abstract
Ferromagnetism in certain B2 ordered alloys such as Fe60Al40 can be switched on, and tuned, via antisite disordering of the atomic arrangement. The disordering is accompanied by a 1% increase in the lattice parameter. Here we performed a systematic disordering of B2 Fe60Al40 thin films, and obtained correlations between the order parameter (S), lattice parameter (a0), and the induced saturation magnetization (Ms). As the lattice is gradually disordered, a critical point occurs at 1-S=0.6 and a0=2.91 A, where a sharp increase of the Ms is observed. DFT calculations suggest that below the critical point the system magnetically behaves as it would still be fully ordered, whereas above, it is largely the increase of a0 in the disordered state that determines the Ms. The insights obtained here can be useful for achieving tailored magnetic properties in alloys through disordering.
Keywords: order-disorder; Fe60Al40; phase transition; structural properties; magnetic properties
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28094) publication
-
New Journal of Physics 22(2020), 073004
DOI: 10.1088/1367-2630/ab944a
Cited 16 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28094
The role of open-volume defects in the annihilation of antisites in a B2-ordered alloy
Ehrler, J.; Liedke, M. O.; Cizek, J.; Boucher, R.; Butterling, M.; Zhou, S.; Böttger, R.; Hirschmann, E.; Trinh, T. T.; Wagner, A.; Lindner, J.; Fassbender, J.; Leyens, C.; Potzger, K.; Bali, R.
Abstract
The atomic arrangement in certain B2-ordered alloys, such as Fe60Al40, determines intrinsic material properties like magnetism. Here we have investigated the influence of open-volume defects on the atomic ordering process at elevated temperatures in Fe60Al40 thin films. A dependence of the ordering process on the type and concentration of defects is observed by positron annihilation spectroscopy combined with ab-initio calculations. Comparing the lifetimes of positrons in the alloy for different annealing and irradiation treatments reveals the role of mono-vacancies, triple defects as well as large vacancy clusters: The rate of atomic ordering to the ordered B2 state is increased in the presence of mono-vacancies whereas triple defects and vacancy complexes decrease the ordering rate. Furthermore, an agglomeration of vacancies during annealing to di-vacancies and larger vacancy clusters is observed. The distribution of open-volume defects can be modified in such a way as to control the thermal stability via ion-irradiation and thermal pre-treatments.
Keywords: Order-disorder phenomena; Vacancies; Lattice defects; Reordering; Positron Annihilation Spectroscopy
Involved research facilities
- Radiation Source ELBE DOI: 10.17815/jlsrf-2-58
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
- P-ELBE
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28092) publication
- DOI: 10.17815/jlsrf-2-58 is cited by this (Id 28092) publication
-
Acta Materialia 176(2019), 167-176
DOI: 10.1016/j.actamat.2019.06.037
Cited 14 times in Scopus
Downloads
- Final Draft PDF 4,9 MB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28092
Microstructure, strengthening mechanisms & properties of ODS alloys developed under MatISSE project
Chauhan, C.; Bergner, F.; Etienne, A.; Aktaa, J.; de Carlan, Y.; Heintze, C.; Litvinov, D.; Hernandez-Mayoral, M.; Oñorbe, E.; Radiguet, B.; Ulbricht, A.
Abstract
The invited talk aims at summarizing results from a publication that received the best paper award 2017 of the Journal of Nuclear Materials. Microstructure, strengthening mechanisms and properties of ODS alloys are addressed.
Keywords: ODS alloys; microstructure characterization; strengthening mechanisms
-
Invited lecture (Conferences)
NuMat2018: The Nuclear Materials Conference, 14.-18.10.2018, Seattle, USA
Permalink: https://www.hzdr.de/publications/Publ-28091
High Energy Fast X-ray Tomography
Barthel, F.; Windisch, D.; Hampel, U.
Abstract
Ultrafast X-ray computed tomography with ROFEX scanners has become a common tool for investigations of multiphase phenomena in science and industrial application within recent years. Though being very successful in giving unprecedented insights into dynamic processes, ROFEX scanners yet have some limitations in terms of permissible sizes and density of the investigated objects. Due to the limited penetration capability of X-rays at photon energy of up to 150 keV experimental mock-ups need to be made out of light construction materials and many experimental setups had to be scaled down from their real size to fit into the scanner. Often this limits the transferability of results to larger industrial facilities.
This contribution introduces the new High-Energy Computed Tomography scanner of Rossendorf (HECToR) as the next step towards improved industrial applicability. The facility utilizes a 1 MeV electron accelerator with a continuous beam power of up to 100 kW. The functional principle has been adapted from the ROFEX scanners. HECToR is able to scan objects with a maximum diameter of 400 mm at a temporal resolution of up to 5000 frames per second and with a spatial resolution of 3 mm at best conditions. The paper introduces the scanner concept, its components and presents first dynamic studies on generic two-phase flows in steel vessels. Furthermore, the imaging characteristics are discussed in detail.
Keywords: ROFEX; ultrafast X-ray CT; high energy; HECToR
Involved research facilities
- TOPFLOW Facility
-
Contribution to proceedings
9th World Congress on Industrial Process Tomography, 02.-06.09.2018, Bath, UK
Proceedings of the 9th world cogress on industrial process tomography -
Lecture (Conference)
9th World Congress on Industrial Process Tomography, 02.-06.09.2018, Bath, UK
Permalink: https://www.hzdr.de/publications/Publ-28090
Minor changes in neurocognition and quality of life after proton therapy for brain tumour patients
Dutz, A.; Agolli, L.; Valentini, C.; Bütof, R.; Troost, E. G. C.; Baumann, M.; Lühr, A.; Krause, M.; Löck, S.
Abstract
Purpose: To investigate changes in neurocognitive function and quality of life (QoL) and their association with dosimetric parameters of various brain structures as well as clinical cofactors in adult brain tumour patients following proton beam therapy (PBT).
Material and methods: Sixty-nine adult patients with primary brain tumours who received conventionally fractionated PBT were included in this study. Neurocognitive function according to the Montreal Cognitive Assessment (MoCA) test and QoL according to general EORTC-QLQ-C30 and brain tumour specific QLQ-BN20 questionnaires were scored prospectively at baseline and within 3-month-intervals up to one year after PBT. Dose-volume parameters of the retrospectively contoured structures hippocampus, thalamus, frontal and temporal lobes, amygdala, entire cerebellum, anterior cerebellum, and posterior cerebellum were extracted. Clinical parameters comprised age, sex, diagnosis and WHO grading, tumour volume, prescribed dose, concomitant chemotherapy, tumour resection and administration of corticosteroids. MoCA scores and differences to baseline values at different time points were correlated with self-reported QoL items (Spearman correlation rs), clinical and dosimetric parameters (Mann-Whitney U test, logistic regression). A change of ≥3 points of the MoCA total score compared to baseline was considered clinically relevant. Unless otherwise stated, differences at 3 months after PBT compared to baseline are given.
Results: The MoCA total score remained stable over time for the majority of patients: Less than 10% of the patients had clinically relevant changes at respective time points. The QLQ-C30 items did not change over time. On the QLQ-BN20 symptom scale, significant increases were observed for the items hair loss (p=0.002) and seizure (p<0.042, up to 9 months after PBT). However, future uncertainty decreased significantly (p<0.042). MoCA scores were significantly correlated with self-reported QoL scores. At all time-points, MoCA total score correlated with QLQ-C30 cognitive function (rs: 0.31-0.57) and MoCA language scores with QLQ-BN20 communication deficit (rs: 0.36-0.59).
Clinically relevant differences in the MoCA total score were significantly associated with high dose parameters in the anterior, posterior and entire cerebellum (V55Gy, p<0.05), but not with clinical parameters.
Conclusion: Neurocognitive function and QoL remained stable in the majority of brain tumour patients following PBT. Self-reported QoL was in accordance with the results of the objective MoCA test. Significant associations between dose-volume parameters and clinically relevant neurocognitive changes suggest that further sparing of organs at risk in treatment planning may lead to increased neurocognitive function and QoL for brain tumour patients. New planning constraints for further potential organs at risk, such as the cerebellum [1], should be discussed.
[1] Eekers DBP et al. (2017) Clin Transl Radiat Oncol 8, 22–26.
Keywords: Quality of Life
-
Lecture (Conference)
ESTRO 38, 26.-30.04.2019, Mailand, Italien
DOI: 10.1016/S0167-8140(19)30781-9
Permalink: https://www.hzdr.de/publications/Publ-28089
Review Article: Review of electrohydrodynamical ion sources and their applications to focused ion beam technology
Gierak, J.; Mazarov, P.; Bruchhaus, L.; Jede, R.; Bischoff, L.
Abstract
In this article, the authors review, compare, and discuss the characteristics and applicative potential of a variety of nongallium ion liquid metal ion sources they have developed and successfully applied to nanopatterning. These sources allow generating on-demand ion beams and are promising for extending focused ion beams applications. They detail the operating characteristics of such sources capable to emit metal projectiles ranging from atomic ions with different charge states to polyatomic ions and to large metal clusters having sizes up to a few nanometers. They highlight their interest and relevance to current nanoscience challenges in terms of ultimate patterning or bottom-up nanofabrication capabilities.
Keywords: Liquid Metal Ion Source; nongallium; nanoscience
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28088) publication
-
Journal of Vacuum Science & Technology B 36(2018)6, 06J101-1-06J101-6
DOI: 10.1116/1.5047150
Cited 14 times in Scopus
Downloads
- Final Draft PDF 682 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28088
Forschungsdatenmanagement am Helmholtz-Zentrum Dresden-Rossendorf und am Helmholtz-Zentrum Berlin (RDM@DB)
Konrad, U.; Görzig, H.; Juckeland, G.
Abstract
Das BMBF Verbundprojekt RDMatDB wird im Rahmen der Förderrichtlinie "Erforschung des Managements von Forschungsdaten in ihrem Lebenszyklus“ realisiert. Ziel des Projektes ist es, Forschungsdaten-Management-Lösungen zu entwickeln, die das HZDR und HZB als Betreiber von Infrastrukturen in die Lage versetzen, die sich aus den FAIR-Prinzipien des Datenmanagements ergebenden Anforderungen zu erfüllen. Im dem Vortrag auf der BMBF-Veranstaltung "Forschungsdatenmanagement - künftige Entwicklungen und aktuelle Fragen der Wissenschaft" wird das Projekt und die Perspektiven vorgestellt.
The BMBF joint project RDMatDB of the HZDR and HZB is implemented within the scope of the funding program "Research on the management of research data in its life cycle".
The goal of the project is to develop research data management solutions which the HZDR and HZB consider to meet the requirements of the FAIR data management principles.
The project and perspectives are presented at the BMBF event "Research Data Management - Future Developments and Current Issues of Science".
-
Invited lecture (Conferences)
Forschungsdatenmanagement - künftige Entwicklungen und aktuelle Fragen der Wissenschaft, 17.-18.10.2018, Berlin, Deutschland
DOI: 10.14278/rodare.62
Permalink: https://www.hzdr.de/publications/Publ-28087
Influence of the magnetic field on the stability of the multiferroic conical spin arrangement of Mn0.80Co0.20WO4
Urcelay-Olabarria, I.; Ressouche, E.; Ivanov, V. Y.; Skumryev, V.; Wang, Z.; Skourski, Y.; Balbashov, A. M.; Popov, Y. F.; Vorob'En, G. P.; Qureshi, N.; Garcia-Munoz, J. L.; Mukhin, A. A.
Abstract
The evolution of the low temperature antiferromagnetic conical (characterized by two, commensurate and incommensurate propagation vectors), and the high temperature collinear spin arrangements of the 20% Co-doped MnWO4 multiferroic has been studied in the presence of magnetic field up to 60 T by means of macroscopicmagnetic and pyroelectricmeasurements, and by neutron diffraction experiments in fields up to 12 T on a single crystal. The complete magnetoelectric phase diagrams for magnetic fields along distinct magnetic directions with respect to the spin structure have been constructed up to magnetic field values exceeding those necessary to induce a spin-flip transition into the paramagnetic state. The differences in the topology of the diagrams are discussed. The obtained results might be common for other magnetic materials possessing conical antiferromagnetic structures.
Involved research facilities
- High Magnetic Field Laboratory (HLD)
-
Physical Review B 98(2018), 134430
DOI: 10.1103/PhysRevB.98.134430
Cited 1 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28085
Anomalous Hall effect in Weyl semimetal half-Heusler compounds RPtBi (R = Gd and Nd)
Shekhar, C.; Kumar, N.; Grinenko, V.; Singh, S.; Sarkar, R.; Luetkens, H.; Wu, S.-C.; Zhang, Y.; Komarek, A.; Kampert, E.; Skourski, Y.; Wosnitza, J.; Schnelle, W.; Mccollam, A.; Zeitler, U.; Kübler, J.; Yan, B.; Klauss, H.-H.; Parkin, S. P.; Felser, C.
Abstract
Topological materials ranging from topological insulators to Weyl and Dirac semimetals form one of the most exciting current fields in condensed-matter research. Many half-Heusler compounds, RPtBi (R = rare earth), have been theoretically predicted to be topological semimetals. Among various topological attributes envisaged in RPtBi, topological surface states, chiral anomaly, and planar Hall effect have been observed experimentally. Here, we report an unusual intrinsic anomalous Hall effect (AHE) in the antiferromagnetic Heusler Weyl semimetal compounds GdPtBi and NdPtBi that is observed over a wide temperature range. In particular, GdPtBi exhibits an anomalous Hall conductivity of up to 60 Ω−1·cm−1 and an anomalous Hall angle as large as 23%.Muon spin-resonance (μSR) studies of GdPtBi indicate a sharp antiferromagnetic transition (TN) at 9 K without any noticeable magnetic correlations above TN. Our studies indicate that Weyl points in these half-Heuslers are induced by a magnetic field via exchange splitting of the electronic bands at or near the Fermi energy, which is the source of the chiral anomaly and the AHE.
Involved research facilities
- High Magnetic Field Laboratory (HLD)
-
Proceedings of the National Academy of Sciences of the United States of America 115(2018)37, 9140-9144
DOI: 10.1073/pnas.1810842115
Cited 136 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28084
Low-Temperature Magnetic Hysteresis in Nd(Pr)-Fe-B Nanostructured Alloys with Nd2Fe14B Type Main Phase Composition
Neznakhin, D. S.; Politova, G. A.; Ivanov, L. A.; Volegov, A. S.; Gorbunov, D. I.; Tereshina, I. S.; Kudrevatykh, N. V.
Abstract
Magnetic hysteresis properties of nanostructured industrially manufactured Nd-Fe-B and Pr-Fe-B alloys on the base of a tetragonal Nd2Fe14B (2-14-1) hard magnetic phase (MQP-B, MQP-B+ and MQP-16-7 brands) have been investigated at 4.2 K in magnetic fields up to 58 T. The chemical composition of the alloys given in the certificates was defined more precisely. The grain sizes of the main 2-14-1 phase were determined. The average grain size is much smaller than a critical single domain diameter. Coercivity, remanence magnetization, saturation magnetization and maximal magnetic energy product were determined at 4.2 K and compared with those obtained at room temperature.
Involved research facilities
- High Magnetic Field Laboratory (HLD)
-
Defect and Diffusion Forum 386(2018), 125-130
DOI: 10.4028/www.scientific.net/DDF.386.125
ISSN: 1662-9507
Cited 6 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28083
Millisecond Dynamics of the Magnetocaloric Effect in a First- and Second-Order Phase Transition Material
Döntgen, J.; Rudolph, J.; Gottschall, T.; Gutfleisch, O.; Hägele, D.
Abstract
The millisecond-dynamics of the magnetocaloric effect in Gd and La-Fe-Si-Mn, which exhibit first- and second-order phase-transitions, respectively, are investigated. Direct measurements of the adiabatic temperature change ΔT are obtained from modulation infrared thermometry with field-cycling frequencies exceeding 1 kHz at amplitudes of up to 45 mT. The peak amplitude of ΔT(T) shows a dependence on sample thickness and decreases with increasing modulation frequency for both materials despite a frequency independent susceptibility of Gd. The adiabatic DT depends quadratically on the external field for Gd while La-Fe-Si-Mn shows a peculiar bucket-shaped curve for temperatures below the peak maximum. A comparative study of non-caloric samples shows that dissipative heating by eddy currents or magnetic hysteresis does not explain the observed behavior. The transient ΔT(t) instead suggests a mechanism involving strong temperature gradients at the ferromagnetic–paramagnetic boundaries and underlines the importance of further dynamical studies for a fundamental understanding of the magnetocaloric effect in first-order materials.
Involved research facilities
- High Magnetic Field Laboratory (HLD)
-
Energy Technology (2018)6, 1470-1477
DOI: 10.1002/ente.201800145
Cited 11 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28082
Molecular interaction of fungi with uranium
Wollenberg, A.; Merroun, M.; Günther, A.; Raff, J.; Stumpf, T.
Abstract
The radioactive and toxic element uranium is mined in large quantities, for example for industrial or research purposes, and subsequently stored as waste. This increases the risk of anthropogenic release into the environment, where it can enter the groundwater and thus the food chain through leaching and migration. However, the surrounding microbial community can influence the migration behavior of uranium. An important part of this community are fungi that can interact with uranium through various processes such as sorption, accumulation or mineralization. These processes can restrict the mobility of uranium and prevent migration into the waterways and subsequently the food chain.
The aim of this study is to investigate the potential of fungi for precautionary radiation protection methods or even bioremediation procedures for contaminated soils. In assessing the suitability of fungi, the first task is to investigate the molecular interactions with uranium in detail. For this purpose, binding experiments with the two fungi Schizophyllum commune and Leucoagaricus naucinus are conducted in various media to determine the influence of the environment on the uranium binding behavior of fungi. Time-resolved laser-induced fluorescence spectroscopy was used to investigate the speciation of fungal bound uranium. Furthermore, the location of bound uranium was determined using transmission electron microscopy with energy dispersive X-ray spectroscopy. In addition, microcosm experiments were carried out with soil to investigate the interactions of fungi with uranium under natural conditions.
The results so far show that the uranium binding of the fungi is very different but largely independent of the surrounding medium. This suggests that the interactions are mainly determined by the biochemistry of fungi.
Keywords: Fungi; Uranium; Interaction
-
Poster
International conference Uranium biogeochemistry, 21.-26.10.2018, Ascona, Switzerland
Permalink: https://www.hzdr.de/publications/Publ-28081
Optimal beam loading in a nanocoulomb-class laser wakefield accelerator
Abstract
Laser plasma wakefield accelerators have seen tremendous progress in the last years, now capable of producing electron beams in the GeV energy range. The inherent few-femtoseconds short bunch duration of these accelerators leads to ultra-high peak-currents. Reducing the energy spread found in these accelerators, while scaling their output to hundreds of kiloampere peak current would stimulate the next generation of radiation sources covering high-field THz, high-brightness X-ray and -ray sources, compact free-electron lasers and laboratory-size beam-driven plasma accelerators. At such high currents, an accelerator operates in the beam loaded regime where the accelerating field is strongly modified by the self-fields of the injected bunch, potentially deteriorating key beam parameters. However, if appropriately controlled, the beam loading effect can be employed to improve the accelerator’s performance, specifically to reduce the energy spread.
In this thesis the beam-loading effect is systematically studied at a quasi-monoenergetic nanocoulomb-class laser wakefield accelerator. For this purpose, a tailored scheme of the self-truncated ionisation injection process is introduced for the non-linear bubble regime. This scheme facilitates stable and tunable injection of high-charge electron bunches within a short and limited time-frame, ensuring low energy spread right after injection. Employing a three millimetres gas-jet acceleration medium and a moderate 150 TW short pulse laser system as driver, unprecedented charges of up to 0.5 nC within a quasi-monoenergetic peak and energies of ~0.5 GeV are achieved. Studying the beam loading mechanism, it is demonstrated that at the optimal loading condition, i.e. at a specific amount of injected charge, performance of the accelerator is optimised with a minimisation of the energy spread. At a relative energy spread of only 15%, the associated peak current is around 10 kA, while scaling this scheme to operate with a petawatt driver laser promises peak-currents up to 100 kA.
Keywords: beam loading; plasma acceleration; electron acceleration; LWFA; laser wakefield acceleration; LPA
-
Wissenschaftlich-Technische Berichte / Helmholtz-Zentrum Dresden-Rossendorf; HZDR-093 2018
ISSN: 2191-8708, eISSN: 2191-8716 -
Lecture (Conference)
Laser-Plasma Accelerator Workshop (LPAW) 2019, 05.-10.05.2019, Split, Republika Hrvatska
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28080
Experimental investigation of bubble breakup in bubble chains rising in a liquid metal
Keplinger, O.; Shevchenko, N.; Eckert, S.
Abstract
The process of bubble breakup in a liquid metal was studied by X-ray radiography and high-speed video imaging. Argon gas bubbles were injected through a single orifice at the bottom of a rectangular vessel filled with the eutectic GaInSn alloy. Moderate gas flow rates were applied at isothermal conditions resulting in the formation of bubble chains. The bubble breakup events observed in the chosen experimental geometry were mainly initiated by bubble collisions or by the effect of local shear flow. We present experimental results accompanied by statistical analysis of the bubble breakup frequency, number of daughter bubbles and their size distribution, bubble velocities before and after the breakup process for a broad range of Argon gas flow rates.
Keywords: Liquid metal; Two-phase flow; Bubble chain; Bubble breakup; X-ray radiography
-
International Journal of Multiphase Flow 116(2019), 39-50
DOI: 10.1016/j.ijmultiphaseflow.2019.03.027
ISSN: 0301-9322
Cited 30 times in Scopus
Downloads
- Final Draft PDF 2,1 MB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28079
Bubble motion in liquid metal with and without a magnetic field
Keplinger, O.; Shevchenko, N.; Eckert, S.
Abstract
Liquid metal two-phase flows are widely used in metallurgical processes. For example Argon gas bubbles are injected into a bulk liquid to enhance mixing and homogenization of the melt. Also the Argon gas bubbles remove undesired inclusions by transporting them towards the slag layer at the free surface improving the melt cleanliness. This process is highly dependent both on the properties of the inclusions and on the size and surface characteristics of the dispersed gas phase. The bubble size distribution and interfacial area inside the melt are strongly influenced by the bubble coalescence and breakup which are controlled by the turbulent flow that develops inside the melt. In order to improve the final product quality an external magnetic field is applied to control the fluid motion and bubble behavior. Despite an increasing number of numerical and experimental studies on bubble rise in liquid metals only few experimental data on bubble rise in the presence of a magnetic field exists. These works are mainly focused on investigations of single bubbles in the absence of turbulence. Since bubble rising dynamics in a bubble chain or cluster is often affected by bubble-wake and bubble-bubble interactions direct investigation of bubble chains and clusters rising in liquid metals under the influence of magnetic field becomes crucial.
Bubble chain ascending in non-transparent liquid metal under the influence of magnetic field was examined by X-ray radiography through high-speed video imaging. The Argon gas bubbles were injected through a single bevel-shaped nozzle positioned in the middle at the bottom of a flat Plexiglas vessel. The vessel was filled with eutectic GaInSn alloy at isothermal conditions. We present experimental results accompanied by statistical analysis of the bubble size distribution, shape deformation, velocities, etc. for Argon gas flow rates lying in the range 150-1200 cm³ /min. In general, the increase of the gas flow rate leads to increase in bubble size and velocity. In turn, the velocity shows periodic oscillations related to the zig-zag motion of the bubbles. Both the velocity and oscillation amplitude decrease with increasing the magnetic field strength. Bubble pairing regime appears at higher gas flow rates for bubbles moving in the magnetic field: at 400 cm³ /min against 300 cm³ /min for bubbles moving without magnetic field. Therefore, the appearance of bubble coalescence and breakup is also shifted to higher gas flow rates. The integral gas distribution for bubbles moving without magnetic field is symmetrical due to the bubble chain oscillation in the observation plane. In contrast, the bubbles move almost along the same bubble path in a magnetic field leading to the asymmetry of gas distribution. Further image processing reveals that the major axis of the ellipses fitted to the bubbles at moderate gas flow rates (≤400 cm³ /min) is aligned almost parallel to the bottom of the vessel in the presence of the highest magnetic field used in our experiments (for B ~270 mT). Also the bubble shape oscillations are damped with increasing magnetic field at moderate gas flow rates (≤400 cm³ /min) when the turbulence is strongly suppressed.
Keywords: Liquid metal; Two-phase flow; Bubble chain; Magnetic field; X-ray radiography
-
Poster
16th Multiphase Flow Conference & Short Course, 13.-16.11.2018, Helmholtz-Zentrum Dresden-Rossendorf, Germany
Permalink: https://www.hzdr.de/publications/Publ-28078
Influence of beamline and scanning magnets on the magnetic fringe field of a proton PBS nozzle
Gantz, S.; Riemann, L.; Smeets, J.; Pawelke, J.; Hoffmann, A.
Abstract
Purpose/Objective
Real-time soft-tissue image guidance is a desirable concept to improve the targeting precision of proton therapy. In 2017, the first prototype of an MR-integrated proton therapy setup was realised at our horizontal fixed research beamline. Moving towards a clinical application this in-beam MRI system shall be transferred to a pencil beam scanning (PBS) research beamline that provides volumetric dose spot delivery. A magnetic survey was performed to quantify the effects of beamline and scanning magnets on the environmental magnetic field.
Material and Methods
The magnetic fringe field at the PBS nozzle was measured by a tri-axial Hall-probe magnetometer (THM 1176-LF, Metrolab) at two positions: (P1) at a lateral position 700 mm from the center of the scanning magnets, and (P2) at the planned magnetic isocenter of the in-beam MR scanner, which is 2270 mm downstream from the last scanning magnet on the beam central axis. Measurement point P1 was chosen to be able to differentiate between magnetic field changes due to energizing the beamline (quadrupole) and the scanning (dipole) magnets. Two maps of PBS spots were delivered by the PBS nozzle: (M1) consisted of 16 energy layers ranging from 70 to 230 MeV (steps of 10 MeV) with a single central spot for each layer, and (M2) used a single energy of 200 MeV with a field size of (200 x 200) mm2 and a step width of 5 mm, resulting in 41x41 spots. The magnets were energized to deliver maps M1 and M2 to study the magnetic field effects of changing beam energies and changing spot positions, respectively, but no beam was transported for radiation protection reasons. The Hall-probe logged all 3 magnetic field components during spot map scanning by Labview-based software (THM1176 v4.0, Metrolab) at a sample frequency of 10 Hz.
Results
For position P1, the magnetic field changes due to setting the beamline magnets to the 16 energy levels, as well as operating the scanning magnets to the 41 spot rows can be clearly observed (Fig. 1), with maximum amplitudes |ΔBmax| of up to 28.6 µT and 55.3 µT, for maps M1 and M2, respectively. For position P2, the |ΔBmax| was 9.0 µT and 10.1 µT for M1 and M2, respectively. This translates into an off-resonance frequency shift of 383.4 Hz and 430.3 Hz for 1H-MR imaging, respectively.
Conclusion
Significant changes in the environmental magnetic fringe field of a proton PBS beamline are measurable due to the operation of its beamline and scanning magnets. These changes translate into off-resonance frequency shifts that could cause significant MR image shifts in the frequency encoding direction. This needs to be confirmed by magnetic field mapping around the magnetic isocenter of the MRI scanner once it has been installed at the PBS nozzle. To counteract this effect, either the image shifts need to be compensated for or the PBS nozzle needs to be magnetically shielded from the MRI scanner.
-
Poster
ESTRO 38, 26.-30.04.2019, Milano, Italy
Permalink: https://www.hzdr.de/publications/Publ-28077
Deep-learning based estimation of loco-regional control for patients with locally advanced HNSCC
Starke, S.; Leger, S.; Zwanenburg, A.; Pilz, K.; Lohaus, F.; Linge, A.; Zöphel, K.; Kotzerke, J.; Schreiber, A.; Tinhofer, I.; Budach, V.; Stuschke, M.; Balermpas, P.; Rödel, C.; Ganswindt, U.; Belka, C.; Pigorsch, S.; Combs, S. E.; Mönnich, D.; Zips, D.; Krause, M.; Baumann, M.; Richter, C.; Troost, E. G. C.; Löck, S.
Abstract
Purpose/Objective: In order to improve radiotherapy outcomes, further treatment personalisation is considered beneficial. Radiomics analyses aim to predict treatment outcomes based on medical imaging data. Commonly, hand-crafted imaging features are used that require domain knowledge and further feature selection steps. This may cause relevant information to be lost. Deep convolutional neural networks (CNNs) on the other hand can act as automatic feature detectors and are able to learn highly nonlinear relationships directly from imaging data, thus addressing the drawbacks of conventional radiomics approaches and enabling end-to-end learning. We investigated whether CNNs are capable of quantifying loco-regional tumour control (LRC) based on CT imaging of patients with locally advanced head and neck squamous cell carcinoma (HNSCC).
Material/Methods: A multicentre cohort consisting of 302 patients with locally advanced HNSCC was collected and divided into an exploratory and a validation cohort (207 and 95 patients, respectively). All patients received a non-contrast-enhanced CT scan for treatment-planning and were treated by primary radio(chemo)therapy. 9725 transverse CT slices from the exploratory cohort were used to train a CNN with eight convolutional layers. For every patient (with one exception) we used 23 CT slices cranial and caudal of the slice with the largest tumour area, resulting in 47 slices per patient. Discriminative performance was evaluated using 4465 slices of the validation data set. The hazard of loco-regional recurrence was estimated by the CNN maximising the likelihood of the Cox proportional hazards model, which allows for incorporation of nonlinear relationships between the imaging features and the hazard prediction. The final hazard for every patient was obtained by averaging the results of the individual slices. The prognostic value of the model was evaluated by the concordance index (C-Index). Patients were stratified into groups of low and high risk of recurrence using the median hazard in the exploratory cohort.
Results: The validation of our CNN model revealed a C-Index of 0.68 (95% confidence interval: 0.57-0.79) for the prognosis of LRC. The estimated hazards were used to stratify patients into two risk groups. LRC significantly differed between these groups, both in the exploratory and the validation cohort (log-rank p<0.0001 and p=0.0005, respectively). Compared to previously published results with an average validation C-Index of 0.62 based on conventional radiomics [1], prognostic performance was slightly improved.
Conclusions: We showed that CNNs are capable of automatically stratifying patients with locally advanced HNSCC into high and low-risk groups for loco-regional tumour recurrence. The obtained results suggest that deep-learning based approaches can become useful for non-invasively evaluating individual recurrence risks encouraging future research in this area.
[1] Leger et al. Sci Rep 7: 13206 (2017).
Keywords: Deep-learning; HNSCC; loco-regional control; Radiomics
-
Lecture (Conference)
ESTRO 38, 26.-30.04.2019, Mailand, Italien
Permalink: https://www.hzdr.de/publications/Publ-28076
Highly compliant planar Hall effect sensor with sub 200 nT sensitivity
Granell, P.; Wang, G.; Canon Bermudez, G. S.; Kosub, T.; Golmar, F.; Steren, L.; Fassbender, J.; Makarov, D.
Abstract
Being a facet of flexible electronics, mechanically reshapeable magnetic field sensorics enable novel device ideas for soft robotics, interactive devices for virtual- and augmented reality and point of care diagnostics. These applications demand mechanically compliant yet robust sensor devices revealing high sensitivity to small magnetic fields. To push the detection limit of highly compliant and linear magnetic field sensors to be in the sub-µT range, we explore a new fundamental concept for magnetic field sensing, namely the planar Hall effect in magnetic thin films. With their remarkable bendability down to 1 mm, these compliant planar Hall effect sensors allow for an efficient detection of magnetic fields as small as 20 nT. We demonstrate the application potential of these devices as a direction (angle) as well as proximity (distance) sensors of tiny magnetic fields emanating from magnetically functionalized objects. With their intrinsic linearity and simplicity of fabrication, these compliant planar Hall effect sensors have the potential to become a standard solution for low field applications of shapeable magnetoelectronics in point of care applications and on-skin interactive electronics.
Keywords: Flexible electronics; shapeable magnetoelectronics; planar Hall effect
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28075) publication
-
npj Flexible electronics 3(2019), 3
DOI: 10.1038/s41528-018-0046-9
Cited 51 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28075
Electronic-skin compasses for geomagnetic field driven artificial magnetoception and interactive electronics
Cañón Bermúdez, G. S.; Fuchs, H.; Bischoff, L.; Fassbender, J.; Makarov, D.
Abstract
Magnetoception is the ability to detect and respond to magnetic fields that allows certain organisms to orientate themselves with respect to the Earth’s magnetic field for navigation purposes. The development of an artificial magnetoception, which is based solely on an interaction with geomagnetic fields and can be used by humans, has, however, proved challenging. Here we report a compliant and mechanically robust electronic-skin compass system that allows a person to orient with respect to Earth’s magnetic field. The compass is fabricated on 6-μm-thin polymeric foils and accommodates magnetic field sensors based on the anisotropic magnetoresistance effect. The response of these compliant sensors is tailored to be linear and possess maximum sensitivity around the earth’s magnetic field by using geometric conditioning. Our approach can also be a used to create interactive devices for virtual and augmented reality applications, and we illustrate the potential of this by using our electronic-skin compass in the touchless-control of virtual units in a game engine.
Keywords: Flexible electronics; magnetic sensors; geomagnetic field; magnetoception; virtual reality
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28074) publication
-
Nature Electronics 1(2018)11, 589-595
DOI: 10.1038/s41928-018-0161-6
Cited 93 times in Scopus
Downloads
- Final Draft PDF 259 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28074
Improving landslide susceptibility mapping using morphometric features in the Mawat area, Kurdistan Region, NE Iraq: Comparison of different statistical models
Othman, A. A.; Gloaguen, R.; Andreani, L.; Rahnama, M.
Abstract
Susceptibility mapping provides information about vulnerable locations and thus helps to potentially decrease infrastructure damage due to mass wasting. During the past decades, expansion of settlements into areas prone to landslides in Iraq has highlighted the importance of accurate landslide susceptibility studies. The main goal of this research is to implement selected morphometric parameters to improve prediction of landslide susceptibility in the Zagros Mountain region. We used the Mawat area, in the Kurdistan Region (NE Iraq) to test the added value of morphometric indicators. Sixteen morphometric factors, mainly derived from a Digital Elevation Model (DEM), extracted using the stereo-ability of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) satellite, as well as geological and environmental predictive factors, were appraised. We evaluated and compared Frequency Ratio (FR), Weight of Evidence (WOE), Logistic Regression (LR) and Probit Regression (PR) approaches in combination with morphometric indices to determine the Landslide Susceptibility (LS). The areas under the curve (AUC) of the Prediction Rate Curve (PRC), Relative landslide density Index (R index), and True Positive Percentage (TPP) for the four models show that all models perform similarly, and the focus should be on careful selection of the predictive factors, which is far more important than the methods used. Results indicate that lithology and slope aspects are the more dominant factors that lead to detect possible occurrence of landslides. Furthermore, this work demonstrates that the hypsometric integral performs better than the commonly used slope curvature as a predictor and thus increases the prediction accuracy of the susceptibility map. We argue that the use of adequate morphometric parameters can increase the efficiency of the LS mapping in other regions of the world.
Keywords: Frequency ratio; Weight of evidence; Logistic regression; Probit regression; Landslide susceptibility (LS); Iraq
-
Geomorphology 319(2018), 147-160
DOI: 10.1016/j.geomorph.2018.07.018
Cited 50 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28073
Beyond a phenomenological description of magnetostriction
Reid, A. H.; Shen, X.; Maldonado, P.; Chase, T.; Jal, E.; Granitzka, P. W.; Carva, K.; Li, R. K.; Li, J.; Wu, L.; Vecchione, T.; Liu, T.; Chen, Z.; Higley, D. J.; Hartmann, N.; Coffee, R.; Wu, J.; Dakovski, G. L.; Schlotter, W. F.; Ohldag, H.; Takahashi, Y. K.; Mehta, V.; Hellwig, O.; Fry, A.; Zhu, Y.; Cao, J.; Fullerton, E. E.; Stöhr, J.; Oppeneer, P. M.; Wang, X. J.; Dürr, H. A.
Abstract
Magnetostriction, the strain induced by a change in magnetization, is a universal effect in magnetic materials. Owing to the difficulty in unraveling its microscopic origin, it has been largely treated phenomenologically. Here, we show how the source of magnetostriction—the underlying magnetoelastic stress—can be separated in the time domain, opening the door for an atomistic understanding. X-ray and electron diffraction are used to separate the sub-picosecond spin and lattice responses of FePt nanoparticles. Following excitation with a 50-fs laser pulse, time-resolved X-ray diffraction demonstrates that magnetic order is lost within the nanoparticles with a time constant of 146 fs. Ultrafast electron diffraction reveals that this demagnetization is followed by an anisotropic, three-dimensional lattice motion. Analysis of the size, speed, and symmetry of the lattice motion, together with ab initio calculations accounting for the stresses due to electrons and phonons, allow us to reveal the magnetoelastic stress generated by demagnetization.
-
Nature Communications 9(2018), 388
DOI: 10.1038/s41467-017-02730-7
Cited 56 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28072
Measuring the thermal properties of anisotropic materials using beam-offset frequency domain thermoreflectance
Rahman, M.; Shahzadeh, M.; Braeuninger-Weimer, P.; Hofmann, S.; Hellwig, O.; Pisana, S.
Abstract
Thermoreflectance techniques have become popular to measure the thermal properties of thin films such as thermal conductivity and thermal boundary conductance (TBC). Varying the focused spot sizes of the beams increases the sensitivity to in-plane heat transport, enabling the characterization of thermally anisotropic materials. However, this requires realignment of the optics after each spot size adjustment. Offsetting the probe beam with respect to the pump beam and modulating over a wide range of frequencies (5 kHz to 50 MHz) yield better sensitivity to the thermophysical properties of anisotropic materials without varying the spot sizes. We demonstrate how beam-offset frequency domain thermoreflectance can be used to measure the in- and out-of-plane thermal conductivity as well as the TBC simultaneously from a single data set by working at reduced spot sizes. Lowering the laser spot size allows us to detect signals over a wide range of frequencies and use larger beam offsets, thanks to the increase in the thermoreflectance signal. We measure the anisotropic thermal properties of a range of materials, including single layer Graphene on SiO2, which is of interest for novel electronic devices.
Keywords: Graphene; Thermal conductivity; Optical metrology; Metal oxides; Frequency domain thermoreflectance
-
Journal of Applied Physics 123(2018), 245110
DOI: 10.1063/1.5033966
Cited 19 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28071
Chemical-vapor deposited ultra-fast diamond detectors for temporal measurements of ion bunches
Jahn, D.; Träger, M.; Kis, M.; Brabetz, C.; Schumacher, D.; Blaević, A.; Ciobanu, M.; Pomorski, M.; Bonnes, U.; Busold, S.; Kroll, F.; Brack, F.-E.; Schramm, U.; Roth, M.
Abstract
This article reports on the development of thin diamond detectors and their characterization for their application in temporal profile measurements of subnanosecond ion bunches. Two types of diamonds were used: a 20 μm thin polycrystalline chemical vapor deposited (CVD) diamond and a membrane with a thickness of (5 ± 1) μm etched out of a single crystal (sc) CVD diamond. The combination of a small detector electrode and an impedance matched signal outlet leads to excellent time response properties with a signal pulse resolution (FWHM) of τ = (113 ± 11) ps. Such a fast diamond detector is a perfect device for the time of flight measurements of MeV ions with bunch durations in the subnanosecond regime. The scCVD diamond membrane detector was successfully implemented within the framework of the laser ion generation handling and transport project, in which ion beams are accelerated via a laser-driven source and shaped with conventional accelerator technology. The detector was used to measure subnanosecond proton bunches with an intensity of 10^8 protons per bunch
-
Review of Scientific Instruments 89(2018)9, 093304
DOI: 10.1063/1.5048667
Cited 4 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28070
A multicaloric cooling cycle that exploits thermal hysteresis
Gottschall, T.; Gràcia-Condal, A.; Fries, M.; Taubel, A.; Pfeuffer, L.; Manosa, L.; Planes, A.; Skokov, K. P.; Gutfleisch, O.
Abstract
The giant magnetocaloric effect, in which large thermal changes are induced in a material on the application of a magnetic field, can be used for refrigeration applications, such as the cooling of systems from a small to a relatively large scale. However, commercial uptake is limited. We propose an approach to magnetic cooling that rejects the conventional idea that the hysteresis inherent in magnetostructural phase-change materials must be minimized to maximize the reversible magnetocaloric effect. Instead, we introduce a second stimulus, uniaxial stress, so that we can exploit the hysteresis. This allows us to lock-in the ferromagnetic phase as the magnetizing field is removed, which drastically removes the volume of the magnetic field source and so reduces the amount of expensive Nd–Fe–B permanent magnets needed for a magnetic refrigerator. In addition, the mass ratio between the magnetocaloric material and the permanent magnet can be increased, which allows scaling of the cooling power of a device simply by increasing the refrigerant body. The technical feasibility of this hysteresis-positive approach is demonstrated using Ni–Mn–In Heusler alloys. Our study could lead to an enhanced usage of the giant magnetocaloric effect in commercial applications.
Involved research facilities
- High Magnetic Field Laboratory (HLD)
-
Nature Materials 17(2018), 929-934
DOI: 10.1038/s41563-018-0166-6
Cited 169 times in Scopus
Downloads
- Final Draft PDF 5 MB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28069
High-frequency measurements of thermophysical properties of thin films using a modified broad-band frequency domain thermoreflectance approach
Shahzadeh, M.; Rahman, M.; Hellwig, O.; Pisana, S.
Abstract
In this work, we present the implementation of a new method to perform high-frequency thermoreflectance measurements on thin films. The so-called differential broad-band frequency domain thermoreflectance method follows broad-band frequency domain thermoreflectance developed previously [Regner et al., Rev. Sci. Instrum. 84 (6), 064901 (2013)], without the use of expensive electro-optic modulators. Two techniques are introduced to recover the thermal phase of interestand to separate it from the unwanted instrumental contributions to the recorded phase. Measuring a differential thermal phase by either varying the spot size or offsetting the pump and probe beams, the thermophysical properties of materials can be extracted. This approach enables the study of nanoscale heat transport where non-equilibrium phenomena are dominating.
Keywords: Thin films; Materials properties; Thermal conductivity; Optical metrology; Frequency domain thermoreflectance
-
Review of Scientific Instruments 89(2018), 084905
DOI: 10.1063/1.5037117
Cited 5 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28068
Single-crystal neutron diffraction study of hexagonal multiferroic YbMnO3 under a magnetic field
Chattopadhyay, S.; Simonet, V.; Skumryev, V.; Mukhin, A. A.; Ivanov, V. Y.; Aroyo, M. I.; Dimitrov, D. Z.; Gospodinov, M.; Ressouche, E.
Abstract
We report a single-crystal neutron diffraction study of the magnetic structure of the multiferroic compound YbMnO3, a member of the hexagonal manganite family, in zero field and under a magnetic field applied along the c axis. We propose a scenario for the zero-field magnetic ordering and for the field-induced magnetic reorientation of the Mn atom and of the two Yb atoms on distinct crystallographic sites, compatible with the macroscopic measurements, as well as with previous powder neutron diffraction experiments and results from other techniques (optical second-harmonic generation and Mössbauer spectroscopy). Our study should contribute to settling some debated issues regarding the magnetic properties of thismaterial as part of a broader investigation of the entire hexagonal RMnO3 (R = Dy, Ho, Er, Tm, Yb, Lu, Y) family.
Involved research facilities
- High Magnetic Field Laboratory (HLD)
-
Physical Review B 98(2018), 134413
DOI: 10.1103/PhysRevB.98.134413
Cited 8 times in Scopus
Downloads
- Open Access Version from arxiv.org
- Secondary publication expected
Permalink: https://www.hzdr.de/publications/Publ-28067
Ultrafast laser generated strain in granular and continuous FePt thin films
von Reppert, A.; Willig, L.; Pudell, J.-E.; Rössle, M.; Leitenberger, W.; Herzog, M.; Ganss, F.; Hellwig, O.; Bargheer, M.
Abstract
We employ ultrafast X-ray diffraction to compare the lattice dynamics of laser-excited continuous and granular FePt films on MgO (100) substrates. Contrary to recent results on free-standing granular films, we observe in both cases a pronounced and long-lasting out-of-plane expansion. We attribute this discrepancy to the in-plane expansion, which is suppressed by symmetry in continuous films. Granular films on substrates are less constrained and already show a reduced out-of-plane contraction. Via the Poisson effect, out-of-plane contractions drive in-plane expansion and vice versa. Consistently, the granular film exhibits a short-lived out-of-plane contraction driven by ultrafast demagnetization which is followed by a reduced and delayed expansion. From the acoustic reflections of the observed strain waves at the film-substrate interface, we extract a 13% reduction of the elastic constants in thin 10 nm FePt films compared to bulk-like samples.
Keywords: Epitaxy; Poisson's ratio; Magnetic devices; Magnetic materials; Stress strain relations; Thin films; Ultrafast X-ray diffraction; Lattice dynamics; Phonons; Elastic modulus
-
Applied Physics Letters 113(2018), 123101
DOI: 10.1063/1.5050234
Cited 16 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28066
Detectability and structural stability of a liquid fiducial marker in fresh ex vivo pancreas cancer resection specimen on CT and 3T MRI
Schneider, S.; Aust, D.; Brückner, S.; Welsch, T.; Hampe, J.; Troost, E.; Hoffmann, A.
Abstract
Objectives
The aim of this study was to test the visibility of a new liquid fiducial marker injected in ex vivo pancreas tissue on magnetic resonance imaging (MRI) and computed tomography (CT). Furthermore, its injection performance using different needle sizes was investigated as well as its structural stability after fixation in formaldehyde.
Material and Methods
Liquid fiducial markers with a volume of 20-100 µL were injected into the freshly resected pancreas of three patients (two males age 69 and 72, one female age 68) with suspected adenocarcinoma of the pancreatic head. Injection was performed under X-ray guidance using a high precision unit dose injector with different needle sizes (18G, 22G, 25G). While cooled on ice, the specimens were scanned on MRI and CT with routine clinical sequences. Signal threshold based segmentation was performed manually on CT. The marker volume visible on CT was compared to the actually injected volume as a measure of potential marker backflow. After rigid registration of the MR images to the CT data set, marker detectability was assessed by searching for the corresponding hypointense structure in the respective segmentation.
Results
Markers with a volume of ≥ 20 µL were easily detected as hyperintense structures on X-ray and CT. In clinically used T1- and T2-weighted 3T MRI sequences, all marker sizes ranging from 20µL – 100µL were visible as hypointensity. Since most markers were non-spherical however, MRI visibility was relatively poor and their differentiation from hypointensities caused by air cavities or surgical clips was challenging and only feasible with a reference CT. Marker backflow was observed when injected with an 18G needle, which was prevented by injection using a smaller 22G and 25G needle. The marker was stable after 24h fixation in formaldehyde where only small volume degradations were observed (6.6±13.0%) and with the exception of one instance no wash out occurred.
Conclusion
The liquid fiducial marker with injected volumes of 20µL – 100µL, injected in an ex vivo pancreatic cancer resection specimen, was visible as hyperintensity on kV X-ray, CT and hypointensity on MRI and stable over a period of 24 hours in formaldehyde. Since most injected markers were non-spherical, a marker size of ≥50µL is recommended for the clinically used MRI sequences. Most likely, in vivo marker injection will result in more spherical forms due to persisting metabolism, and this in turn will enhance MRI visibility in an hyper intense structure.
Keywords: Liquid fiducial marker; pancreatic adenocarcinoma; MRI visibility; ex vivo
-
Strahlentherapie und Onkologie 195(2019)8, 756-763
DOI: 10.1007/s00066-019-01474-1
Cited 5 times in Scopus
Downloads
- Final Draft PDF 784 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28065
Comparison of respiratory motion management by means of three abdominal corsets for particle therapy
Schneider, S.; Dolde, K.; Alimusaj, M.; Fluegel, B.; Hoffmann, A.; Pfaffenberger, A.
Abstract
Purpose/Objective:
Particle therapy (PT) has the potential of improving the outcome in radiotherapy (RT) due to its inverse dose profile and the superior sparing of healthy tissues surrounding the target volume compared to photon therapy. However, PT is strongly susceptible to anatomical changes, and especially for the treatment of abdominal tumours, strategies for motion management are required.
The purpose of this study was to investigate and compare the potential usability of three different abdominal corsets in PT by measuring their water equivalent ratio (WER) in proton therapy as well as by analysing their effect on the respiration-induced motion of the pancreas.
Material/Methods:
The corsets differed in terms of geometry (thickness of 2.5mm – 24mm), material (polyethylene (PE) vs. polyurethane (PU)) as well as regarding the method of construction (patient individual vs. patient independent). A healthy volunteer was scanned on a 1.5T MR scanner (Magnetom Aera, Siemens Healthineers) on two consecutive days while he was wearing each of the three respective corsets and without him wearing a corset for reference. A gradient echo sequences with radial golden angel acquisition was used and reconstructed to a 4D data set with 20 phases. The pancreas was delineated in max exhale and max inhale phase using the open-source software MITK (Fig. 1). The centre of mass was calculated as a surrogate for the respiratory motion of the pancreas in each of the four scenarios for both days.
After acquiring CT scans of the three corsets for assessment of material homogeneity and regularity of material thickness, WER measurements were performed at two different proton energies (150MeV, 200MeV) using a multi-layer ionization chamber (Giraffe, IBA Dosimetry) to measure the shift of the single beam Bragg Peak after penetrating the corset sample.
Results:
All three abdominal corsets led to reduced pancreatic motion, and the effect was largest in inferior-superior direction (Table 1). The CT revealed a perfectly homogeneous material for the two PE corsets with a constant thickness of 2.5±0.1mm and 4.9±0.1mm. In case of the PU corset the material was inhomogeneous with air inclusions throughout the whole corset. Furthermore, its thickness varied between 8.0-24.2mm in the relevant region. The WER of the two polyethylene corsets was determined to be 0.990 and 0.956, while the WER of the polyurethane corset was 0.298.
Conclusion:
While all three corsets reduce the respiratory motion to a similar amount, the material analysis revealed that the polyurethane corset is not suitable for PT due to its inhomogeneous structure and irregular thickness. On the other hand, the two PE corsets both show very stable material conditions which could, in terms of physics, easily be included in treatment planning and a fractionated treatment scheme. However, due to their different construction approach, the PE corsets have respective benefits in accuracy of fit, flexibility, cost and the time required for preparation.
-
Lecture (Conference)
ESTRO 38, 26.-30.04.2019, Mailand, Italien
Permalink: https://www.hzdr.de/publications/Publ-28064
Ultrafast Self-Induced X-Ray Transparency and Loss of Magnetic Diffraction
Chen, Z.; Higley, D. J.; Beye, M.; Hantschmann, M.; Mehta, V.; Hellwig, O.; Mitra, A.; Bonetti, S.; Bucher, M.; Carron, S.; Chase, T.; Jal, E.; Kukreja, R.; Liu, T.; Reid, A. H.; Dakovski, G. L.; Föhlisch, A.; Schlotter, W. F.; Dürr, H. A.; Stöhr, J.
Abstract
Using ultrafast ≃2.5 fs and ≃25 fs self-amplified spontaneous emission pulses of increasing intensity and a novel experimental scheme, we report the concurrent increase of stimulated emission in the forward direction and loss of out-of-beam diffraction contrast for a Co/Pd multilayer sample. The experimental results are quantitatively accounted for by a statistical description of the pulses in conjunction with the optical Bloch equations. The dependence of the stimulated sample response on the incident intensity, coherence time, and energy jitter of the employed pulses reveals the importance of increased control of x-ray free electron laser radiation.
-
Physical Review Letters 121(2018), 137403
DOI: 10.1103/PhysRevLett.121.137403
Cited 20 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28063
Adaptive Micromixer Based on the Solutocapillary Marangoni Effect in a Continuous-Flow Microreactor
Bratsun, D.; Kostarev, K.; Mizev, A.; Aland, S.; Mokbel, M.; Schwarzenberger, K.; Eckert, K.
Abstract
Continuous-flow microreactors are an important development in chemical engineering technology, since the pharmaceutical production needs flexibility in reconfiguring the synthesis system rather than large volumes of product yield. Microreactors of this type have a special vessel, in which the convective vortices are organized to mix the reagents in order to increase the product output. We propose a new type of micromixer based on the intensive relaxation oscillations induced by a fundamental effect discovered recently. The mechanism of these oscillations was found to be a coupling of the solutal Marangoni effect, buoyancy and diffusion. The phenomenon can be observed in the vicinity of an air-liquid (or liquid-liquid) interface with inhomogeneous concentration of a surface-active solute. Important features of the oscillations are demonstrated experimentally and numerically. The periodicity of the oscillations is a result of the repeated regeneration of the Marangoni driving force.
This feature is used in our design of a micromixer with a single air bubble inside the reaction zone.
We show that the micromixer does not consume external energy and adapts to the medium state due to feedback. It switches on automatically each time when a concentration inhomogeneity in the reaction zone occurs, and stops to mix when the solution becomes sufficiently uniform.
-
Micromachines 9(2018)11, 600
DOI: 10.3390/mi9110600
Cited 24 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28062
Information transmission by Marangoni-driven relaxation oscillations at droplets
Mokbel, M.; Schwarzenberger, K.; Aland, S.; Eckert, K.
Abstract
Marangoni-driven relaxation oscillations can be observed in many systems where concentration gradients of surface-active substances exist. In the present paper, we describe the experimentally observed coupling between relaxation oscillations at neighboring droplets in a concentration gradient. By a numerical parameter study, we evaluate the oscillation characteristics depending on relevant material parameters and the pairwise droplet distance. Based on these findings, we demonstrate that hydrodynamic interaction in multidroplet configurations can lead to a synchronization of the oscillations over the whole ensemble. This effect has the potential to be used as a novel approach for information transmission in microfluidic applications.
-
Soft Matter 14(2018), 9250-9262
DOI: 10.1039/c8sm01720d
Cited 3 times in Scopus
Downloads
- Final Draft PDF 7 MB Secondary publication
- Fulltext from pubs.rsc.org
Permalink: https://www.hzdr.de/publications/Publ-28061
FMISO-PET-based lymph node hypoxia adds to the prognostic value of tumor only hypoxia in HNSCC patients
Bandurska-Luque, A.; Löck, S.; Haase, R.; Richter, C.; Zöphel, K.; Abolmaali, N.; Seidlitz, A.; Appold, S.; Krause, M.; Steinbach, J.; Kotzerke, J.; Zips, D.; Baumann, M.; Troost, E.
Abstract
Purpose: This secondary analysis of the prospective study on repeat [18F]fluoromisonidazole (FMISO)-PET in patients with locally advanced head and neck squamous cell carcinomas (HNSCC) assessed the prognostic value of synchronous hypoxia in primary tumor (Tu) and lymph node metastases (LN), and evaluated whether the combined reading was of higher prognostic value than that of primary tumor hypoxia only. Methods: This analysis included forty-five LN-positive HNSCC patients. FMISO-PET/CTs were performed at baseline, weeks 1, 2 and 5 of radiochemotherapy. Based on a binary scale, Tu and LN were categorized as hypoxic or normoxic, and two prognostic parameters were defined: Tu-hypoxia (independent of the LN oxygenation status) and synchronous Tu-and-LN-hypoxia. In fifteen patients with large LN (N = 21), additional quantitative analyses of FMISO-PET/CTs were performed. Imaging parameters at different time-points were correlated to the endpoints, i.e., locoregional control (LRC), local control (LC), regional control (RC) and time to progression (TTP). Survival curves were estimated using the cumulative incidence function. Univariable and multivariable Cox regression was used to evaluate the prognostic impact of hypoxia on the endpoints. Results: Synchronous Tu-and-LN-hypoxia was a strong adverse prognostic factor for LC, LRC and TTP at any of the four time-points (p ≤ 0.004), whereas Tu-hypoxia only was significantly associated with poor LC and LRC in weeks 2 and 5 (p ≤ 0.047), and with TTP in week 1 (p = 0.046). The multivariable analysis confirmed the prognostic value of synchronous Tu-and-LN-hypoxia regarding LRC (HR = 14.8, p = 0.017). The quantitative FMISO-PET/CT parameters correlated with qualitative hypoxia scale and RC (p < 0.001, p ≤ 0.033 at week 2, respectively). Conclusions: This secondary analysis suggests that combined reading of primary tumor and LN hypoxia adds to the prognostic information of FMSIO-PET in comparison to primary tumor assessment alone in particular prior and early during radiochemotherapy. Confirmation in ongoing trials is needed before using this marker for personalized radiation oncology. © 2018 Elsevier B.V.
Keywords: FMISO-PETHypoxia; Locally advanced HNSCC; Lymph node; Prognostic biomarker
-
Radiotherapy and Oncology 130(2019), 97-103
Online First (2018) DOI: 10.1016/j.radonc.2018.09.008
Cited 14 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28060
Irradiation effects in monazite-(Ce) and zircon: Raman and photoluminescence study of Au-irradiated FIB foils
Nasdala, L.; Akhmadaliev, S.; Artac, A.; Chanmuang, N. C.; Habler, G.; Lenz, C.
Abstract
Lamellae of 1.5 µm thickness, prepared from well-crystallised monazite-(Ce) and zircon samples using the focused-ion-beam technique, were subjected to triple irradiation with 1 MeV Au+ ions (15.6% of the respective total fluence), 4 MeV Au2+ ions (21.9%) and 10 MeV Au3+ ions (62.5%). Total irradiation fluences were varied in the range 4.5E12 -1.2E14 ions/cm2. The highest fluence resulted in amorphisation of both minerals; all other irradiations (i.e. up to 4.5E13 ions/cm2) resulted in moderate to severe damage. Lamellae were subjected to Raman and laser-induced photoluminescence analysis, in order to provide a means of quantifying irradiation effects using these two micro-spectroscopy techniques. Based on extensive Monte Carlo calculations and subsequent defect-density estimates, irradiation-induced spectroscopic changes are compared with those of naturally self-irradiated samples. The finding that ion irradiation of monazite-(Ce) may cause severe damage or even amorphisation, is in apparent contrast to the general observation that naturally self-irradiated monazite-(Ce) does not become metamict (i.e. irradiation-amorphised), in spite of high self-irradiation doses. This is predominantly assigned to the continuous low-temperature damage annealing undergone by this mineral; other possible causes are discussed. According to cautious estimates, monazite-(Ce) samples of Mesoproterozoic to Cretaceous ages have stored only about 1% of the total damage experienced. In contrast, damage in ion-irradiated and naturally self-irradiated zircon is on the same order; reasons for the observed slight differences are discussed. We may assess that in zircon, alpha decays create significantly less than 1000 Frenkel-type defect pairs per event, which is much lower than previous estimates. Amorphisation occurs at defect densities of about 0.10 dpa (displacements per lattice atom).
Keywords: Radiation damage; Heavy-ion irradiation; Focused ion beam; Raman spectroscopy; Photoluminescence
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28059) publication
-
Physics and Chemistry of Minerals 45(2018), 855-871
DOI: 10.1007/s00269-018-0975-9
ISSN: 0342-1791
Cited 23 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28059
Site-controlled formation of single Si nanocrystals in a buried SiO₂ matrix using ion beam mixing
Xu, X.; Prüfer, T.; Wolf, D.; Engelmann, H.-J.; Bischoff, L.; Hübner, R.; Heinig, K.-H.; Möller, W.; Facsko, S.; von Borany, J.; Hlawacek, G.
Abstract
For future nanoelectronic devices—such as room-temperature single electron transistors—the site controlled formation of single Si Nanocrystal (NC) is a crucial prerequisite. Here, we report an approach to fabricate single Si NCs via medium-energy Si+ or Ne+ ion beam mixing of Si into a buried SiO₂ layer followed by thermally activated phase separation. Binary Collision Approximation and kinetic Monto Carlo methods are conducted to gain atomistic insight into the influence of relevant experimental parameters on the Si NC formation process. Energy Filtered Transmission Electron Microscopy is performed to obtain quantitative values on the Si NC size and distribution in dependence of the layer stack geometry, ion fluence and thermal budget. Employing a focused Ne+ beam from a Helium Ion Microscope, we demonstrate site-controlled self-assembly of single Si NCs. Line irradiation with a fluence of 3000Ne+/nm² and a line width of 4 nm leads to the formation of a chain of Si NCs, and a single NC with 2.2 nm diameter is subsequently isolated and visualized in a few nm thin lamella prepared by Focused Ion Beam (FIB). The Si NC is centered between the SiO₂ layers and the perpendicular to the incident Ne+ beam.
Keywords: Helium Ion Microscopy; ion beam mixing; single electron transistor; phase separation; Monte Carlo simulations
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28058) publication
-
Beilstein Journal of Nanotechnology 9(2018), 2883-2892
DOI: 10.3762/bjnano.9.267
Cited 16 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28058
Smart Tomographic Sensors for Advanced Industrial Process Control - TOMOCON
Hampel, U.; Wondrak, T.; Bieberle, M.; Lecrivain, G.; Schubert, M.; Eckert, K.; Reinecke, S.
Abstract
With the recent developments in high-power massive parallel computing, process tomography has gained the required real-time capability of being employed as sensors in advanced control systems. Process tomography techniques are of great value as they provide distributed process parameters for opaque processes.
The European Training Network TOMOCON joins 27 international academic and industry partners working together in the emerging field of industrial process control using smart tomographic sensors to lay the scientific and technological fundamentals of integrating imaging sensors into industrial processes and to demonstrate its functional feasibility on lab and pilot-scale applications. Particular focus is on the training of the doctoral researchers in the fields of process tomography hardware, control systems design, industrial process design, multi-physics modelling, and human-computer interaction.
The teams are engaged in multi-disciplinary research on various tomographic imaging modalities, tomographic image processing as well as advanced multi-physics modelling of processes, sensors and actuators. Proof-of-principle demonstrations of tomography-based processes focus on important industrial processes, such as inline fluid separation, microwave drying of porous materials, continuous steel casting and ultrasound-controlled crystallization.
Involved research facilities
- TOPFLOW Facility
-
Poster
ProcessNet-Jahrestagung und 33. DECHEMA-Jahrestagung der Biotechnologen 2018, 10.-15.09.2018, Aachen, Deutschland -
Abstract in refereed journal
Chemie Ingenieur Technik 90(2018)9, 1238-1239
DOI: 10.1002/cite.201855235
Permalink: https://www.hzdr.de/publications/Publ-28057
Investigation of bioreactors by smart sensor particles
Reinecke, S. F.; Hampel, U.
Abstract
Advanced monitoring of the spatio-temporal distribution of process parameters in the large-scale vessels of chemical or bioreactors, such as industrial fermenters, biogas digesters and activated sludge basins, offers a high potential for the investigation and further optimization of plants and embedded processes. However, in most industrial scale applications the acquisition of these parameters and their spatial distributions in the large-scale vessels is hampered by the limited access to the process itself, because sensor mounting or cable connections are not feasible or desired. Therefore, state of the art instrumentation of such reactors is commonly limited to few spatial positions where it is doubtfully assumed that the measured parameters are representative for the whole reaction mixture.
Instrumented sensor particles have been developed by Thiele et al. [1] for investigation of hydrodynamic and biochemical processes chemical reactors and bioreactors. The sensor particles allow autonomous long-term measurement of spatially distributed process parameters in the chemically and mechanically harsh environments of agitated industrial vessels. Each sensor particle comprises of an on-board measurement electronics that logs the signals of the embedded sensors. A buoyancy control unit enables automated taring to achieve neutral buoyancy and thus flow-following capabilities of the sensor particles [2]. Moreover, controlled floating of the sensor particles is possible to expose them for recovery from the fluid surface. The paper presents results of the sensor system validation and tests in an air-water column reactor, a pilot biogas digester and a waste water treatment plant. Moreover, ongoing developments of smart sensor particles features, i.e. magnetic position detection and inertial position tracking, are presented.
Involved research facilities
- TOPFLOW Facility
-
Lecture (Conference)
ProcessNet-Jahrestagung und 33. DECHEMA-Jahrestagung der Biotechnologen 2018, 10.-15.09.2018, Aachen, Deutschland -
Abstract in refereed journal
Chemie Ingenieur Technik 90(2018)9, 1268-1268
DOI: 10.1002/cite.201855298
Permalink: https://www.hzdr.de/publications/Publ-28056
Inertial position tracking of flow following sensor particles
Reinecke, S. F.; Hampel, U.
Abstract
In this paper, a concept for inertial position tracking of flow following sensor particles based on data fusion of inertial sensors is presented. The employed data fusion technique is quaternion based and uses an extended Kalman filter algo-rithm. A generalized sensor system kinematics has been developed to test the filter algorithm where two data conditions have been considered. Eventually, first simulation results are compared which shows the performance of the filter re-garding sensor drift and noise.
Involved research facilities
- TOPFLOW Facility
-
Contribution to proceedings
Sensoren und Messsysteme 2018 ∙ 26. – 27.06.2018 in Nürnberg, 26.-27.06.2018, Nürnberg, Deutschland
Beiträge der 19. ITG/GMA-Fachtagung 26. – 27. Juni 2018 in Nürnberg, 978-3-8007-4683-5 -
Lecture (Conference)
Sensoren und Messsysteme 19. ITG/GMA-Fachtagung 26. – 27. Juni 2018 in Nürnberg, 26.-27.06.2018, Nürnberg, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-28055
Magnetic Communication Using High-Sensitivity Magnetic Field Detectors
Hott, M.; Hoeher, P. A.; Reinecke, S. F.
Abstract
In this article, an innovative approach for magnetic data communication is presented. For
this purpose, the receiver coil of a conventional magneto-inductive communication system is replaced by a high-sensitive wideband magnetic field sensor. The results show decisive advantages offered by sensitive magnetic field sensors, including a higher communication range for small receiver units. This approach supports numerous mobile applications where receiver size is limited, possibly in conjunction with multiple detectors. Numerical results are supported by a prototype implementation employing an anisotropic magnetoresistive sensor.
Keywords: wireless communication; magnetic induction communication; mobile sensing systems; magnetic sensors; RF-challenging environments
Involved research facilities
- TOPFLOW Facility
-
Sensors 19(2019)15, 3415
DOI: 10.3390/s19153415
Cited 24 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28054
Destabilization of DNA through interstrand crosslinking by UO22+
Rossberg, A.; Abe, T.; Okuwaki, K.; Barkleit, A.; Fukuzawa, K.; Nakano, T.; Mochizuki, Y.; Tsushima, S.
Abstract
UO22+ forms an interstrand crosslink between two different strands from a single DNA, which hardly affects the hydrogen bonds between nucleobase pairs whereas it destabilizes the π–π stacking between the two nucleobases in the vicinity of UO22+– bound phosphate. Thereby, fragility of DNA backbone increases upon UO22+ binding.
Keywords: Fragment molecular orbital method; DNA; chemotoxicity; uranyl(VI); interstrand crosslink; EXAFS
Involved research facilities
- Rossendorf Beamline at ESRF DOI: 10.1107/S1600577520014265
Related publications
- DOI: 10.1107/S1600577520014265 is cited by this (Id 28053) publication
-
Chemical Communications 55(2019), 2015-2018
DOI: 10.1039/C8CC09329F
Cited 12 times in Scopus
Downloads
- Final Draft PDF 747 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28053
HEFIB2018 – Helium and emerging focused ion beams
Abstract
Die zweite HEFIB – Helium and emerging focused ion beams Konferenz fand vom 11. bis zum 13. Juni in Dresden statt. Das erste Treffen unter diesem Namen fand 2016 in Luxemburg statt. Zwei Jahre später fand planmäßig die zweite HEFIB statt. Ein Teil des bewährten Organisationsteams aus Luxemburg und Deutschland wurde mit neuen Mitgliedern aus Japan und den USA vervollständigt.
Keywords: Konferenzreport
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28052) publication
-
Elektronenmikroskopie 44(2018), 21-22
Permalink: https://www.hzdr.de/publications/Publ-28052
Visible Light Actuated Efficient Exclusion Between Plasmonic Ag/AgCl Micromotors and Passive Beads
Wang, X.; Baraban, L.; R. Misko, V.; Nori, F.; Huang, T.; Cuniberti, G.; Fassbender, J.; Makarov, D.
Abstract
Insight is provided into the collective behavior of visible‐light photochemically driven plasmonic Ag/AgCl Janus particles surrounded by passive polystyrene (PS) beads. The active diffusion of single Janus particles and their clusters (small: consisting of two or three Janus particles and large: consisting of more than ten Janus particles), and their interaction with passive PS beads, are analyzed experimentally and in simulations. The diffusivity of active Janus particles, and thus the exclusive effect to passive PS beads, can be regulated by the number of single Janus particles in the cluster. On the simulation side, the Langevin equations of motion for self‐propelled Janus particles and diffusing passive PS beads are numerically solved using Molecular‐Dynamics simulations. The complex interactions of both subsystems, including elastic core‐to‐core interactions, short‐range attraction, and effective repulsion due to light‐induced chemical reactions are considered. This complex mixed system not only provides insight to the interactive effect between active visible light‐driven self‐propelled micromotors and passive beads, but also offers promise for implications in light‐controlled propulsion transport and chemical sensing.
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28051) publication
-
Small 14(2018)44, 1802537
DOI: 10.1002/smll.201802537
Cited 35 times in Scopus
Downloads
- Final Draft PDF 1,2 MB Secondary publication
- Fulltext from onlinelibrary.wiley.com
Permalink: https://www.hzdr.de/publications/Publ-28051
High-Motility Visible Light-Driven Ag/AgCl Janus Micromotors
Wang, X.; Baraban, L.; Nguyen, A.; Ge, J.; R. Misko, V.; Tempere, J.; Nori, F.; Formanek, P.; Huang, T.; Cuniberti, G.; Fassbender, J.; Makarov, D.
Abstract
Visible light‐driven nano/micromotors are promising candidates for biomedical and environmental applications. This study demonstrates blue light‐driven Ag/AgCl‐based spherical Janus micromotors, which couple plasmonic light absorption with the photochemical decomposition of AgCl. These micromotors reveal high motility in pure water, i.e., mean squared displacements (MSD) reaching 800 µm2 within 8 s, which is 100× higher compared to previous visible light‐driven Janus micromotors and 7× higher than reported ultraviolet (UV) light‐driven AgCl micromotors. In addition to providing design rules to realize efficient Janus micromotors, the complex dynamics revealed by individual and assemblies of Janus motors is investigated experimentally and in simulations. The effect of suppressed rotational diffusion is focused on, compared to UV light‐driven AgCl micromotors, as a reason for this remarkable increase of the MSD. Moreover, this study demonstrates the potential of using visible light‐driven plasmonic Ag/AgCl‐based Janus micromotors in human saliva, phosphate‐buffered saline solution, the most common isotonic buffer that mimics the environment of human body fluids, and Rhodamine B solution, which is a typical polluted dye for demonstrations of photocatalytic environmental remediation. This new knowledge is useful for designing visible light driven nano/micromotors based on the surface plasmon resonance effect and their applications in assays relevant for biomedical and ecological sciences.
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28050) publication
-
Small (2018), 1803613
DOI: 10.1002/smll.201803613
Cited 60 times in Scopus
Downloads
- Final Draft PDF 1,6 MB Secondary publication
- Fulltext from onlinelibrary.wiley.com
Permalink: https://www.hzdr.de/publications/Publ-28050
Control of domain structure and magnetization reversal in thick Co/Pt multilayers
Fallarino, L.; Oelschlägel, A.; Arregi, J. A.; Bashkatov, A.; Samad, F.; Böhm, B.; Chesnel, K.; Hellwig, O.
Abstract
We present a study of the magnetic properties of [Co(3.0nm)/Pt(0.6nm)]N multilayers as a function of Co/Pt bilayer repetitions N. Magnetometry investigation reveals that samples with high N exhibit two characteristic magnetization reversal mechanisms, giving rise to two different morphologies of the remanent domain pattern. For applied magnetic field angles near the in-plane field orientation, the magnetization reversal proceeds via a spontaneous instability of the uniform magnetic state resulting in perpendicular stripe domains. Conversely, for field angles close to the out-of-plane orientation, the reversal occurs via domain nucleation and propagation leading to a maze-like domain pattern at remanence. Our measurements further enable the characterization of the N-dependent energy balance between the magnetic anisotropy and magnetostatic energy contributions, revealing a gradual disappearance of the domain nucleation process during magnetization reversal for N < 14. This leads to the exclusive occurrence of an instability reversal mechanism for all field orientations as well as aligned-like stripe domains at remanence. Furthermore, a detailed study of the influence of the magnetic history allows the determination of a range of material properties and magnetic field strengths, where a lattice of bubble domains with remarkably high density is stabilized. These modulations of the ferromagnetic order parameter are found to strongly depend on N, in terms of center-to-center bubble distance as well as of bubble diameter. Moreover, such Co/Pt multilayers could be utilized to engineer field reconfigurable bubble domain lattices, which can resemble magnonic crystals.
Keywords: Co/Pt thick multilayers; Magnetic bubble domains; magnonic crystals
-
Physical Review B 99(2019), 024431
DOI: 10.1103/PhysRevB.99.024431
Cited 38 times in Scopus
Downloads
- Final Draft PDF 2,2 MB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28049
Crystal Structure of Regularly Th-Symmetric [U(NO3)6]2− Salts with Hydrogen Bond Polymers of Diamide Building Blocks
Takao, K.; Kazama, H.; Ikeda, Y.; Tsushima, S.
Abstract
Hexanitratouranate(IV), [U(NO3)6]2−, has been crystallized with anhydrous H+ counter cations stabilized by formation of hydrogen bond polymers with selected diamide building blocks. Thanks to the significant moderation of electrostatic interactions between the anions and cations, the molecular structure of [U(NO3)6]2− in these compounds is regularly Th-symmetric. The f-f transitions stemming from 5f2 configuration of U4+ is strictly forbidden by the Laporte selection rule in such a centrosymmetric system , so that the obtained compounds are nearly colourless in contrast to other U(IV) species usually coloured in green.
-
Angewandte Chemie - International Edition 58(2019), 240-243
DOI: 10.1002/anie.201811731
Cited 10 times in Scopus -
Angewandte Chemie 131(2019), 246-249
DOI: 10.1002/ange.201811731
Permalink: https://www.hzdr.de/publications/Publ-28048
Towards Utilising Photocrosslinking of Polydiacetylenes for the Preparation of “Stealth” Upconverting Nanoparticles
Nsubuga, A.; Zarschler, K.; Sgarzi, M.; Graham, B.; Stephan, H.; Joshi, T.
Abstract
We demonstrate a novel strategy for preparing hydrophilic upconverting nanoparticles (UCNPs) by harnessing the photocrosslinking ability of diacetylenes. Replacement of the hydrophobic oleate coating on the UCNPs with 10,12-pentacosadiynoic acid, followed by overcoating with diacetylene phospholipid and subsequent photocrosslinking under 254 nm irradiation produces water-dispersible polydiacetylene-coated UCNPs. These UCNPs resist the formation of a biomolecular corona and show great colloidal stability. Furthermore, amine groups on the diacetylene phospholipid allow for functionalisation of the UCNPs with, for example, radiolabels or targeting moieties. These results demonstrate that this new surface coating method has great potential for use in the preparation of UCNPs with improved biocompatibility.
Keywords: Crosslinking; Diacetylene; Lanthanides; Nanomaterials; Upconversion
-
Angewandte Chemie - International Edition 57(2018), 16036
DOI: 10.1002/anie.201811003
Cited 21 times in Scopus
Downloads
- Final Draft PDF 2,2 MB Secondary publication
- Fulltext from onlinelibrary.wiley.com
Permalink: https://www.hzdr.de/publications/Publ-28047
From curvilinear magnetism to shapeable magnetoelectronics (plenary)
Makarov, D.
Abstract
Extending two-dimensional structures into the three-dimensional (3D) space has become a general trend in multiple disciplines, including electronics, photonics, plasmonics and magnetics. This approach provides means to modify conventional or to launch novel functionalities by tailoring curvature and 3D shape. In the case of 3D curved magnetic thin films and nanowires the physics is driven by the interplay between exchange and magnetostatic interactions, which contain spatial derivatives in their energy functionals [1,2]. This makes both interactions sensitive to the appearance of bends and twists in the physical space. Theoretical works predict the curvature-induced effective anisotropy and effective Dzyaloshinskii-Moriya interaction resulting in a multitude of novel effects including magnetochiral effects (chirality symmetry breaking) and topologically induced magnetization patterning.
Those 3D magnetic architectures are already proven to be application relevant for life sciences, targeted delivery, realization of 3D spin-wave filters, and magneto-encephalography devices to name just a few. To this end, the initially fundamental topic of the magnetism in curved geometries strongly benefited from the input of the application-oriented community, which among others explores the shapeability aspect of the curved magnetic thin films. These activities resulted in the development of the family of shapeable magnetoelectronics [3], which already includes flexible, printable, stretchable and even mechanically imperceptible magnetic field sensorics [4,5].
The balance between the fundamental and applied inputs into the topic of magnetism in curved geometries is rather unique. This stimulates even further the development of new theoretical methods and novel fabrication/characterization techniques. The synergy will definitely enable us surpassing the exploratory research and will pave the way towards novel device concepts, where the geometry of a functional thin film will play a decisive role in determining the device performance.
References
[1] R. Streubel, D. Makarov et al., J. Phys. D: Appl. Phys. 49, 363001 (2016).
[2] D. Sander, D. Makarov et al., J. Phys. D: Appl. Phys. 50, 363001 (2017).
[3] D. Makarov et al., Appl. Phys. Rev. 3, 011101 (2016).
[4] G. S. Canon Bermudez, D. Makarov et al., Science Advances 4, eaao2623 (2018).
[5] M. Melzer, D. Makarov et al., Nat. Commun. 6, 6080 (2015).
Keywords: curvilinear magnetism; flexible electronics; magnetic field sensors
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28046) publication
-
Invited lecture (Conferences)
XIV International Conference on Applied Physics and Electronics, 24.-26.10.2018, Kyiv, Ukraine
Permalink: https://www.hzdr.de/publications/Publ-28046
Intelligent materials and devices
Makarov, D.
Abstract
In this invited talk I will Highlight activities of the Group FWIN-I "Intelligent materials and devices".
Keywords: anitiferromagnetic spintronics; flexible electronics; curvilinear magnetism
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28045) publication
-
Invited lecture (Conferences)
Advancing Science through International Cooperation: Forum of the Ukrainian Research Diaspora, 20.-22.10.2018, Kyiv, Ukraine
Permalink: https://www.hzdr.de/publications/Publ-28045
Flexible electronics: from interactive on-skin devices to in vivo applications
Makarov, D.
Abstract
In this invited talk I will Review our recent activities on flexible electronics including interactive magnetic Skins and highly compliant devices for in vivo applications.
Keywords: flexible electronics; magnetic field sensors
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28044) publication
-
Invited lecture (Conferences)
Seminar at the Kyiv Academic University, 19.10.2018, Kyiv, Ukraine
Permalink: https://www.hzdr.de/publications/Publ-28044
Injection locking of multiple auto-oscillation modes in a tapered nanowire spin Hall oscillator
Wagner, K.; Smith, A.; Hache, T.; Chen, J.-R.; Yang, L.; Montoya, E.; Schultheiss, K.; Lindner, J.; Fassbender, J.; Krivorotov, I.; Schultheiss, H.
Abstract
Spin Hall oscillators (SHO) are promising candidates for the generation, detection and amplification of high frequency signals, that are tunable through a wide range of operating frequencies. They offer to be read out electrically, magnetically and optically in combination with a simple bilayer design. Here, we experimentally study the spatial dependence and spectral properties of auto-oscillations in SHO devices based on Pt(7 nm)/ Ni80Fe20(5nm) tapered nanowires. Using Brillouin light scattering microscopy, we observe two individual self- localized spin-wave bullets that oscillate at two distinct frequencies (5.2 GHz and 5.45 GHz) and are localized at different positions separated by about 750 nm within the SHO. This state of a tapered SHO has been predicted by a Ginzburg-Landau auto-oscillator model, but not yet been directly confirmed experimentally. We demonstrate that the observed bullets can be individually synchronized to external microwave signals, leading to a frequency entrainment, linewidth reduction and increase in oscillation amplitude for the bullet that is selected by the microwave frequency. At the same time, the amplitude of other parasitic modes decreases, which promotes the single-mode operation of the SHO. Finally, the synchronization of the spin-wave bullets is studied as a function of the microwave power. We believe that our findings promote the realization of extended spin Hall oscillators accomodating several distinct spin-wave bullets, that jointly cover an extended range of tunability.
Keywords: Magnonik; auto-oscillation; magnetic auto-oscillator; spin Hall oscillator; magnetization dynamic; Brillouin-Light-Scattering
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28043) publication
-
Scientific Reports 8(2018), 16040
DOI: 10.1038/s41598-018-34271-4
Cited 14 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28043
Giant impact of self-photothermal on light-induced ultrafast insulator-to-metal transition in VO₂ nanofilms at terahertz frequency
Zhai, Z.-H.; Chen, S.-C.; Du, L.-H.; Zhong, S.-C.; Huang, W.; Li, Z.-R.; Schneider, H.; Shi, Q.; Zhu, L.-G.
Abstract
Ultrafast detection and switching of light are key processes in high-speed optoelectronic devices. However, the performances of VO₂-based optoelectronics are strongly degraded by photothermal. The mechanism of the latter is still unclear. Here, by using femtosecond-laser (fs-laser) driven kinetic terahertz wave absorption, we quantitatively separate slow photothermal response and ultrafast photodoping response (e.g. light-induced insulator-to-metal transition) from second- to picosecond-timescales, and discover the competing interplay between them. With self-photothermal (mainly determined by fs-laser pulse repetition rate and pump fluence), the ultrafast transition time was degraded by 190% from 50 ps to 95 ps, the ultrafast transition threshold was decreased to 82% from 11mJ/cm² to 9mJ/cm², while the amplitudes of the two photoresponse are competing. Percolation theory, along with the macroscopic conductivity response, is used to explain the competing interplay. Our findings are relevant for designing and optimizing VO₂-based ultrafast optoelectronic devices.
Keywords: vanadium-dioxide; insulator-to-metal transition; photo-thermal effect
-
Optics Express 26(2018)21, 28051-28066
DOI: 10.1364/OE.26.028051
Cited 14 times in Scopus
Downloads
Permalink: https://www.hzdr.de/publications/Publ-28042
Interaction of U(VI) with α-isosaccharinic acid: structural elucidation of the formed complexes and implications for the retention of U(VI) on bentonite
Brinkmann, H.; Philipp, T.; Dullies, P.; Shams Aldin Azzam, S.; Patzschke, M.; Roßberg, A.; Moll, H.; Stumpf, T.
Abstract
Low and intermediate level waste contains considerable amounts of cellulosic materials, which will be degraded relatively fast under alkaline conditions, with isosaccharinic acid (ISA), a polyhydroxy-carboxylic acid, being the main degradation product. It has been shown that the α-form is a stronger complexant for certain radionuclides compared to the β-form and that the complex formation affects the sorption as well as the solubility adversely.[1]
In the particular case of U(VI) the number of studies concerning the speciation in the presence of ISA is small. The excellent spectroscopic properties of the uranyl-entity were used to determine the speciation by UV-vis, luminescence, ATR-FTIR and EXAFS spectroscopy properly under acidic conditions. To understand the complex formation mechanism on a molecular level, the behavior of the ligand was simultaneously investigated by ATR-FTIR and NMR spectroscopy and the results were compared to theoretical data from DFT-calculations, whereby a dominant chelate binding motif via the carboxylic and the α-hydroxy-group was identified.
Whereas hydrolysis of U(VI) and carbonate-complexation can be neglected under acidic conditions, they have to be carefully considered under neutral and alkaline conditions as competitive reactions in addition to the complex formation with ISA. In this context the influence of ISA on the retention of U(VI) on bentonite was investigated. Sorption experiments were performed under anaerobic (carbonate-free) and aerobic (with carbonate) conditions between pH 8 and 13 in the presence of ISA. Time-resolved laser-induced fluorescence spectroscopy was used to determine the aqueous speciation of U(VI) and the results will be compared to measurements without ISA.
[1] Van Loon, L. R., et al., Radiochimica Acta, 1999, Vol. 86, https://doi.org/10.1524/ract.1999.86.34.183.
Keywords: uranium; isosaccharinic acid; spectroscopy; bentonite; sorption
Involved research facilities
- Rossendorf Beamline at ESRF DOI: 10.1107/S1600577520014265
Related publications
- DOI: 10.1107/S1600577520014265 is cited by this (Id 28041) publication
-
Lecture (Conference)
International conference Uranium Biogeochemistry, 21.-26.10.2018, Monte Veritá Ascona, Schweiz
Permalink: https://www.hzdr.de/publications/Publ-28041
Detailed characterization of uranyl complexes with small organic ligands on a molecular level: a spectroscopic approach
Brinkmann, H.; Heim, K.; Kaden, P.; Kloditz, R.; Moll, H.; Patzschke, M.
Abstract
The fundamental aspects of uranyl-spectroscopy (absorption, luminescence, IR), data interpretation and subsequent conclusions to interpret the U(VI)-speciation will be discussed. Furthermore, it will be explained how spectroscopy (NMR and IR) can be used to identify the binding properties of organic molecules, exemplarily explained for a polyhydroxy-carboxylic acid.
Keywords: uranium; spectroscopy; isosaccharinic acid
-
Lecture (others)
MIND Advanced training course | Geomicrobiology in radioactive waste disposal, 08.-11.10.2018, Mol, Belgien
Permalink: https://www.hzdr.de/publications/Publ-28040
Age and provenance of detrital zircons from the Oligocene formations of the Marseille–Aubagne basins (SE France): consequences on the geodynamic and palaeogeographic evolution of the northern Gondwana margin
Villeneuve, M.; Gärtner, A.; Nury, D.; Fournier, F.; Arlhac, P.; Linnemann, U.; Caron, J. P.
Abstract
Eight samples from Oligocene sedimentary rocks of the Marseille–Aubagne basins have been analysed for their detrital zircon age spectra. These age spectra provide information about the regional evolution, from Oligocene to Archaean times. The Carboniferous Variscan and the Late Cretaceous to Eocene Pyreneo-Provençal belts represent the latest main tectonic, magmatic, and volcanic events that formed the major zircon age populations found in studied sediments. The obtained detrital zircon age record of the Marseille–Aubagne basins comprises eleven detrital zircon age clusters. They reflect the long and complex geologic history of the sediments source areas and can be ascribed to the opening of the western Mediterranean, the Variscan, Cadomian and Pan-African belts, to an unknown Mesoproterozoic event, to the Eburnean orogeny of West Africa and to the different tectono-metamorphic events that took place in Archaean times. In general, the Palaeo- and Mesozoic events are ascribed to the dispersal of Western and Eastern Gondwana and the Pangaean supercontinent cycle. Thus, the successive recycling of zircon grains from older and the incorporation of them to younger belts lead to new geodynamical models for the northern Gondwana margin evolution. Significant amounts of Mesoproterozoic detrital zircon are at odds with previous hypotheses and re-open the question of the provenance of these zircon age populations. Therefore, this tiny Tertiary basin is a natural archive which records the main geological events in SE France and its vicinity.
Keywords: U–Th–Pb zircon dating; Oligocene; Variscan; Provence; Mediterranean; Palaeogeography; Geodynamic
-
International Journal of Earth Sciences 108(2019)1, 187-212
Online First (2018) DOI: 10.1007/s00531-018-1649-z
Cited 2 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28039
Morphological and Functional Modifications of Optical Thin Films for Space Applications Irradiated with Low-Energy Helium Ions
Pelizzo, M. G.; Corso, A. J.; Tessarolo, E.; Böttger, R.; Hübner, R.; Napolitani, E.; Bazzan, M.; Rancan, M.; Armelao, L.; Jark, W.; Eichert, D.; Martucci, A.
Abstract
Future space missions will operate in increasingly hostile environments, such as those in low-perihelion solar orbits and Jovian magnetosphere. This exploration involves the selection of optical materials and components resistant to the environmental agents. The conditions in space are reproduced on ground through the use of ion accelerators. The effects of He particles coming from the solar wind impinging on a gold thin film have been systematically investigated, considering absorbed doses compatible with the duration of the European Space Agency Solar Orbiter mission. Structural and morphological changes have been proved to be dependent not only on the dose but also on the irradiation flux. A predictive model of the variation of thin film reflectance has been developed for the case of lower flux irradiation. The results are discussed regarding reliability and limitations of laboratory testing. The outcomes are important to address the procedures for the space qualification tests of optical coatings.
Keywords: optical thin films; gold coatings; ion irradiation; helium ions; space weather
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28038) publication
-
ACS Applied Materials and Interfaces 10(2018), 34781-34791
DOI: 10.1021/acsami.8b13085
Cited 21 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28038
Correction for volume recombination in liquid ionization chambers at high dose-per-pulse
Gotz, M.; Karsch, L.; Tölli, H.; Pawelke, J.
Abstract
Purpose: To determine the volume recombination at high dose-per-pulse in liquid ionization chambers (LIC) and to ascertain whether existing calculation methods verified in air-filled chambers may be used to calculate a correction factor.
Methods: Two LICs, one filled with 2,2,4-trimethylpentane (isooctane) the other with tetramethylsilane (TMS), were irradiated in a pulsed, 20 MeV electron beam. Via reference measurements with a Faraday-cup the saturation correction for volume recombination was determined for dose-per-pulse values ranging from about 5 mGy to 1 Gy for both chambers at a pulse duration of 693 ns. In addition, the isooctane-chamber was irradiated with pulses of varying duration, ranging from 5 ps to 10 ms, at a dose-per-pulse of about 76.5 mGy. The dose-per-pulse dependent measurements were compared to calculations based on Boag’s models (with and without a free electron fraction) and the two-dose-rate method. The pulse duration dependent measurements were compared to a numerical calculation that iteratively calculates the charge transport and loss in a 1D model of an ionization chamber.
Results: In TMS only Boag’s model with a free electron fraction is in good agreement with the experimental data. However, in isooctane good agreement is observed between the experimental data, the two-dose-rate method, Boag’s model including a free electron fraction and to a lesser extend also Boag’s model without a free-electron fraction. Furthermore, the pulse duration dependent data for isooctane is well described by the numerical model.
Conclusion: With isooctane as an active medium a LIC could be directly used in a field with high dose-per-pulse utilizing the well established two-dose-rate method to correct for volume recombination. In addition, pulsed fields with variable pulse duration are easily modeled for this medium using a numerical calculation. Other media, as exemplified by the TMS-filled chamber, might require additional considerations, such as including a fraction of free electrons in the consideration of volume recombination.
Keywords: volume recombination correction; liquid ionization chamber; pulsed radiation field
Involved research facilities
- Radiation Source ELBE DOI: 10.17815/jlsrf-2-58
Related publications
- DOI: 10.17815/jlsrf-2-58 is cited by this (Id 28037) publication
-
Medical Physics 46(2019)8, 3692-3699
DOI: 10.1002/mp.13600
Cited 1 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28037
Competing risks in survival data analysis
Dutz, A.; Löck, S.
Abstract
Clinical trials and retrospective studies in the field of radiation oncology often consider time-to-event data as their primary endpoint. Such studies are susceptible to competing risks, i.e. competing events may preclude the occurrence of the event of interest or modify the chance that the primary endpoint occurs. Competing risks are frequently neglected and the event of interest is analysed with standard statistical methods. Here, we would like to create awareness of the problem and demonstrate different methods for survival data analysis in the presence of competing risks.
Keywords: Competing risk; Survival data; Time-to-event data; Cox regression
-
Radiotherapy and Oncology 130(2019), 185-189
Online First (2018) DOI: 10.1016/j.radonc.2018.09.007
Cited 32 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28036
Alkyl Branching Position in Diketopyrrolopyrrole Polymers: Interplay between Fibrillar Morphology and Crystallinity and Their Effect on Photogeneration and Recombination in Bulk-Heterojunction Solar Cells
Shivhare, R.; Erdmann, T.; Hörmann, U.; Collado-Fregoso, E.; Zeiske, S.; Benduhn, J.; Ullbrich, S.; Hübner, R.; Hambsch, M.; Kiriy, A.; Voit, B.; Neher, D.; Vandewal, K.; Mannsfeld, S. C. B.
Abstract
Diketopyrrolopyrrole (DPP)-based donor-acceptor copolymers have gained a significant amount of research interest in the organic electronics community because of their high charge carrier mobilities in organic field-effect transistors (OFETs) and their ability to harvest near-infrared (NIR) photons in solar cells. In this study, we have synthesized four DPP-based donor-acceptor copolymers with variations in the donor unit and the branching point of the solubilizing alkyl chains (at the second or sixth carbon position). Grazing incidence wide-angle X-ray scattering (GIWAXS) results suggest that moving the branching point further away from the polymer backbone increases the tendency for aggregation and yields polymer phases with a higher degree of crystallinity (DoC). The polymers were blended with PC70BM and used as active layers in solar cells. A careful analysis of the energetics of the neat polymer and blend films reveals that the charge-transfer state energy (ECT) of the blend films lies exceptionally close to the singlet energy of the donor (ED*), indicating near zero electron transfer losses. The difference between the optical gap and open-circuit voltage (VOC) is therefore determined to be due to rather high nonradiative (≈ 418 ± 13 mV) and unavoidable radiative voltage losses (≈ 255 ± 8 mV). Even though the four materials have similar optical gaps, the short-circuit current density (JSC) covers a vast span from 7 to 18 mA cm-2 for the best performing system. Using photoluminescence (PL) quenching and transient charge extraction techniques, we quantify geminate and nongeminate losses and find that fewer excitons reach the donor-acceptor interface in polymers with further away branching points due to larger aggregate sizes. In these material systems, the photogeneration is therefore mainly limited by exciton harvesting efficiency.
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28035) publication
-
Chemistry of Materials 30(2018), 6801-6809
DOI: 10.1021/acs.chemmater.8b02739
Cited 13 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28035
Dezentrale Produktion werthaltiger Kohlenwasserstoffe mit Hilfe lastflexibler, integrierter Elektrolyse-Synthese-Apparate
Schwarze, L.; Fogel, S.; Schwabe, F.; Partmann, C.; Lippmann, W.; Kryk, H.; Hurtado, A.; Hampel, U.
Abstract
Der stetige Ausbau von Wind- und Solarenergie in Deutschland erfordert effiziente Technologien zur räumlich-zeitlichen Flexibilisierung des Energieversorgungssystems. Infolge der Netzeinbindung fluktuierender Energien ergeben sich grundlegend neue Anforderungen an die bestehende, grundlastbasierte Energiewirtschaft und deren Infrastruktur. Technologien zur direkten Speicherung von Elektroenergie in relevanten Größenordnungen scheitern derzeit aus verschiedenen Gründen, bspw. der Standort-Limitierung von Pumpspeicherkraftwerken oder der Kostenineffizienz von Batterien. Im Rahmen des Verbundforschungsvorhabens „DELTA“ (EF-RE-Förderkennzeichen: 100240618) wird ein frei skalierbarer, dezentral einsetzbarer, modular aufgebauter, wirtschaftlich attraktiver und technisch flexibler Demonstrator zur chemischen Langzeitspeicherung von Elektroenergie (Power-to-Liquid) entwickelt und erprobt. Strom wird einem tubularen, protonenleitenden Dampf-Elektrolyseur zur Erzeugung von hochreinem Wasserstoff zugeführt. Dieser wird direkt unter stofflicher Verwertung von CO2 einer integrierten, heterogen katalysierten Methanolsynthese unterzogen. Durch die Kopplung stationärer CO2-Emittenten und -Verbraucher wird CO2 in einem geschlossenen Kreislauf nutzbar. Flüssige Kohlenwasserstoffe finden sektorübergreifend sowohl als synthetische Kraftstoffe als auch als Grundstoffe für weitere chemische Produkte oder zur Rückverstromung Verwendung und stellen somit eine interessante Wertschöpfungsalternative innerhalb der Chemie- und Energiewirtschaft dar. Die hohe Systemintegration innerhalb des Demonstrators ermöglicht eine energetisch optimierte Prozessführung sowie ein effizientes Energie- und Stoffstrom-Management, weshalb sich das Reaktorsystem durch geringe Energieverluste, hohe Systemwirkungsgrade, Kosteneffizienz und eine hohe Zuverlässigkeit sowie Lastwechselfähigkeit auszeichnet. Der Demonstrator stellt in einer späteren technischen Anwendung ein Basismodul dar, welches mit weiteren Modulen zu einer flexiblen Gesamtanlage verschaltet werden kann. Im Rahmen der Präsentation soll das grundlegende Anlagenkonzept sowie die ersten Ergebnisse des Basic Engineerings und der rechnergestützten Modellierung und Simulation vorgestellt werden.
Keywords: Elektrolyse; Methanolsynthese; Power-to-X; Lastflexibel; Energiespeicher
-
Lecture (Conference)
Jahrestreffen der ProcessNet-Fachgruppe Energieverfahrenstechnik, 07.-08.03.2018, Frankfurt am Main, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-28034
Simulation des dynamischen Betriebsverhaltens eines gekoppelten Elektrolyse-Synthese-Prozesses für lastflexible Anwendungen
Schöne, C.
Abstract
Im Rahmen der Bachelorarbeit wurde der aktuelle Stand von Wissenschaft und Technik für die Modellierung und Simulation des dynamischen Verhaltens von Hochtemperaturelektrolyseuren sowie für die Synthese von Methanol durch direkte Hydrierung von Kohlenstoffdioxid dargestellt. Aufbauend auf einem 0D-Prozessmodell für die Kopplung einer protonenleitenden Hochtemperaturelektrolysezelle (H-SOEC) mit einer Methanolsynthese wurde das grundlegende stationäre Betriebsverhalten beschrieben und mit Literaturdaten verglichen. Außerdem wurde das dynamische Betriebsverhalten des Gesamtprozesses im Falle von transienten Lastprofilen (Teil-/Volllastsprünge und fluktuierende Profile), verschiedenen Betriebsmodi (An- und Abfahrprozesse) und transienten Randbedingungen charakterisiert sowie wesentliche Strategien zur Steuerung und Regelung abgeleitet.
Keywords: Modellierung und Simulation; Prozessdynamik; Dynamisches Verhalten; Steuerung und Regelung
-
Bachelor thesis
TU Dresden, 2018
Mentor: Stefan Fogel, Holger Kryk
70 Seiten
Permalink: https://www.hzdr.de/publications/Publ-28033
Bestimmung des stationären und dynamischen Betriebsverhaltens einer gekoppelten Elektrolyse-Synthese-Stufe mittels 2D-FEM-Simulationen
Knitt, F.
Abstract
Im Rahmen der Diplomarbeit wurde der aktuelle Stand von Wissenschaft und Technik für die Synthese von Methanol durch direkte Hydrierung von Kohlenstoffdioxid, deren Modellierung und Simulation sowie für das dynamische Verhalten von Hochtemperaturelektrolyseuren dargestellt. Aufbauend auf einer zu ermittelnden Reaktionskinetik wurde ein Modell für die beschriebene Methanolsynthese erstellt und mit vorgegebenen Betriebsparametern simuliert sowie mit Literaturdaten verglichen. Anschließend wurde das Synthesemodell mit einem bereits vorhandenen Modell eines protonenleitenden Hochtemperaturelektrolyseurs (H-SOEC) kombiniert. Mit Hilfe der Modellkombination konnten wesentliche Betriebsparameter (Mengenströme, Produktzusammensetzungen, Temperaturen, etc.) und Betriebslimitationen für einen räumlich eng gekoppelten Betrieb von Elektrolyse und Synthese bestimmt werden.
Keywords: Modellierung; Simulation; SOEC; Methanolsynthese; Dynamisches Verhalten
-
Diploma thesis
TU Dresden, 2018
Mentor: Stefan Fogel, Holger Kryk
94 Seiten
Permalink: https://www.hzdr.de/publications/Publ-28032
Development and evaluation of a 99mTc(III) ‘4 + 1’ complex derived from estradiol for imaging breast cancer
Tejería, E.; Pietzsch, H.-J.; Giglio, J.; Rey, A.
Abstract
Estrogen receptors are overexpressed in about 70% of breast cancer and identification of their presence is important to select the appropriate treatment and evaluate the response.
With this objective, an estradiol derivative (L) 5-((1-carboxy-2-(4-((13S,17S)-3,17-dihydroxy-13-methyl-7,8,9,11,12,13,14,15,16,17-decahydro-6H-cyclopenta[a]phenanthren-17-yl)-1H-1,2,3-triazol-1-yl)ethyl)amino)-N-methylidyne-5-oxopentan-1-aminium, was used to develop a ‘4+1’ complex of Tc(III) for estrogen receptor imaging.
The synthesis of L involved the coupling of the amino group of 3-azido-L-alanine with an activated isonitrile, to then perform a "click chemistry" reaction with the ethinyl group of ethinylestradiol.
Labelling was carried out in two stages, preparation of the precursor [99mTc]Tc-EDTA, using mannitol, EDTA and SnCl2 as reducing agent and simultaneous substitution (30 min at 75°C) with L (20 mg) and the tetradentate coligand 2-[Bis(2-mercaptoethyl)amino]ethanethiol (NS3) (2 mg). The HPLC analysis showed a major peak (tr=13 min). The radiochemical purity of the HPLC purified complex was greater than 95%.
The lipophilicity expressed as logP (partition coefficient between octanol and phosphate buffer 0.1M, pH = 7.4) was 0.48±0.06. The plasma protein binding was (46 ± 6) % at 60 minutes. The complex was stable in the labelling milieu and in human serum for at least 4 hours. Cell uptake in MCF7 cells are in progress.
A potential radiopharmaceutical derived from estradiol was obtained with high radiochemical purity. The complex presents adequate stability and physicochemical properties. In vitro and in vivo studies including nude mice bearing xenografted breast tumors will be used to validate the clinical potentiality.
Involved research facilities
- PET-Center
-
Lecture (Conference)
TeraChen 2018, 26.-29.09.2018, Brixen, Italien
Permalink: https://www.hzdr.de/publications/Publ-28031
Cross-bridged cyclams with bis(phosphinic acid) pendants for a fast Cu(II) complexation: towards efficient 64-Cu labeling
Kubíček, V.; David, T.; Lubal, P.; Pietzsch, H.-J.; Hermanna, P.
Abstract
Copper radioisotopes chelators are commonly based on macrocycles but they mostly suffer from in vivo instability, slow (not efficient) radiolabeling and low selectivity over competing ions. Cyclam derivatives offer high selectivity for Cu(II). Complexes of cross-bridged (CB-) cyclams are very stable in-vivo, however, their radiolabelling is not efficient.
We have found that bis(phosphinic acid) pendant arm (BPi) highly accelerate Cu(II) complexation.[1] It was also found, on Me3cyclam derivatives as model ligands, that phosphonic acid (Po) and bis(phosphorus acid) pendant arms are the most suitable ones for fast chelation.[2]
Chelators with BPi-like pendants on CB-cyclam (cb-BPC) were synthesized. Their complexation properties (structure, thermodynamics, formation/decomplexation kinetics) were investigated and analogous data were also obtained for known phosphorus chelators as cb-TE2P. All ligands are basic (last pKa>13.5) and form thermodynamically stable copper complexes. Other metal ion complexes are hardly formed in water. The Cu(II) complexes are formed quickly with some dependence on a kind of the pendant arms. Complexes of BPi containing chelators are significantly less kinetically inert than those of cb-TE2P but still much more inert than complexes of most of common chelators as DOTA. The phosphonic acid and BPi on CB-cyclams exhibit fast radiolabeling with 64-Cu even at room temperature and the labelled chelators are obtained with a high specific activity. These radiolabelling properties are not altered after conjugations.[3] The ligands can be suggested as a new chelator family for copper radioisotopes.
Involved research facilities
- PET-Center
-
Poster
TeraChem 2018, 26.-29.09.2018, Brixen, Italien
Permalink: https://www.hzdr.de/publications/Publ-28030
Bifunctional cyclam derivatives with a bis(phosphinate) pendant arm as efficient chelators for copper radionuclides
David, T.; Hlinová, V.; Kubíček, V.; Bergmann, R.; Pietzsch, H.-J.; Hermann, P.
Abstract
Bifunctional cyclam derivatives with one bis(phosphinic acid) pendant arm bearing carboxylate, amine, isothiocyanate, azide or cyclooctyne functions in the pendant arm side chain were synthesized (Figure). The bifunctional groups were introduced far from the metal-binding site, either by using newly synthesized bis(phosphinic acid) precursors or by modifying the reactive groups. Direct coupling without protecting the pendant phosphinate or ring secondary amine groups was feasible. The ligands were successfully conjugated to model compounds including oligopeptides, biotin or fluorescent dye.
Labeling of the bifunctional ligands with 64Cu showed very high radiolabeling efficiency, leading to a significantly higher molar activity than that described for other commonly used macrocyclic chelators. It confirms that using properly designed phosphinic acid pendant arm(s) is a good strategy to achieve conjugation flexibility (due to the distant bifunctional site) without compromising the radiolabeling efficiency or the high specific activity of radiopharmaceuticals.
A prototypic representative was evaluated in-vivo by metabolite analysis, biodistribution studies and PET scans. The data clearly showed the very high metabolic stability of the 64Cu chelate unit as no decomplexation was detected. Except for the excretory organs, no prominent uptake and retention was observed.
Thus, bis(phosphinate)-bearing cyclam-based ligands are highly promising radiocopper chelators for conjugation to targeting units, such as peptides, oligonucleotides or antibodies and their fragments.
Involved research facilities
- PET-Center
-
Poster
TeraChem 2018, 26.-29.09.2018, Brixen, Italien
Permalink: https://www.hzdr.de/publications/Publ-28029
On the effect of water hardness in fluorite flotation – the role of ion specificity
Michaux, B.; Rudolph, M.; Reuter, M. A.
Abstract
It is relatively well-established in the literature that the flotation of calcium minerals using fatty acids as collector is very sensitive to the process water composition. In particular, hard waters have often been reported to strongly reduce the target mineral recoveries due to the formation of insoluble compounds such as calcium and / or magnesium dioleate, thus reducing the amount of collector available for adsorption onto the mineral surface. In this study, the flotation of a fluorite pre-concentrate was performed with tall oil, an industrial collector essentially containing fatty acids. The tests were performed in a variety of synthetic waters to simulate multiple degrees of water hardness, and to differentiate the role of magnesium and calcium ions on the flotation performance. The flotation tests revealed that, under the studied conditions, a significant difference between flotation in calcium-rich and magnesium-rich waters was observed, suggesting strong ion-specific effects in the system. Specifically, calcium-rich waters slightly improved the fluorite recovery, whereas magnesium-rich waters caused a decrease in recovery by as much as 20%. This paper is focused on the flotation kinetics aspect of the system. This approach highlighted the interesting finding that calcium ions did not simply increase the fluorite recovery, but also significantly increased its flotation kinetics. The magnesium ions, on the other hand, had the exact opposite effect.
Keywords: Water hardness; ion specificity; flotation kinetics; fluorite; fatty acids
-
Contribution to proceedings
International Mineral Processing Congress, 17.-21.09.2018, Moscow, Russia
Permalink: https://www.hzdr.de/publications/Publ-28028
Water-saving strategies in the mining industry – the potential of mineral processing simulators as a tool for their implementation
Michaux, B.; Hannula, J.; Rudolph, M.; Reuter, M. A.; van den Boogaart, K. G.; Möckel, R.; Kobylin, P.; Hultgren, M.; Peltomäki, M.; Roine, A.; Remes, A.
Abstract
As the mining industry is facing an increasing number of issues related to its fresh water consumption, water-saving strategies are progressively being implemented in the mineral processing plants, often leading to variations in the process water chemistry. However, the impact of water chemistry variations on the process performance is rarely known beforehand, thus creating an obstacle to the implementation of those water-saving strategies. To tackle this problem, the effect the different dissolved species present in the process water have on the processing plant performance must be quantified, and this information must be digitalized in a practical and suitable form to be used in mineral processing simulators. To achieve this goal, a methodology to digitalize the influence of the process water composition on the flotation performance is presented in this paper. Using the flotation of a fluorite ore as case study, the relationship between process water composition and the flotation kinetics of that fluorite ore was determined. This relationship was digitalized in HSC Sim, a mineral processing simulator, turning it into a tool capable of simulating the flotation performance under a variety of process water compositions. Finally, the potential of this new tool to help implementing water-saving strategies on the mine site is discussed, and the challenges that need to be overcome in order to apply this tool at industrial scale are being addressed.
Keywords: Water-saving strategies; Water chemistry; Flotation kinetics; Simulation-based optimization
-
Journal of Environmental Management 234(2019), 546-553
DOI: 10.1016/j.jenvman.2018.11.139
Cited 13 times in Scopus
Downloads
- Final Draft PDF 985 kB Secondary publication
Permalink: https://www.hzdr.de/publications/Publ-28027
Ligand development for the Radiometal Hg-197(m)
Gilpin, M.; Walther, M.; Pietzsch, H.-J.; Steinbach, J.
Abstract
Reactor-produced Hg-197 had previous medical use for imaging[1] but was discontinued due to low stability and low specific-activity. Cyclotron-produced Hg-197(m) can overcome the toxicity problem, due to much higher molar activity[2], allowing access to the radiometal’s useful decay modes (γ for SPECT-imaging. Conversion & auger electrons for therapy) at sub-toxic Hg-concentrations.
Development in Hg ligands for medicinal applications necessitates stability in vivo but the poor long-term stability of Mercury compounds in solution is an ongoing issue[3]. Hg-organometallics show good water-stability and bypass the issue of Hg-S bonds suffering from competition by common biomolecules, e.g. cysteine. Therefore, our focus is on Hg-C chemistry, specifically the strongest bond kind: the mercury-phenyl bond[4].
As prior research has shown that the synthetically simpler route of monodentate ligands (κ1-L2Hg) suffers from significant cleavage[5], this research is centred on the syntheses of bidentate chelators benefitting from entropic stability. Purification of the Hg-197(m) leaves it in an acidic aqueous medium as the chloride salt, thus transmetallation, via stannyl or boronic acid derivatives, was chosen as a viable option for mercury attachment. Chelator designs began with a dibenzylisophthalamide template but low selectivity for the 1:1-compound encouraged a better fitting structure. Recent radio-labelling experiments show promise for specific binding with a design based on the bispidine backbone (attractive for being known in co-ordination chemistry for a variety of metals[6] and possessing bridge linking-functionalisation).
Analyses are performed through radio-TLC and HPLC, whilst stable mercury compound analysis includes Hg-199 NMR.
References :
(1) Sodee. J. Nucl. Med. 1968; 9: 645.
(2) Walther et al. Appl. Radiat. Isot. 2015; 97: 177–181.
(3) Henke et al. Wat. Res. 2000; 34: 3005-3013.
(4) Dean. Lange’s Handbook of Chemistry, 15th ed.; McGraw-Hill Inc, 1998; 606.
(5) Wilhelm. et al. Z. Naturforsch. 2000; 55b: 35–38.
(6) Comba et al. Inorg. Chem. 2009; 48: 6604–6614.
Keywords: Mercury 197; Chelator; Ligand; Radiometal; Bispidine; Cancer; Theragnostics
-
Poster
TERACHEM 2018, 24.-29.09.2018, Bressanone, Italy
Permalink: https://www.hzdr.de/publications/Publ-28026
Development and characterization of a 177Lu-labeled anti-prostate stem cell antigen (PSCA) monoclonal antibody for metastatic prostate cancer
Striese, F.; Bergmann, R.; Bachmann, M.; Arndt, C.; Feldmann, A.; Weißflog, S.; Steinbach, J.; Pietzsch, H.
Abstract
The clinical need of new therapeutics for advanced prostate cancer is continuingly high because there still exist no curative treatment options. It has been shown that especially targeted therapies using radionuclides gives enhanced specificity and increased overall survival of prostate cancer patients. Antibodies represent attractive transport vehicles for the delivery of radionuclides to prostate cancer cells for several reasons, such as: metastatic site location and small volume disease. Here, we describe the development and characterization of a novel 177Lu-labeled antibody-conjugate that offers encouraging features to be used for the therapy PSCA-expressing prostate tumors. The PSCA is a cell surface antigen that is present in nearly all primary prostate tumors and further upregulated in many bone and lymph node metastases. Therefore, it is proposed as a promising tumor target structure for both, therapy and diagnosis, of prostate cancer. Purified PSCA-directed antibody demonstrated a high specificity and affinity, with dissociation constant of 10 nM to PC3-PSCA cells. The antibody was conjugated with, on average, three CHX-A’’-DTPA molecules, as verified by MALDI-TOF analysis. Subsequent radiolabeling of the antibody-chelator-conjugate with Lutetium-177 could be performed at high radiochemical purity (>95%, radio HPLC) while preserving binding properties to the PSCA. SPECT scanning with the 177Lu-labeled antibody-conjugate was used to investigate the targeting potential in mice with established PSCA-expressing tumors. The outcome was the production of excellent high contrast images from 3 to 170 h post injection. With these promising results, we next want to evaluate the antitumor activity in vivo.
Keywords: prostate cancer; metastatic; Prostate Stem Cell Antigen (PSCA); radiolabeled monoclonal antibody; Lu-177; theragnostics
Involved research facilities
- PET-Center
-
Lecture (Conference)
TERACHEM 2018, 26.-29.09.2018, Bressanone, Italy
Permalink: https://www.hzdr.de/publications/Publ-28025
Evaluation of [Tc-99m]Tc-tricarbonyl labeled alpha-melanocyte stimulating hormone derived peptide conjugates for melanoma imaging
Gao, F.; Sihver, W.; Bergmann, R.; Weißflog, S.; Bolzati, C.; Salvarese, N.; Belter, B.; Steinbach, J.; Pietzsch, J.; Pietzsch, H.
Abstract
The melanocortin 1 receptor (MC1R), since overexpressed in melanoma cells, is an attractive target for imaging or treatment of this type of malignancies. The α-melanocyte stimulating hormone (α-MSH) derived peptide NAP-NS1 (Nle-Asp-His-D-Phe-Arg-Trp-Gly-NH2) binds with high affinity [1] and was engineered in three different ways for labeling with [Tc-99m]Tc-tricarbonyl. ɛ-Ahx-β-Ala-NAP-NS1, ethylenglycol (EG)-based linker NAP-NS1 and NAP-NS1 without linker were conjugated with bis(pyridin-2-ylmethyl)amine (DPA) obtaining yields of 42%, 38% and 45%, respectively. For standard purpose non-radioactive Re-DPA-peptides were prepared [2] with yields > 55%. The labeling with a one-pot method was faster than with a two steps method, and even receiving slightly higher radiochemical yields. High stability as well as negligible transschelation was observed for the [Tc-99m]Tc-tricarbonyl-peptide conjugates. The ethylenglycol based linker increased the hydrophilicity. Binding results, first of competition assays with the non-radioactive α-MSH conjugates, and second of saturation assays with the [Tc-99m]Tc-tricarbonyl-DPA peptides resulted in high affinity (low nanomolar range) where the labeled peptides showed a marginal loss of affinity; that was relevant for murine B16F10, as well as for human MeWo and TXM13 cells. The number of binding sites was considerably higher in murine melanoma cells. The three [Tc-99m]Tc-tricarbonyl-peptide conjugates exhibited similar in vitro properties. Preliminary in vivo studies were performed with [Tc-99m]Tc-tricarbonyl-DPA-ɛ-Ahx-β-Ala-NAP-NS1 in rats and showed good metabolic stability in blood and both a renal and hepatobiliary excretion. Hence, it displayed prospective radiochemical and radiopharmacological properties, suggesting a promising candidate for further investigation in a melanoma xenograft model.
[1] Gao et al. J. Amino Acids 2016; 48: 833-847.
[2] Alberto et al. J. Chem. Soc. Dalton 1994; 19: 2815-2820.
Keywords: Melanocortin-1 receptor; α-MSH analogs; Tc-99m labeling; Malignant melanoma
-
Poster
TERACHEM 2018, 26.-29.09.2018, Bressanone, Italy
Permalink: https://www.hzdr.de/publications/Publ-28024
Dynamic Imaging of the Delay-and Tilt-Free Motion of Neel Domain Walls in Perpendicularly Magnetized Superlattices
Finizio, S.; Wintz, S.; Zeissler, K.; Sadovnikov, A. V.; Mayr, S.; Nikitov, S. A.; Marrows, C. H.; Raabe, J.
Abstract
We report on the time-resolved investigation of current- and field-induced domain wall motion in perpendicularly magnetized microwires exhibiting asymmetric exchange interaction by means of scanning transmission x-ray microscopy using a time step of 200 ps. Dynamical domain wall velocities on the order of 50-100 m s−1 were observed. The improvement in the temporal resolution allowed us to observe the absence of incubation times for the motion of the domain wall, together with indications for a negligible inertia. Furthermore, we observed that, for short current and magnetic field pulses, the magnetic domain walls do not exhibit a tilting during its motion, providing a mechanism for the fast, tilt-free, motion of magnetic domain walls.
Keywords: domain wall motion; x-ray microscopy; spin-orbit torques
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28022) publication
-
Nano Letters 19(2019), 375
Online First (2018) DOI: 10.1021/acs.nanolett.8b04091
Cited 14 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28022
Impact of Haloarchaea on speciation of uranium – a multi-spectroscopic approach
Bader, M.; Rossberg, A.; Steudtner, R.; Drobot, B.; Großmann, K.; Schmidt, M.; Musat, N.; Stumpf, T.; Ikeda-Ohno, A.; Cherkouk, A.
Abstract
Haloarchaea represent a predominant part of the microbial community in rock salt, which can serve as host rock for the disposal of high level radioactive waste. However, knowledge is missing about how Haloarchaea interact with radionuclides. Here, we used a combination of spectroscopic and microscopic methods to study the interactions of an extremely halophilic archaeon with uranium, one of the major radionuclides in high level radioactive waste, on a molecular level. The obtained results show that Halobacterium noricense DSM 15987T influences uranium speciation as a function of uranium concentration and incubation time. X-ray absorption spectroscopy reveals the formation of U(VI) phosphate minerals, such as meta-autunite, as the major species at a lower uranium concentration of 30 µM, while U(VI) is mostly associated with carboxylate groups of the cell wall and extracellular polymeric substances at a higher uranium concentration of 85 µM. For the first time, we identified uranium biomineralization in the presence of Halobacterium noricense DSM 15987T cells. These findings highlight the potential importance of Archaea in geochemical cycling of uranium and their role in biomineralization in hypersaline environments, offering new insights into the microbe-actinide interactions in highly saline conditions relevant to the disposal of highly radioactive waste as well as bioremediation.
Involved research facilities
- Rossendorf Beamline at ESRF DOI: 10.1107/S1600577520014265
Related publications
- DOI: 10.1107/S1600577520014265 is cited by this (Id 28021) publication
-
Environmental Science and Technology 52(2018)21, 12895-12904
DOI: 10.1021/acs.est.8b02667
Cited 16 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28021
1,4,7-Triazacyclononane: An effective chelator for copper-64
Kubeil, M.; Pant, K.; Joshi, T.; Stephan, H.
Abstract
1,4,7-Triazacyclononane (TACN) is a versatile platform from which various ligands can be derived to form effective chelators for (radio)copper(II) complexation. [1] The ability of TACN-derivatives to form highly stable complexes with copper(II) is greatly influenced by the number and type of substituents on the macrocyclic ring. The formed copper(II) complexes show a broad variability in their thermodynamic stability and kinetic inertness, varying in structure from square-pyramidal to distorted octahedral. TACN-based BFCAs have also been used for indirect radiolabelling of biomolecules, rendering them suitable for imaging and therapy.
Herein, examples of various copper-64 TACN complexes will be presented which provide a picture of how different substituents influence the coordination mode, electronic properties and in vivo stability of. By applying principles of coordination chemistry, it is possible to tune the affinity of TACN-based ligands for copper ligation, as well as their availability for subsequent biomolecular functionalisation. Target-specific TACN based conjugates (peptides, antibody fragments) and bio(nano)materials labelled with copper-64 enabling tumour imaging and biodistribution studies via positron emission tomography will be discussed as well. [2, 3, 4]
[1] T. Joshi et al. ChemPlusChem 2018; DOI: 10.100 2/cplu.201800103.
[2] K. Pant et al. Bioconjugate Chem. 2015; 26: 906-918.
[3] K. Viehweger et al. Bioconjugate Chem. 2014; 25: 1011-1022.
[4] R. Bergmann et al. Sci. Rep. 2017; 7.
Keywords: TACN; copper-64; chelator
-
Poster
The third International Symposium on Technetium and Other Radiometals in Chemistry and Medicine, 26.-29.09.2018, Brixen, Bressanone, Italia
Permalink: https://www.hzdr.de/publications/Publ-28020
Carbon doping controlled thermoluminescent defect centers in nanoporous alumina for ion beam dosimetry
Bhowmick, S.; Pal, S.; Das, D.; Singh, V. K.; Khan, S. A.; Hübner, R.; Barman, S. R.; Kanjilal, D.; Kanjilal, A.
Abstract
The flexibility of amorphous anodized alumina (AAO) in developing radiation dosimeter for hadron therapy is reported by controlled carbon ion implantation, followed by thermoluminescence (TL) measurements. The efficacy of amorphous AAO in controlling TL sensitivity is found to be governed by an increase in F+ defect centers as a function of carbon concentration, as revealed from the close resemblance of the trend in photoluminescence intensity. Moreover, its nanoporous structure is demonstrated to be advantageous for defect engineering due to the increase in the surface-to-volume ratio. Detailed X-ray photoelectron spectroscopy analysis suggests the formation of F+ centers by substituting Al3+ ions with C2+ in the vicinity of oxygen vacancies, where depth-dependent study showed the evolution of conducting channels owing to sp2 hybridized C–C bonding, leading to a differential charging effect. This work provides a direction to tune nanoporous AAO in its amorphous form for future ion beam dosimetry.
Involved research facilities
- Ion Beam Center DOI: 10.17815/jlsrf-3-159
Related publications
- DOI: 10.17815/jlsrf-3-159 is cited by this (Id 28018) publication
-
Journal of Applied Physics 124(2018), 134902
DOI: 10.1063/1.5050246
Cited 5 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28018
GitLab-Runner fork
Frust, T.
Abstract
This is a fork of the official gitlab-runner repository at https://gitlab.com/gitlab-org/gitlab-runner and is used to generate binaries and the helper image for the Power architecture (ppc64le), since this architecture is not officially supported by GitLab itself.
-
Software in external data repository
Publication year 2018
Programming language: Go
System requirements: Power architecture (ppc64le)
License: MIT (Link to license text)
Hosted on HZDR GitLab: Link to location
Permalink: https://www.hzdr.de/publications/Publ-28017
Improved Conjugation, 64-Cu Radiolabeling, in Vivo Stability, and Imaging Using Nonprotected Bifunctional Macrocyclic Ligands: Bis(Phosphinate) Cyclam (BPC) Chelators
David, T.; Hlinová, V.; Kubíček, V.; Bergmann, R.; Striese, F.; Berndt, N.; Szöllösi, D.; Hegedus, N.; Mathe, D.; Bachmann, M.; Pietzsch, H.-J.; Hermann, P.
Abstract
Bifunctional derivatives of bis(phosphinate)-bearing cyclam (BPC) chelators bearing a carboxylate, amine, isothiocyanate, azide, or cyclooctyne in the BP side chain were synthesized. Conjugations required no protection of phosphinate or ring secondary amine groups. The ring amines were not reactive (proton protected) at pH < ∼8. For isothiocyanate coupling, oligopeptide N-terminal α-amines were more suitable than alkyl amines, e.g., Lys ω-amine (pKa ∼7.5−8.5 and ∼10−11, respectively) due to lower basicity.
The Cu-64 labeling was efficient at room temperature (specific activity ∼100 GBq/μmol; 25 °C, pH 6.2, ∼100 ligand equiv, 10 min). A representative Cu-64-BPC was tested in vivo showing fast clearance and no nonspecific radioactivity deposition. The monoclonal anti-PSCA antibody 7F5 conjugates with thiocyanate BPC derivative or NODAGA were radiolabeled and studied in PC3-PSCA tumor bearing mice by PET. The radiolabeled BPC conjugate was accumulated in the prostate tumor with a low off-target uptake, unlike Cu-64-labeled NODAGA−antibody conjugate. The BPC chelators have a great potential for theranostic applications of the Cu-64/Cu-67 matched pair.
Involved research facilities
- PET-Center
-
Journal of Medicinal Chemistry 61(2018), 8774-8796
DOI: 10.1021/acs.jmedchem.8b00932
Cited 21 times in Scopus
Permalink: https://www.hzdr.de/publications/Publ-28015
Progress on High Peak Current Laser Wakefield Electron Acceleration
Abstract
Report on the generation of multi 10 kA electron bunches with LWFA and related applications.
Involved research facilities
- Radiation Source ELBE DOI: 10.17815/jlsrf-2-58
Related publications
- DOI: 10.17815/jlsrf-2-58 is cited by this (Id 28014) publication
-
Invited lecture (Conferences)
60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS2018), 05.-09.03.2018, Shanghai, China
Permalink: https://www.hzdr.de/publications/Publ-28014
From plasma acceleration to accelerators ?
Abstract
Status of PW laser experiments
Involved research facilities
- Radiation Source ELBE DOI: 10.17815/jlsrf-2-58
Related publications
- DOI: 10.17815/jlsrf-2-58 is cited by this (Id 28013) publication
-
Invited lecture (Conferences)
OPIC OPTICS & PHOTONICS International Congress, 23.-26.04.2018, Pacifico Yokohama, Japan -
Invited lecture (Conferences)
Freitagsseminar IAP-Frankfurt, 22.06.2018, Frankfurt, Deutschland -
Invited lecture (Conferences)
HICforFAIR-Kolloquium Giessen, 21.06.2018, Giessen, Deutschland
Permalink: https://www.hzdr.de/publications/Publ-28013
Years: 2023 2022 2021 2020 2019 2018 2017 2016 2015
Pages: [1.] [2.] [3.] [4.] [5.] [6.] [7.] [8.] [9.] [10.] [11.] [12.] [13.] [14.] [15.] [16.] [17.] [18.] [19.] [20.] [21.] [22.] [23.] [24.] [25.] [26.] [27.] [28.] [29.] [30.] [31.] [32.] [33.] [34.] [35.] [36.] [37.] [38.] [39.] [40.] [41.] [42.] [43.] [44.] [45.] [46.] [47.] [48.] [49.] [50.] [51.] [52.] [53.] [54.] [55.] [56.] [57.] [58.] [59.] [60.] [61.] [62.] [63.] [64.] [65.] [66.] [67.] [68.] [69.] [70.] [71.] [72.] [73.] [74.] [75.] [76.] [77.] [78.] [79.] [80.] [81.] [82.] [83.] [84.] [85.] [86.] [87.] [88.] [89.] [90.] [91.] [92.] [93.] [94.] [95.] [96.] [97.] [98.] [99.] [100.] [101.] [102.] [103.] [104.] [105.] [106.] [107.] [108.] [109.] [110.] [111.] [112.] [113.] [114.] [115.] [116.] [117.] [118.] [119.] [120.] [121.] [122.] [123.] [124.] [125.] [126.] [127.] [128.] [129.] [130.] [131.] [132.] [133.] [134.] [135.] [136.] [137.] [138.] [139.] [140.] [141.] [142.] [143.] [144.] [145.] [146.] [147.] [148.] [149.] [150.] [151.] [152.] [153.] [154.] [155.] [156.] [157.] [158.] [159.] [160.] [161.] [162.] [163.] [164.] [165.] [166.] [167.] [168.] [169.] [170.] [171.] [172.] [173.] [174.] [175.] [176.] [177.] [178.] [179.] [180.] [181.] [182.] [183.] [184.] [185.] [186.] [187.] [188.] [189.] [190.] [191.] [192.] [193.] [194.] [195.] [196.] [197.] [198.] [199.] [200.] [201.] [202.] [203.] [204.] [205.] [206.] [207.] [208.] [209.] [210.] [211.] [212.] [213.] [214.] [215.] [216.] [217.] [218.] [219.] [220.] [221.] [222.] [223.] [224.] [225.] [226.] [227.] [228.] [229.] [230.] [231.] [232.] [233.] [234.] [235.] [236.] [237.] [238.] [239.] [240.] [241.] [242.] [243.] [244.] [245.] [246.] [247.] [248.] [249.] [250.] [251.] [252.] [253.] [254.] [255.] [256.] [257.] [258.] [259.] [260.] [261.] [262.] [263.] [264.] [265.] [266.] [267.] [268.] [269.] [270.] [271.] [272.] [273.] [274.] [275.] [276.] [277.] [278.] [279.] [280.] [281.] [282.] [283.] [284.] [285.] [286.] [287.] [288.] [289.] [290.] [291.] [292.] [293.] [294.] [295.] [296.] [297.] [298.] [299.] [300.] [301.] [302.] [303.] [304.] [305.] [306.] [307.] [308.] [309.] [310.] [311.] [312.] [313.] [314.] [315.] [316.] [317.] [318.] [319.] [320.] [321.] [322.] [323.] [324.] [325.] [326.] [327.] [328.] [329.] [330.] [331.] [332.] [333.] [334.] [335.] [336.] [337.] [338.] [339.] [340.] [341.] [342.] [343.] [344.] [345.] [346.] [347.] [348.] [349.] [350.] [351.] [352.] [353.]